Products catalog

Home/Product Catalog/Automation and Control Systems/Control components for automation and control systems/Buttons for automation control | control systems
  • New item   Push button STOP | 22 mm | red | non-illuminated | IP40 | non-latching | IEK SB-7 | BBT40-SB7-K04

    Push button STOP | 22 mm | red | non-illuminated | IP40 | non-latching | IEK SB-7 | BBT40-SB7-K04

    Code: BBT40-SB7-K04
    Barcode: 4606056033083
    Inquire about this item
    Price 1.15 € VAT incl.
    ( 0.95 € VAT excl. )

    BBT40-SB7-K04 is a IEK SB-7 series stop (STOP) red control push button, non-illuminated.

  • Product description

    Push button STOP | 22 mm | red | non-illuminated | IP40 | non-latching | IEK SB-7 | BBT40-SB7-K04

    BBT40-SB7-K04 is a IEK SB-7 series stop (STOP) red control push button, non-illuminated. It is mounted in a Ø 22 mm hole in a panel door, control desk or push button enclosure and is used to control contactors, relays and controller inputs.

    Technical data

    Product type Control push button STOP
    Code BBT40-SB7-K04
    Series IEK SB-7
    Colour red
    Contacts check the contact block marking
    Illumination non-illuminated
    Action spring return (non-latching)
    Degree of protection IP40
    Series rated voltage up to 660 V AC / 400 V DC
    Mounting hole Ø 22 mm

    Where is it used?

    • Control panels for pumps, fans and compressors
    • Motor control via a contactor
    • Commands in automation panels and PLC inputs
    • Push button enclosures at machines

    Safety and installation notes

    • Installation must be performed by a qualified electrician after disconnecting the voltage and verifying that there is none.
    • The button is intended for the control circuit: motor current is switched by a contactor.
    • Use an NC contact for STOP and an NO contact with contactor self-holding for START.

    Push button STOP | 22 mm | red | non-illuminated | IP40 | non-latching | IEK SB-7 | BBT40-SB7-K04

    BBT40-SB7-K04 is a control push button for a Ø 22 mm hole. Need buttons for a whole panel? Send us the diagram – we will select them and send a quote.

    Published: 2026-11-05 · Data verified against the manufacturer catalogue marking: 2026-11-05

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Alternative products

    Cable gland with locknut and gasket | PG7 | for cable Ø3–6.5 mm | grey | IP68 | 4772124000810 New item  
    Cable gland with locknut and gasket | PG7 | for cable Ø3–6.5 mm | grey | IP68 | 4772124000810
    Code: 00810

    Plastic PG7 cable gland with locknut and gasket for routing Ø3–6.5 mm round cables into distribution boards and junction boxes. Provides IP68 sealing when correctly installed.

    Price 0.20 € VAT incl.
    ( 0.17 € VAT excl. )
    Add to cart 
    Crane control panel | with 4 buttons | 5A | 120–400V | IP54 Top seller  
    Crane control panel | with 4 buttons | 5A | 120–400V | IP54
    Code: BPU10-4

    Button control panels are designed for switching electrical control circuits of lifting mechanisms. The sealed IP54 enclosure is made of heat-resistant ABS plastic with built-in buttons. A protective gland is provided to seal the cable entry, and a sealing gasket is installed between the enclosure and the panel.

    The buttons meet the "CE" standard requirements in terms of design and technical specifications.

    The remote control panels have passed certification tests and have received serial production conformity certificates.
    Available with 2, 4, or 6 buttons.
    The housing is made of non-flammable ABS plastic.
    The cable entry includes a protective gland that prevents moisture and dust from entering the housing. 

    Price 20.57 € VAT incl.
    ( 17.00 € VAT excl. )
    Add to cart 
  • privacy policy

    Information