Products catalog

  • Radial scroll-housing fan | right-hand | 2-pole motor | 380V | D136 | 315×275×233mm | steel | blue | Turbo Balance Plus 140 2P 380 D | 4772318505133

    Code: 03041
    Barcode: 4772318505133

    Radial scroll-housing fan Turbo Balance Plus 140 2P 380 D: 2-pole motor, 380 V, up to 800 m³/h and 950 Pa, right-hand outlet, steel housing IP44. Designed for ducted ventilation.

  • Radial scroll-housing fan | right-hand | 2-pole motor | 380V | D136 | 315×275×233mm | steel | blue | Turbo Balance Plus 140 2P 380 D

    Radial (centrifugal) fan with a scroll housing for local or general supply and exhaust ventilation with an extensive duct network. The 2-pole 380 V motor delivers up to 800 m³/h airflow and up to 950 Pa pressure, and the right-hand outlet makes connection to the duct run easy.

    Key point:
    Balance Plus series – higher-pressure model for longer and more complex duct networks. Powder-coated steel housing, galvanised steel impeller with forward-curved blades and IP44 protection – a reliable choice for workshops, warehouses, boiler rooms and commercial premises.
    Airflow
    800 m³/h
    Pressure
    950 Pa
    Power / voltage
    195 W / 380 V
    Noise
    60 dB(A)

    We will help you set up speed and automatic control

    We will advise how to adjust this fan's speed and how to switch or control it automatically according to room conditions – humidity, temperature or CO₂ concentration. We will select a suitable speed controller, thermostat, humidity or CO₂ sensor and explain how to connect them.

    Contact us: tel. +370 658 01033 or e-mail info@elsprendimai.eu

    In your e-mail, briefly describe the situation: room purpose and size, fan model and what you want to control – speed, humidity, temperature or CO₂.

    Wholesale quantities: special prices for larger orders. State the required quantity in your e-mail and we will send you an individual offer.

    Operating principle

    The forward-curved impeller draws air in through the axial inlet, protected by a metal mesh, and the scroll housing directs it to the outlet. This design generates higher pressure than axial fans, overcoming the resistance of ducts, grilles and filters.

    The 2-pole motor runs faster (≈2800 rpm at 50 Hz), delivering higher airflow and pressure at a higher noise level. The outlet position (right-hand) is defined as seen from the motor side – check on which side the duct will be connected before ordering.

    Why choose this fan?
    High pressure in a compact body – one fan serves a whole duct system, and wall or ceiling mounting saves space.

    Technical specifications

    Product type Radial (centrifugal) scroll-housing fan
    Model Turbo Balance Plus 140 2P 380 D
    Code 03041
    Series Turbo Balance Plus (higher pressure)
    Motor 2-pole motor
    Power supply three-phase, 380 V, 50 Hz
    Power 195 W
    Max. airflow 800 m³/h
    Max. pressure 950 Pa
    Noise level 60 dB(A)
    Outlet right-hand (seen from motor side)
    Connection diameter Ø136 mm
    Dimensions (W × H × D) 315×275×233 mm
    Housing Cold-rolled steel, powder coated
    Impeller Galvanised steel, forward-curved blades
    Bearings Ball bearings
    Protection class IP44
    Colour blue
    Mounting Wall or ceiling
    Warranty 24 months
    EAN 4772318505133
    Country of origin Turkey

    Main functions

    • High pressure – Up to 950 Pa – overcomes the resistance of long ducts, filters and grilles.
    • Airflow – Up to 800 m³/h for local or general ventilation.
    • Protected inlet – Metal mesh prevents foreign objects from entering.
    • Durable housing – Powder-coated steel, IP44 protection against particles and water splashes.
    • Speed control – Speed can be controlled with a frequency inverter or a three-phase autotransformer controller.

    Where is it used?

    • Production halls and workshops
    • Warehouses and logistics premises
    • Boiler rooms and plant rooms
    • Car services and garages
    • Commercial kitchen extraction (with grease filters)
    • Ducted supply and exhaust systems

    Use by need

    For installers.
    Left-hand and right-hand outlet versions let you match the fan to the duct route.
    For businesses.
    One fan serves the duct network of several rooms – less equipment and maintenance.
    For designers.
    Clear data – airflow, pressure, power and dimensions – make selection against the system curve easy.

    Practical application

    When selecting the fan, calculate the required air volume and duct network resistance: the stated 800 m³/h is achieved at zero resistance, and airflow falls as pressure rises. For longer networks choose a 2-pole or Plus series model; for quieter operation choose 4-pole.

    Pros

    • Up to 800 m³/h airflow
    • Up to 950 Pa pressure
    • Steel housing, IP44
    • Ball bearings – long service life
    • Left-hand and right-hand versions

    Cons / limitations

    • Louder than duct fans – silencers recommended
    • Outlet side cannot be changed later
    • Not certified for fire smoke extraction systems
    • Airflow drops as duct resistance increases

    Safety and installation notes

    • Installation and connection must be carried out by a qualified electrician
    • Fit a circuit breaker and motor protection in the supply circuit
    • Mount the fan on a solid base with anti-vibration mounts
    • Disconnect power before maintenance
    • Keep inlet and outlet unobstructed
    • Do not use in explosive atmospheres or for aggressive gases

    Quick selection guide

    800 m³/h
    950 Pa
    195 W
    IP44
    Suitable when you need:
    • ventilate a workshop, warehouse or production hall via ducts
    • extract air from several rooms with one fan
    • build a supply system with filters and a heater
    Check before use:
    • the supply voltage matches (380 V)
    • on which side the outlet duct will be connected
    • the pressure is sufficient for your duct network
    • a suitable place and solid base for mounting
    Important reminder: A radial fan works efficiently only when its curve matches the resistance of the duct system.

    FAQ

    What is the difference between left-hand and right-hand versions?
    The outlet position as seen from the motor side. Technical data are identical.
    What is the difference between 2-pole and 4-pole motors?
    A 2-pole motor runs at ≈2800 rpm and delivers higher airflow and pressure; a 4-pole motor runs at ≈1400 rpm and is quieter.
    Can the speed be controlled?
    Yes. Speed can be controlled with a frequency inverter or a three-phase autotransformer controller.
    Is it suitable for fire smoke extraction?
    No. The fan is intended for general ventilation and is not certified for smoke extraction systems.
    Can it be installed outdoors?
    Only under a canopy protected from direct rain: IP44 protects against splashes, not downpours.
    What duct diameter is connected?
    Connection diameter is Ø136 mm. Check the connection dimensions against your duct system before installation.

    Turbo Balance Plus 140 2P 380 D radial fan 800 m³/h, 950 Pa

    Radial scroll-housing fan Turbo Balance Plus 140 2P 380 D: 2-pole motor, 380 V, up to 800 m³/h and 950 Pa, right-hand outlet, steel housing IP44. Designed for ducted ventilation.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Subscribtion to new arrivals

    privacy policy

    Information