Radiator feet | for VP / ECO / NP / NEO C/H / CLEA H / TPA / H30 H / H40 H / H60 H radiators | black | 2 pcs. | Adax | P

Radiator feet | set of 2 | floor-standing installation | black | VP / ECO / NP / NEO C/H / CLEA H / TPA / H30 H / H40 H / H60 H

Radiator feet set designed for placing compatible electric radiators on the floor instead of standard wall mounting. The set includes 2 black feet suitable for VP, ECO, NP, NEO C/H, CLEA H, TPA, H30 H, H40 H and H60 H radiator series. The feet are mounted to the rear panel of the radiator after removing the wall-mounting bracket.

These feet allow a compatible electric radiator to be used as a floor-standing heater without mounting it to the wall. If the radiator is used as a stationary floor-standing heater, the feet can additionally be fixed to the floor. If the radiator is intended to be used as a mobile heater, the feet can be used without fixing them to the floor.

The feet set is intended for the following electric radiator series:

• VP;
• ECO;
• NP;
• NEO C/H;
• CLEA H;
• TPA;
• H30 H;
• H40 H;
• H60 H.

1. Disconnect the radiator from the electrical supply.
2. Place the radiator so that the rear side can be accessed easily without damaging the housing.
3. Remove the bracket intended for wall mounting.
4. Attach both feet to the rear panel of the radiator.
5. Check that both feet are securely attached and that the radiator stands firmly.
6. If the radiator will be used in a fixed location, secure the feet to the floor if required.
7. If the radiator will be used as a mobile heater, the feet do not need to be fixed to the floor.

• When an electric radiator should not or cannot be mounted on the wall.
• For temporary heating in residential rooms.
• In offices, workrooms and workplaces.
• In rented premises where drilling into walls is undesirable.
• In rooms where the radiator is periodically moved to another location.
• For converting compatible radiators into floor-standing heaters.

• Before installing the feet, the radiator must be disconnected from the electrical supply.
• The feet must only be attached to the mounting points provided in the structure of a compatible radiator.
• Check the stability of the radiator before use.
• If the radiator is placed where there is an increased risk of accidental tipping, it is recommended to secure the feet to the floor.
• When using the radiator as a mobile heater, follow the radiator manufacturer's safe-use requirements and minimum clearance distances.
• Compatibility with radiator models not listed is not confirmed.

Radiator feet | 2 pcs. | black | for floor-standing installation

Black radiator feet designed for placing VP, ECO, NP, NEO C/H, CLEA H, TPA, H30 H, H40 H and H60 H series electric radiators on the floor. The set contains 2 feet that are attached to the rear radiator panel after removing the wall bracket. The feet can be fixed to the floor for stationary use or left unfixed when the radiator is used as a mobile floor-standing heater.