Sealed connector box with gel filling | 30x42x26 | 3x4-6mm² | IPX8

Technical Specifications:

Wire/Cable Cross-Section: 3 x 1–6 mm²​

Connector Type: Inline connector, 3 terminals (4 mm² or 6 mm²)​

Dimensions: 63 x 41 x 28 mm​

Operating Temperature: up to +90 °C​

Installation Temperature: from –40 °C to +50 °C​

Protection Class: IPX8 (fully submersible)​

Gel:

Halogen-free​

UL 94-HB flammability rating​

UV-resistant​

Not classified as hazardous under CLP directive​

No expiration date​

Standards:

CEI EN 50393​

CEI 64-8, Class 2 (electrical safety)​

Installation: Ready to use, no additional preparation required​

Application: Indoor, outdoor, underwater, underground​

Functions:

Ensures protection of electrical connections from moisture, dirt, UV radiation​

Resistant to chemical agents and aging​

Can be used in any position – even submerged​

Reduces risk from improperly insulated connections​

Compatible with various wire types and cross-sections​

Usage:

Protection of electrical installations in household and industrial settings​

Wire management and insulation in electrical panels​

Cable connections in gardens, yards, damp or flooded areas​

Earthworks and lighting systems​

Maritime and pool installations​

Emergency or temporary connections​

Pros:

Ready to use – no additional materials needed​

Fully hermetic (IPX8) – suitable for underwater use​

Resistant to UV radiation and temperature fluctuations​

Environmentally safe gel – non-hazardous, halogen-free​

Suitable for both domestic and industrial use​

Complies with standards (CEI EN 50393, CEI 64-8)​

Requires no maintenance or periodic replacement​

Cons:

Only for inline connections (not suitable for branched connections without additional accessories)​

May be too large for very small installation spaces​

Not suitable for very large diameter wires (>6 mm²)