Smart door lock with IC card reader | fingerprint | PIN code | TUYA app unlocking | for glass doors | 235x65mm | black

Smart Glass and Aluminium Door Lock | Tuya Wi-Fi | fingerprint | PIN | IC card | APP | mechanical key

Slim-profile smart electronic door lock designed for aluminium-profile doors, glass office partitions and other compatible door constructions. Unlocking is possible by fingerprint, PIN code, IC access card, Tuya app or mechanical key. Supports remote administration – doors can be unlocked remotely, temporary passwords can be created, users can be managed and unlocking history can be reviewed.

This is a smart access-control lock combining biometric fingerprint recognition, PIN-code and card access, as well as remote management through the Tuya ecosystem. It is particularly suitable for office glass partitions and narrow-profile aluminium doors where compact dimensions, modern appearance and centralised user administration are important.

When connected to the Tuya system, access can be managed over the internet, temporary passwords can be generated, unlocking records can be reviewed and users can be administered remotely.

• Remote door unlocking.
• Remote access authorisation.
• Generation of temporary PIN passwords.
• Adding and removing users.
• Viewing unlocking history.
• Downloading unlocking records.
• Viewing usage / attendance statistics.
• Remote locking and unlocking control.
• Scheduled “Normally Open” mode.
• Automatic locking time setting.
• Warnings and abnormal-status information.

A fingerprint does not require carrying a card or remembering a PIN code. The semiconductor sensor is also designed to better distinguish a real finger from a simple fingerprint copy.

• Fingerprint unlocking.
• PIN-code unlocking.
• IC-card unlocking.
• Tuya app control.
• WiFi remote unlocking.
• Emergency unlocking with a mechanical key.
• Generation of temporary PIN codes.
• Remote user administration.
• Viewing unlocking history.
• Downloading unlocking records.
• Attendance statistics.
• Automatic locking time setting.
• Scheduled “Normally Open” mode.
• Left / right door direction adjustment.
• Anti-insertion type lock-latch design.
• Break-in / tamper warning.
• Incorrect PIN-entry warning.
• Low-battery warning.
• Integrated doorbell.
• Voice prompts.

The administrator does not need to physically hand over a card or key. A temporary PIN code can be generated remotely through the Tuya app and sent to a visitor, employee, cleaning staff or service personnel. This is convenient when access is required only for a limited period.

A specific time interval can be set during which the lock remains unlocked. After the set period ends, the lock returns to normal access-control mode. This function is practical in offices, shops, reception areas and other places where doors need to remain freely accessible during working hours and controlled at other times.

A delay can be set after which the door automatically locks again. This reduces the risk of the door remaining unlocked after entry due to user forgetfulness.

According to the installation diagram, the lock is designed for 8–15 mm thick glass. Two Ø45 mm mounting holes are required. The centre of the first hole is approximately 60 mm from the edge of the door, while the centre-to-centre distance between the two holes is approximately 63–65 mm.

The construction can be used for both left-hand and right-hand opening doors when the installation direction is selected correctly.

If the hole arrangement of the existing mechanical glass-partition lock matches the installation pattern of this model, it can be replaced without drilling new holes. Before replacing the lock, check the Ø45 mm hole diameter, centre-to-centre spacing and distance from the glass edge.

• Break-in / lock-tampering warning.
• Incorrect PIN-entry warning.
• Low-battery warning.
• Anti-insertion type lock latch.
• Unlocking history logging.
• Remote event review in the app.
• Mechanical backup unlocking.
• Emergency power capability.

• Office glass-partition doors.
• Aluminium-profile doors.
• Narrow-frame aluminium doors.
• “Thermal break” type aluminium doors.
• Administrative premises doors.
• Meeting and conference rooms.
• Commercial premises doors.
• Premises requiring centralised access control.
• Sites requiring temporary or remotely granted access.

• Before installation, check the door type, profile construction and installation location.
• For glass doors, verify the 8–15 mm glass thickness and mounting-hole dimensions.
• Do not drill already tempered glass.
• If existing holes are present, measure their diameter and centre-to-centre spacing before ordering.
• Keep the mechanical emergency key in a separate secure location.
• The emergency power interface is intended for temporary power, not for continuous lock power.
• Before final installation, check the left / right opening-direction setting.
• After installation, test all unlocking methods used and the mechanical key function.

Tuya WiFi Smart Glass Door Lock | fingerprint | PIN | IC card | APP

Slim-profile smart electronic lock for aluminium doors and 8–15 mm glass partitions. Supports fingerprint, PIN code, IC card, Tuya app and mechanical-key unlocking. The WiFi version allows remote access control, temporary password generation, user administration, unlocking-history review and configuration of automatic locking and “Normally Open” modes.