Smart electric radiator with thermostat | 1000W | 230V | 325x848x105-130mm | Bluetooth | IP24 | white | ADAX VPS1010 BT

Electric radiator | for bathrooms and humid rooms | Bluetooth programmable | 1000 W | 325 × 848 × 105–130 mm | IP24 | up to 60 °C | for fixed electrical installation | ADAX VPS1010 BT

ADAX VPS1010 BT – a 1000 W electric convection radiator with an electronic / Bluetooth programmable thermostat. This is the highest-power version among the presented VPS10 BT models, while retaining IP24 protection, double insulation and a touchable surface temperature limited to 60 °C.

The model is intended for bathrooms, laundry rooms, children's rooms and other spaces where a fixed electrical connection is important. The radiator is supplied with a cable without a plug for fixed electrical installation. Temperature adjustment range – 5–35 °C.

ADAX VPS1010 BT provides 1000 W rated power and features IP24 protection, double insulation, overheating protection and a surface temperature limited to 60 °C. Model dimensions – 325 × 848 × 105–130 mm, with connection intended for a fixed electrical installation.

Default setting: 22 °C. Temperature adjustment range – 5–35 °C.

Touchable radiator surfaces do not heat above 60 °C. This is one of the most important distinguishing features of the VPS10 series and is relevant in bathrooms, children's rooms and other spaces where a reduced radiator surface temperature is preferred.

ADAX VPS1010 BT is supplied with a cable without a plug. The radiator is not intended for direct connection to a socket – it is connected to a fixed electrical installation. Connection work must be carried out by a qualified electrician.

The main function of the app is management of the radiator operating schedules.

Temperature cannot be controlled directly in the app. Temperature is set with the radiator control knob. To synchronize schedules and functions, you must be within Bluetooth range.

1. Download the ADAX WiFi app from the Apple or Google app store.
2. In the app, select “+Add device”.
3. Press “Next”.
4. Select “Eco BT Bluetooth only heater”.
5. Turn the temperature control knob between the minimum and maximum positions until the indicator starts flashing.
6. A flashing indicator shows that the radiator is ready to connect.
7. Once the radiator is detected, follow the instructions shown in the app.

• Standby mode – indicators are off.
• Heating – the indicator lights while the radiator is actively heating.
• Ready to connect – a flashing indicator shows connection mode.
• Child protection – indication of an activated lock.
• Factory reset – the corresponding indication shows the reset process.

In the event of a power failure, the radiator maintains operation of its internal clock for up to 24 hours. If the power interruption lasts longer than 24 hours, the thermostat returns to the last used temperature.

Adaptive start calculates when heating must begin so that the desired room temperature is reached at the time set by the user.

When a sudden temperature drop is detected, the radiator stops normal heating and switches to 7 °C frost-protection mode. When the window is closed and the room temperature starts rising again, the radiator returns to the previous program or constant-temperature mode.

Thermostat controls can be protected against unauthorized use by children or other persons. The function is managed in the ADAX app.

To restore factory settings, turn the temperature control knob between the minimum and maximum positions until the factory reset indicator starts flashing.

• Bathrooms.
• Laundry rooms.
• Children's rooms.
• Residential premises.
• Offices and commercial premises.
• Rooms where 1000 W rated power and fixed electrical connection are required.

1. The radiator is mounted on the wall using the bracket supplied.
2. Leave at least 120 mm above the radiator.
3. Leave at least 50 mm below the radiator.
4. The thermostat is located on the right-hand side of the radiator.
5. The radiator does not have a plug and is connected to a fixed electrical installation.
6. Electrical safety zones and installation requirements must be observed in bathrooms and other humid rooms.
7. Connection must be carried out by a qualified / certified electrician.

• 1000 W is the rated power of this model.
• Radiator power must be selected according to the room's heat loss.
• Maximum temperature of touchable surfaces – 60 °C.
• The BT version does not have a plug for connection to a socket.
• Bluetooth function synchronization requires being within Bluetooth range.
• Temperature cannot be controlled directly in the app.
• Overheating protection is included.
• The radiator air circulation openings must not be covered.

ADAX VPS1010 BT | electric radiator | 1000 W | IP24 | up to 60 °C | for fixed installation

ADAX VPS1010 BT – a 1000 W white electric convection radiator with an electronic / Bluetooth programmable thermostat. Dimensions 325 × 848 × 105–130 mm, IP24 protection rating, double insulation, touchable surface temperature up to 60 °C, 5–35 °C temperature adjustment and overheating protection. The BT version is supplied with a cable without a plug for fixed electrical installation. A 5-year warranty is provided.