Smart electric radiator with thermostat | 600W | 230V | 325x542x105-130mm | Bluetooth | IP24 | white | ADAX VPS1006 BT

Electric radiator | for bathrooms and humid rooms | Bluetooth programmable | 600 W | 325 × 542 × 105–130 mm | IP24 | up to 60 °C | for permanent installation | ADAX VPS1006 BT

ADAX VPS1006 BT – 600 W electric convector radiator with an electronic / Bluetooth programmable thermostat. VPS10 series radiators are designed for rooms where higher requirements apply to electric heating equipment – bathrooms, laundry rooms and other humid areas.

The radiator has an IP24 protection rating, double insulation, overheating protection, and touchable surfaces do not heat above 60 °C. This BT version is supplied with a cable without a plug and is intended for connection to a permanent electrical installation.

ADAX VPS1006 BT is a 600 W convector radiator with dimensions of 325 × 542 × 105–130 mm. The model is intended for fixed electrical connection and features an electronic / Bluetooth programmable thermostat, IP24 protection and a touchable surface temperature limited to 60 °C.

Default setting: when the radiator is switched on, the temperature is set to 22 °C. The temperature control knob allows selection of the desired temperature from 5 to 35 °C.

Touchable surfaces of VPS10 series radiators do not heat above 60 °C. This is practical in bathrooms, laundry rooms, children's rooms and other areas where a lower radiator surface temperature is preferred.

ADAX VPS1006 BT does not have a plug. The radiator is supplied with a cable intended for connection to a permanent electrical installation. This is the main difference between the BT version and the KBT version, which is supplied with a cable and plug for connection to a wall socket.

The main function of the ADAX app is management of the radiator operating schedules.

The radiator temperature cannot be changed directly in the app. Temperature is set with the radiator control knob. To synchronise schedules and additional functions, you must be within Bluetooth range.

1. Download the ADAX WiFi app from the Apple or Google app store.
2. In the app, select „+Add device“.
3. Press „Next“.
4. Select „Eco BT Bluetooth only heater“.
5. Turn the temperature control knob between the minimum and maximum positions until the indicator starts flashing.
6. A flashing indicator means the radiator is ready to connect.
7. Once the radiator is detected, follow the instructions in the app.

• Standby mode – indicators remain off until the ambient temperature drops.
• Heating – the indicator is illuminated while the radiator is actively heating.
• Ready to connect – a flashing indicator shows connection mode.
• Child lock – the indication shows that the lock is activated.
• Factory reset – the corresponding indication shows the reset process.

In the event of a power failure, the radiator maintains the operation of the internal clock for up to 24 hours. If the power supply is interrupted for more than 24 hours, the thermostat returns to the last used temperature.

Adaptive start is used via the app. The function allows the radiator to calculate when heating should begin so that the desired temperature has already been reached at the time selected by the user.

The open-window function detects a rapid temperature change over a short period of time. When an open window is detected, heating is automatically switched off and the radiator changes to frost-protection mode maintaining a temperature of 7 °C. Once the window is closed and the room temperature begins to rise again, the radiator returns to the previous programme or constant-temperature mode.

The thermostat can be protected against unauthorised use by children or other persons. This function is enabled or disabled in the ADAX app.

To restore the factory settings, turn the temperature control knob between the minimum and maximum positions until the factory reset indicator starts flashing.

• Bathrooms.
• Laundry rooms and other humid areas.
• Children's rooms.
• Residential rooms.
• Commercial and utility premises.
• Projects where permanent radiator connection is planned.

1. The radiator is fixed to the wall using the bracket included in the set.
2. Leave at least 120 mm above the radiator.
3. Leave at least 50 mm below the radiator.
4. The thermostat is located on the right side of the radiator.
5. The radiator is supplied with a cable without a plug and is connected to a permanent electrical installation.
6. In bathrooms and other humid rooms, applicable electrical safety zones and installation requirements must be observed.
7. Connection must be carried out by a qualified / certified electrician.

• 600 W is the nominal power of this model.
• Radiator power must be selected according to the heat loss of the specific room.
• Maximum touchable surface temperature – 60 °C.
• The model is not intended for direct connection to a wall socket using a plug.
• Bluetooth functions require being within Bluetooth range for synchronisation.
• The temperature cannot be directly controlled in the app.
• The radiator has overheating protection.
• The radiator air circulation openings must not be covered.

ADAX VPS1006 BT | electric radiator | 600 W | IP24 | Bluetooth | for permanent installation

ADAX VPS1006 BT – 600 W white electric convector radiator with an electronic / Bluetooth programmable thermostat. Dimensions 325 × 542 × 105–130 mm, IP24 protection rating, double insulation, touchable surface temperature up to 60 °C, 5–35 °C temperature adjustment and overheating protection. The BT version is supplied with a cable without a plug for permanent electrical installation. A 5-year warranty is provided.