Smart electric radiator with thermostat | 800W | 230V | 325x696x105-130mm | Bluetooth | IP24 | white | ADAX VPS1008 BT

Electric radiator | for bathrooms and humid rooms | Bluetooth programmable | 800 W | 325 × 696 × 105–130 mm | IP24 | up to 60 °C | for permanent installation | ADAX VPS1008 BT

ADAX VPS1008 BT – 800 W electric convector radiator with an electronic / Bluetooth programmable thermostat. The VPS10 series is designed for bathrooms, laundry rooms and other areas where a splash-resistant electric radiator and reduced touchable surface temperature are required.

The model has an IP24 protection rating, double insulation and overheating protection. Touchable surfaces do not heat above 60 °C. The BT version is supplied with a cable without a plug, intended for connection to a permanent electrical installation.

ADAX VPS1008 BT combines 800 W power, IP24 protection, double insulation, surface temperature limited to 60 °C and permanent electrical connection. Model dimensions: 325 × 696 × 105–130 mm.

Default setting: when the radiator is switched on, the temperature is set to 22 °C. Temperature adjustment range – 5–35 °C.

Touchable surfaces of VPS10 series radiators do not heat above 60 °C. This is relevant in bathrooms, children's rooms and other areas where reducing the surface temperature of the heating appliance is important.

VPS1008 BT does not have a plug. The radiator is supplied with a cable intended for connection to a permanent electrical installation. The electrical connection must be carried out by a qualified electrician.

The main function of the app is management of operating schedules.

The radiator temperature cannot be changed directly in the app. Temperature is set using the radiator control knob. To synchronise schedules and functions, you must be within Bluetooth range.

1. Download the ADAX WiFi app from the Apple or Google app store.
2. In the app, select „+Add device“.
3. Press „Next“.
4. Select „Eco BT Bluetooth only heater“.
5. Turn the temperature control knob between the minimum and maximum positions until the indicator starts flashing.
6. A flashing indication means that the radiator is ready to connect.
7. Continue by following the instructions provided in the app.

• Standby mode – indicators are off.
• Heating – active heating indication.
• Ready to connect – flashing indication.
• Child lock – indication of the activated lock.
• Factory reset – RESET indication.

In the event of a power failure, the radiator maintains the operation of its internal clock for up to 24 hours. If the power supply is interrupted for longer than 24 hours, the thermostat returns to the last used temperature.

Adaptive start allows the radiator to calculate when heating should begin so that the desired temperature is reached in the room at the set time.

When a sudden temperature drop is detected, the radiator stops normal heating and switches to 7 °C frost-protection mode. Once the window is closed and the temperature begins to rise again, the previous mode is restored.

The thermostat controls can be protected against unauthorised use by children or other persons. The function is enabled and disabled in the app.

To restore the factory settings, turn the temperature control knob between the minimum and maximum positions until the factory reset indicator starts flashing.

• Bathrooms.
• Laundry rooms.
• Children's rooms.
• Residential spaces.
• Offices and commercial premises.
• Projects with a planned permanent electrical connection.

1. The radiator is wall-mounted using the bracket included in the set.
2. Leave at least 120 mm above the radiator.
3. Leave at least 50 mm below the radiator.
4. The thermostat is located on the right side of the radiator.
5. The radiator is connected to a permanent electrical installation.
6. In humid rooms, applicable electrical safety zones and installation requirements must be observed.
7. The electrical connection must be carried out by a qualified / certified electrician.

• 800 W is the nominal power of this model.
• Power must be selected according to the heat loss of the specific room.
• Touchable surface temperature is limited to 60 °C.
• The BT version does not have a plug for connection to a wall socket.
• Bluetooth functions require being within Bluetooth range for synchronisation.
• The temperature cannot be controlled directly in the app.
• The radiator has overheating protection.

ADAX VPS1008 BT | electric radiator | 800 W | IP24 | up to 60 °C | for permanent installation

ADAX VPS1008 BT – 800 W white electric convector radiator with an electronic / Bluetooth programmable thermostat. Dimensions 325 × 696 × 105–130 mm, IP24 protection, double insulation, touchable surface temperature up to 60 °C, 5–35 °C temperature adjustment range and overheating protection. The BT version is supplied with a cable without a plug for permanent electrical installation. Warranty – 5 years.