Smart freestanding / wall-mounted electric radiator with thermostat | 1000W | 230V | 330x714x97mm | Bluetooth | IP24 | white | ADAX ECO 10 KBT

Electric radiator | convector | Bluetooth programmable | 1000 W | 330 × 714 × 97 mm | IP24 | white | ADAX ECO10 KBT

ADAX ECO10 KBT – 1000 W electric convector radiator with an electronic / Bluetooth programmable thermostat. The ECO KBT series is designed for simple and economical heating of residential, commercial and other premises.

When the thermostat is not programmed, the radiator operates as a standard electronic thermostat and maintains the manually selected temperature. The temperature can be adjusted within the 5–35 °C range. Bluetooth connection allows operating schedules and additional functions to be programmed.

ADAX ECO10 KBT is a 1000 W convector radiator measuring 330 × 714 × 97 mm. It combines manual temperature control, an electronic thermostat and Bluetooth-programmable daily and weekly heating modes.

The main purpose of the app is management of the radiator operating schedules.

The radiator temperature cannot be changed directly in the app. The temperature is set with the control knob. To synchronise schedules and functions, you must be within Bluetooth range.

1. Download the ADAX WiFi app.
2. Select „+Add device“.
3. Press „Next“.
4. Select „Eco BT Bluetooth only heater“.
5. Turn the control knob between the minimum and maximum positions until the indicator starts flashing.
6. Flashing means the radiator is ready for pairing.
7. Complete the connection by following the instructions in the app.

• Standby mode – indicators are off.
• Heating – active heating indication.
• Ready to connect – flashing indication.
• Child lock – active lock indication.
• Factory reset – RESET indication.

• Residential spaces.
• Bedrooms, living rooms and home offices.
• Apartments and private houses.
• Offices and commercial premises.
• Bathrooms and other more humid rooms, subject to electrical safety requirements.
• Rooms where programmable electric heating is required.

1. The radiator is installed using the wall bracket included in the set.
2. Leave at least 150 mm above the radiator.
3. Leave at least 50 mm below the radiator.
4. The thermostat and power cable are located on the right side of the radiator.
5. For floor-standing use, additional feet are required.
6. In humid rooms, applicable electrical safety requirements must be observed.

• 1000 W is the nominal power of this model.
• The radiator power should be selected according to the heat loss of the specific room.
• Bluetooth connection is required for synchronisation of programmable functions.
• The temperature cannot be controlled directly in the app.
• The maximum temperature of touchable surfaces is 75 °C.
• IP24 does not override installation requirements for humid rooms.
• The radiator must not be covered in a way that restricts air circulation.

ADAX ECO10 KBT | electric radiator | 1000 W | Bluetooth | IP24

ADAX ECO10 KBT – 1000 W white electric convector radiator with an electronic / Bluetooth programmable thermostat. Dimensions 330 × 714 × 97 mm, temperature range 5–35 °C, IP24 protection, double insulation, overheating protection, 1.20 m power cable with plug and a 5-year warranty.