Smart freestanding / wall-mounted electric radiator with thermostat | 2000W | 230V | 330x1374x97mm | Bluetooth | IP24 | white | ADAX ECO 20 KBT

Electric radiator | convector | Bluetooth programmable | 2000 W | 330 × 1374 × 97 mm | IP24 | white | ADAX ECO20 KBT

ADAX ECO20 KBT – 2000 W electric convector radiator with an electronic / Bluetooth programmable thermostat. This is a higher-power model from the ECO KBT series, intended for rooms where a greater electric heating capacity is required according to the heat demand.

Without using the app, the radiator operates as a standard heater controlled by an electronic thermostat and maintains the manually selected temperature. The temperature adjustment range is 5–35 °C. Bluetooth is used for heating schedules and additional functions.

ADAX ECO20 KBT is a 2000 W convector radiator measuring 330 × 1374 × 97 mm. The model retains the low-profile design of the ECO series, but due to its higher output and 1374 mm width it is intended for locations where more wall space is available.

The main purpose of the app is management of the radiator operating schedules.

The radiator temperature cannot be changed directly in the app. The temperature is set with the control knob. To synchronise schedules and functions, you must be within Bluetooth range.

1. Download the ADAX WiFi app.
2. Select „+Add device“.
3. Press „Next“.
4. Select „Eco BT Bluetooth only heater“.
5. Turn the control knob between the minimum and maximum positions until the indicator starts flashing.
6. Flashing indicates that the radiator is ready to connect.
7. Complete the pairing process according to the instructions in the app.

• Standby – indicators are off.
• Heating – active heating indication.
• Ready to connect – flashing indication.
• Child lock – active lock indication.
• Factory reset – RESET indication.

• Residential spaces.
• Living rooms and other rooms requiring higher heating output.
• Apartments and private houses.
• Offices and commercial premises.
• Bathrooms and other more humid rooms, subject to electrical safety requirements.
• Rooms where programmable 2000 W electric heating is required.

1. The radiator is wall-mounted using the bracket included in the set.
2. Leave at least 150 mm above the radiator.
3. Leave at least 50 mm below the radiator.
4. Before installation, the 1374 mm width must be taken into account.
5. The thermostat and cable are located on the right side of the radiator.
6. Floor-standing installation is possible using separately purchased feet.
7. Applicable electrical safety requirements must be observed in humid rooms.

• 2000 W is the nominal power of this model.
• Radiator power should be selected according to the heat loss of the room.
• Due to the 1374 mm width, sufficient free wall space is required.
• Bluetooth functions must be synchronised within Bluetooth range.
• The temperature cannot be controlled directly in the app.
• Touchable surfaces can heat up to 75 °C.
• The radiator air circulation openings must not be covered.

ADAX ECO20 KBT | electric radiator | 2000 W | Bluetooth | IP24

ADAX ECO20 KBT – 2000 W white electric convector radiator with an electronic / Bluetooth programmable thermostat. Dimensions 330 × 1374 × 97 mm, temperature range 5–35 °C, IP24, double insulation, overheating protection, 1.20 m power cable with plug and a 5-year warranty.