Smart freestanding / wall-mounted electric radiator with thermostat | 2000W | 230V | 420x955x87mm | Bluetooth | IP24 | white | ADAX VP12 H20 KBT White

Electric radiator | convection | Bluetooth programmable | 2000 W | 420 × 955 × 87 mm | IP24 | white | ADAX VP12 H20 KBT White

ADAX VP12 H20 KBT White – a 2000 W electric convection radiator with an electronic / Bluetooth programmable thermostat. The VP12 H.. KBT series is designed for residential, commercial and other premises where simple and precise temperature control and programmable heating schedules are required.

When used without the app, the radiator operates like a standard electronically controlled heater and maintains the constant temperature selected with the control knob. Temperature can be adjusted within 5–35 °C, while the default switch-on temperature is 22 °C. Programmable functions are available via Bluetooth connection.

ADAX VP12 H20 KBT White is intended for applications where a higher 2000 W electric heating output is required while retaining simple knob control and programmable heating schedules. Model dimensions are 420 × 955 × 87 mm, while the electronic thermostat maintains the set temperature within the 5–35 °C range.

Default setting: when the radiator is switched on, the temperature is set to 22 °C. Manually, 5–35 °C can be selected.

The main function of the app for this radiator is operating schedule management.

The radiator temperature cannot be changed directly in the app. The temperature is set using the control knob on the radiator. To synchronize schedules and functions, the mobile device must be within Bluetooth range.

1. Download the ADAX WiFi app from the Apple or Google app store.
2. In the app, select “+Add device”.
3. Press “Next”.
4. Select “Eco BT Bluetooth only heater”.
5. Turn the temperature control knob between the minimum and maximum positions until the indicator starts flashing.
6. A flashing indicator means the radiator is ready for pairing.
7. Once the device is detected, complete the connection according to the instructions shown in the app.

• Standby mode – indicators remain off until the room temperature drops.
• Heating – the indicator lights while the radiator is actively heating.
• Ready to connect – flashing indication shows Bluetooth pairing mode.
• Child lock – indication shows that the lock is active.
• Factory reset – corresponding indication shows settings restoration.

In the event of a power failure, the radiator maintains the operation of its internal clock for up to 24 hours. If the interruption lasts longer than 24 hours, the thermostat returns to the last used temperature.

Adaptive start is used through the app. The radiator estimates when heating must start so that the desired room temperature is reached at the set time. For example, if the room must be 22 °C at 09:00, heating may start earlier.

The open-window function detects a rapid room temperature change within a short period. When such a change is detected, the radiator automatically stops normal heating and switches to frost-protection mode, maintaining 7 °C. When the room temperature starts rising again, the radiator returns to the previous program or constant-temperature mode.

The thermostat can be protected against unauthorized use by children or other persons. The function is enabled or disabled in the ADAX WiFi app.

To restore factory settings, turn the temperature control knob between the minimum and maximum positions until the factory reset indicator starts flashing.

• Residential premises.
• Living rooms, bedrooms and workrooms.
• Apartments and detached houses.
• Offices and commercial premises.
• Bathrooms and other humid rooms, provided installation requirements are observed.
• Rooms where higher electric heating output and programmable operating schedules are required.

1. Mount the radiator using the wall brackets supplied.
2. Leave at least 250 mm above the radiator.
3. Leave at least 50 mm below the radiator.
4. The thermostat and power cable are located on the right-hand side of the radiator.
5. The radiator can be placed on the floor using optional feet sold separately.
6. In humid rooms, applicable electrical safety requirements must be observed.

• 2000 W is the rated power of this model.
• Radiator power must be selected according to the heat loss of the specific room.
• Bluetooth programmable functions must be synchronized while within Bluetooth range.
• According to the provided manual, the temperature cannot be controlled directly in the app.
• The front surface temperature may reach up to 75 °C.
• The radiator must not be covered in a way that restricts air circulation.

ADAX VP12 H20 KBT White | electric radiator | 2000 W | Bluetooth | IP24

ADAX VP12 H20 KBT White – a 2000 W white electric convection radiator with an electronic / Bluetooth programmable thermostat. Model dimensions: 420 × 955 × 87 mm, temperature adjustment range 5–35 °C, IP24 protection rating. Supplied with wall brackets and a 1.35 m power cable with plug. The app allows management of operating schedules, adaptive start, open-window detection and child protection.