Smart freestanding / wall-mounted glass electric radiator with thermostat | 250W | 230V | 330x400x97mm | Bluetooth | IP24 | white | ADAX ECO 02 KBT White Glass

Glass electric radiator | convection | Bluetooth programmable | 250 W | 330 × 400 × 97 mm | IP24 | white | ADAX ECO02 KBT White Glass

ADAX ECO02 KBT White Glass – a compact 250 W electric convection radiator with a white glass front panel and an electronic / Bluetooth programmable thermostat. This ECO series version retains the same main heating and programming functions while standing out with its glass front finish.

Without using the mobile app, the radiator operates as a standard electronically controlled heater and maintains the manually selected temperature. Temperature adjustment range – 5–35 °C. Bluetooth connection allows operating schedules to be programmed and additional functions to be used.

ADAX ECO02 KBT White Glass is intended for users who value compact 330 × 400 × 97 mm dimensions, 250 W power and a white glass front panel. The radiator has an electronic / Bluetooth programmable thermostat and can operate either manually or according to schedules set in the app.

Default setting: when switched on, the radiator is set to 22 °C. Temperature can be adjusted from 5 to 35 °C.

This model differs from the standard ECO02 KBT version by its white glass front panel. It gives the radiator a different visual appearance while retaining the compact 330 × 400 × 97 mm dimensions and 250 W rated power.

The main function of the app is management of operating schedules.

The radiator temperature cannot be changed directly in the app. Temperature is set using the radiator control knob. To synchronize schedules and functions, the mobile device must be within Bluetooth range.

1. Download the ADAX WiFi app.
2. Select “+Add device”.
3. Press “Next”.
4. Select “Eco BT Bluetooth only heater”.
5. Turn the temperature control knob between the minimum and maximum positions until the indicator starts flashing.
6. Flashing indicates that the radiator is ready for pairing.
7. Continue according to the instructions shown in the app.

• Standby mode – indicators are off.
• Heating – active heating indication.
• Ready to connect – flashing indication.
• Child protection – active lock indication.
• Factory reset – RESET indication.

• Residential premises.
• Small rooms and utility spaces.
• Apartments and detached houses.
• Offices and commercial premises.
• Bathrooms and other more humid rooms, provided electrical safety requirements are observed.
• Interiors where a white glass radiator front panel is preferred.

1. Install the radiator on the wall using the bracket supplied.
2. Leave at least 150 mm above the radiator.
3. Leave at least 50 mm below the radiator.
4. The thermostat and power cable are located on the right-hand side of the radiator.
5. The radiator can be placed on the floor with optional feet purchased separately.
6. In humid rooms, applicable electrical safety requirements must be observed.

• 250 W is the rated power of this model.
• Radiator power must be selected according to the room's heating requirement.
• This model is distinguished by its white glass front panel.
• Bluetooth functions require the mobile device to be within Bluetooth range for synchronization.
• Temperature cannot be controlled directly in the app.
• Touchable surfaces may heat up to 75 °C.
• Do not cover the radiator in a way that restricts air circulation.

ADAX ECO02 KBT White Glass | glass electric radiator | 250 W | Bluetooth | IP24

ADAX ECO02 KBT White Glass – a 250 W white glass electric convection radiator with an electronic / Bluetooth programmable thermostat. Dimensions 330 × 400 × 97 mm, temperature range 5–35 °C, IP24 protection rating, double insulation, overheating protection, 1.20 m power cable with plug and a 5-year warranty.