Products catalog

  • Smart Industrial Dehumidifier | Moisture Extractor with Integrated Pump | 650W | 230V | 58L/24h | 500m³/h | 810x530x420mm | Metal | Black | Wi-Fi

    Code: ES-FLT-S58M

    Compressor Air Dehumidifier 58 L/24h with WiFi Control – a reliable solution for humidity control in commercial and residential spaces. The device is designed to effectively remove excess moisture from the air, protecting premises from mold, condensation, corrosion, and equipment damage.

    With high performance (up to 58 liters per day), 500 m³/h air circulation, and an intelligent control system, this model is suitable for warehouses, greenhouses, basements, production facilities, server rooms, construction sites, and larger residential areas. 

  • Smart Industrial Dehumidifier | Moisture Extractor with Integrated Pump | 650W | 230V | 58L/24h | 500m³/h | 810x530x420mm | Metal | Black | Wi-Fi

    Industrial compressor dehumidifier for damp rooms and sites. Rated capacity – 58 l/day (30 °C, 80 % RH), airflow – 500 m³/h. The integrated condensate pump lifts the water and discharges it further away.

    Key point:
    Humidity in large rooms damages goods, structures and equipment, and delays work on construction sites. This unit removes up to 58 l of water per day and is suitable where you need to dry a room continuously. When choosing, take temperature into account: in a cool room the actual capacity is lower than the rated one.
    Capacity
    58 l/day (30 °C, 80 % RH)
    Airflow
    500 m³/h
    Power supply
    230 V, single-phase · 650 W
    Condensate
    integrated pump

    Operating principle

    The dehumidifier is placed on a level surface, leaving free space for air intake and discharge.

    The fan draws humid air through the filter and passes it over a cold evaporator. Water vapour condenses on it, and the dry air, after passing through the condenser, returns to the room slightly warmer.

    The integrated pump discharges the collected water to a drain or another location, so the unit can run continuously without attention.

    Why choose the Smart Industrial Dehumidifier 58 l/day?
    High capacity and 500 m³/h airflow allow a single unit to dry a large room, while the integrated pump removes the need to empty a tank.

    Technical specifications

    Product type Smart Industrial Dehumidifier
    Code ES-FLT-S58M
    Dehumidification capacity (30°C, RH 80%) 58 L/24h
    Recommended capacity 50–100 L per day
    Power supply AC 220–240V / 50Hz / 1 phase; 110V / 60Hz / 1 phase
    Power 650W
    Airflow 500 m³/h
    Air filter Class G4
    Operating temperature 5–38°C
    Refrigerant R410A / R22 / R407C
    Dimensions (L×W×H) 530 × 420 × 810 mm
    Weight 35 kg
    Control mechanical + WiFi
    Timer 24 hours
    Construction sheet metal housing

    Main functions

    • Compressor dehumidification – efficiently removes moisture in warm and moderate-temperature rooms.
    • Integrated condensate pump – water can be discharged higher or further away, no tank to empty.
    • Timer – operation can be scheduled around room use.
    • Wi-Fi control – humidity and operating mode can be monitored and changed by phone.

    [object Object]

    • Basements, garages and workshops
    • Construction and renovation sites
    • Rooms after flooding
    • Small warehouses and archives
    • Technical rooms
    • Commercial premises without permanent ventilation

    [object Object]

    For builders and finishers.
    Speeds up drying of plaster, fillers and screeds before the next work.
    For electricians and installers.
    A mobile unit plugged into a 230 V socket, no fixed installation.
    For building managers.
    A quick solution for flooded or damp rooms without major investment.

    Practical application

    If humidity in a room exceeds 70 % after flooding or concreting, close windows and doors, run the dehumidifier with the condensate discharged by the pump and check humidity daily – drying will take less time and finishing can start sooner.

    Advantages

    • Rated capacity 58 l/day, airflow 500 m³/h
    • Integrated condensate pump
    • Control by phone via Wi-Fi
    • Plugs into a standard 230 V socket

    Disadvantages / limitations

    • Below ~10 °C capacity drops sharply – for cold rooms choose a desiccant dehumidifier (available on request)
    • Actual capacity depends on temperature and humidity – the rated value is reached only at 30 °C, 80 % RH

    Safety and installation notes

    • Connect only to an earthed supply; in damp rooms and on construction sites – through a 30 mA RCD.
    • A unit above ~1 kW is best connected to a separate 16 A circuit.
    • Do not place near heat sources or cover the air openings; leave at least 20–30 cm of free space.
    • After transport, allow the refrigerant to settle before switching on (see the manufacturer’s instructions).
    • Disconnect the power and empty the tank before cleaning the filter or moving the unit.

    Quick selection guide

    650W
    230V
    58L/24h
    500m³/h
    810x530x420mm
    Metal
    Black
    Wi-Fi
    Suitable when you need to:
    • Dry a large room
    • Speed up drying of building materials or dry out after flooding
    • Discharge condensate higher or further away with the pump
    Check before use:
    • Room temperature – capacity is lower in cold rooms
    • Whether the socket and circuit can carry a 650 W load
    • Where the condensate will be discharged
    • Dimensions (810 × 530 × 420 mm) and weight (35 kg)
    Important reminder: a dehumidifier does not replace ventilation and does not remove the cause of moisture (leaks, rising damp, thermal bridges) – that must be dealt with separately.

    FAQ

    How much water will this dehumidifier actually remove?
    The rated capacity of 58 l/day is stated at 30 °C and 80 % RH; in a cooler room it will remove less.
    What room size is it suitable for?
    It depends on humidity and temperature; use the category calculator to work out your requirement.
    Is it suitable for an unheated garage in winter?
    Below ~10 °C compressor dehumidifiers work with limited capacity, so for such a room we recommend a desiccant dehumidifier.
    How is the collected water removed?
    By the integrated pump through a hose to a drain or another location.
    What power supply is required?
    A standard earthed 230 V socket.
    Can it run unattended?
    Yes, with the pump the water is discharged continuously, so there is no tank to empty.

    Smart Industrial Dehumidifier 58 l/day | 230 V | 500 m³/h

    Smart Industrial Dehumidifier with 58 l/day rated capacity and 500 m³/h airflow – for humidity control in warehouses, production and construction sites. Use the category guide and capacity calculator to choose.

    Published: 2026-11-18 · Data verified against the supplier specification: 2026-11-18

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Subscribtion to new arrivals

    privacy policy

    Information