Products catalog

  • Smart switch with energy metering | 1-channel | 25A | 5500W | 100-240V | Wi-Fi | SONOFF | POWR3

    Code: POWR3
    Barcode: 6920075776768

    SONOFF POWR3 is a high-power Wi-Fi switch with energy metering (25 A, 5500 W). It shows power, current and voltage, stores history for up to 100 days and cuts the power when a fault is detected. Controlled with the eWeLink app and by voice.

  • Smart switch with energy metering | 1-channel | 25A | 5500W | 100-240V | Wi-Fi | SONOFF | POWR3

    SONOFF POWR3 is a powerful single-channel Wi-Fi switch with energy metering for loads up to 25 A / 5500 W. It switches an appliance or circuit on and off and shows power, current and voltage in real time in the eWeLink app.

    Key idea:
    When you need to control higher-power equipment – a water heater, heater, sauna stove or an entire room circuit – and see its consumption, POWR3 does this without a separate contactor up to 25 A.
    Load
    25 A / 5500 W
    Metering
    power, current, voltage
    Connectivity
    Wi-Fi 2.4 GHz
    History
    up to 100 days, CSV export

    How it works

    The switch is installed in the circuit between the supply and the load: phase and neutral are connected, and the output goes to the controlled appliance or circuit up to 25 A.

    Connected to 2.4 GHz Wi-Fi, POWR3 shows real-time power, current and voltage in the eWeLink app, stores consumption history for up to 100 days and allows export in CSV format.

    By constantly monitoring the parameters, POWR3 automatically cuts the power when it detects a fault, protecting the appliance. The result: remote control, schedules and consumption control.

    Why choose POWR3?
    The 25 A / 5500 W load rating allows direct control of high-power appliances, and energy metering with protective disconnection gives more control than a simple switch.

    Technical specifications

    Product type High-power smart Wi-Fi switch with energy metering
    Manufacturer / model SONOFF POWR3
    Number of channels 1
    Supply voltage 100–240 V AC, 50/60 Hz
    Max. current / power 25 A / 5500 W
    Measured parameters power, current, voltage, energy consumption
    Data history up to 100 days, export to CSV
    Protection automatic disconnection when a fault is detected (overload)
    Wireless Wi-Fi IEEE 802.11 b/g/n, 2.4 GHz
    Apps and integrations eWeLink, Amazon Alexa, Google Assistant, Home Assistant (via eWeLink add-on)
    Housing PC V0 (flame-retardant)
    Humidity 5–95 % RH
    Dimensions 162 × 122 × 45.5 mm

    Main functions

    • High load – up to 25 A / 5500 W without a separate contactor.
    • Energy metering – real-time power, current and voltage.
    • Consumption history – up to 100 days with CSV export.
    • Protective disconnection – power is cut when a fault is detected.
    • Schedules and scenes – the appliance runs only when needed.
    • Voice control – Amazon Alexa and Google Assistant.

    Where is it used?

    • Electric water heaters
    • Electric heaters and infrared panels
    • Sauna stoves up to 5.5 kW
    • Circuits of a single room or zone
    • Workshop equipment
    • Country houses and rental properties

    Use by need

    For homeowners.
    See how much a water heater or heater uses and control it by phone or schedule.
    For electricians.
    Up to 25 A directly – often no separate contactor is needed.
    For rental property managers.
    Monitoring of room or appliance consumption and remote disconnection.

    Practical use

    If a 3 kW water heater should heat only at the night tariff, install POWR3 in the water heater supply circuit, set a night schedule in the eWeLink app and monitor consumption in the history.

    Pros

    • 25 A / 5500 W load
    • Power, current and voltage metering
    • History up to 100 days with CSV export
    • Protective disconnection
    • Home Assistant integration

    Cons / limitations

    • Not MID certified – not suitable for billing
    • 2.4 GHz Wi-Fi only
    • Not DIN rail mounted
    • Remote control requires internet

    Safety and installation notes

    • Before installation switch off the power and verify that no voltage is present
    • Installation must be carried out by a qualified electrician
    • Select the cable cross-section for 25 A
    • Protect the circuit with a suitable circuit breaker and, where required, a residual current device
    • Install in a dry room and tighten the terminals

    Quick selection guide

    1 channel
    25 A / 5500 W
    Energy metering
    Wi-Fi 2.4 GHz
    CSV history
    eWeLink
    Suitable when you need:
    • to control a high-power appliance from the phone
    • to monitor the consumption of a water heater or heater
    • to disconnect the load automatically in case of a fault
    Check before use:
    • the load current (up to 25 A)
    • the cable cross-section and protection
    • the mounting location (not a DIN rail)
    • the Wi-Fi signal at the installation point
    Important reminder: POWR3 is neither a protective device nor a billing meter – it does not replace a circuit breaker, a residual current device or a MID certified meter.

    FAQ

    What load can be connected?
    Up to 25 A / 5500 W.
    What does POWR3 measure?
    Power, current, voltage and energy consumption.
    How long is the history stored?
    Up to 100 days, with export to CSV.
    Is it suitable for electricity billing?
    No, the device is not MID certified.
    Can it be mounted on a DIN rail?
    No, POWR3 is surface mounted; for DIN mounting choose POWR316 or POWR320D.
    Is it compatible with Home Assistant?
    Yes, via the eWeLink add-on.

    Smart switch with energy metering | 1-channel | 25A | 5500W | 100-240V | Wi-Fi | SONOFF | POWR3

    SONOFF POWR3 is a 25 A / 5500 W Wi-Fi switch with energy metering: power, current, voltage, 100-day history, protective disconnection and control with the eWeLink app.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Smart | Outdoor video surveillance IP camera 2MP | 1080p | IP65 | Wi-Fi 2.4 GHz | RJ45 | R9044 Woox
    Code: R9044

    The Woox R9044 is a wired outdoor 1080p IP camera with an IP65 housing, 104° view and IR up to 10 m. It connects via Wi-Fi 2.4 GHz or an RJ45 cable, records to microSD up to 128 GB and is controlled in the WOOX Home app.

    Price 67.00 € VAT incl.
    ( 55.37 € VAT excl. )
    Smart | remote water valve controller | 12V | 1.6 MPa | Wi-Fi | Tuya | NOUS-L3 | 5907772033951
    Code: NOUS-L3

    NOUS L3 smart remote water valve controller is a practical solution that allows you to open or close a water valve remotely via a smartphone. The device operates via a 2.4 GHz Wi-Fi connection, is controlled through the Nous Smart Home app, and is compatible with Amazon Alexa and Google Assistant voice assistants.

    This controller is especially useful where it is necessary to automate water supply, reduce the risk of water leakage, or conveniently control water supply according to a schedule. It can be used for controlling a building’s water inlet, irrigation systems, filling water tanks, swimming pools, or drinking troughs. 

    Price 37.89 € VAT incl.
    ( 31.31 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information