Products catalog

  • Smart | wireless motion sensor | detector | 100° | 8m | 433MHz | 42x38x33mm | white | Wi-Fi | SONOFF | PIR3-RF

    Code: PIR3-RF
    Barcode: 6920075775372

    SONOFF PIR3-RF is a wireless PIR motion sensor with RF 433 MHz: it detects motion up to 8 m away within 100°. It works with SONOFF RF Bridge R2 (eWeLink app) and RF receivers, runs on a CR2450 battery and mounts without wiring.

  • Smart | wireless motion sensor | detector | 100° | 8m | 433MHz | 42x38x33mm | white | Wi-Fi | SONOFF | PIR3-RF

    SONOFF PIR3-RF is a wireless passive infrared (PIR) motion sensor working on 433 MHz radio. It detects motion up to 8 m away within a 100° angle and sends a signal to SONOFF RF Bridge R2 or RF receivers.

    Key idea:
    A simple and affordable way to automate lighting or get motion notifications without wiring. In the app, the sensor is visible through RF Bridge R2, and without a hub it can directly control an RF receiver.
    Detection
    up to 8 m, 100°
    Connectivity
    RF 433 MHz
    Power
    CR2450, 3 V
    Dimensions
    38 × 33 × 42 mm

    How it works

    The PIR sensor detects a change in thermal radiation when a person moves in the detection zone and sends a 433 MHz radio signal.

    The signal is received by SONOFF RF Bridge R2, which passes the event to the eWeLink app – from there scenes, notifications and other SONOFF devices are linked.

    The sensor is powered by a CR2450 battery and mounted with 3M adhesive tape or on a separate Motion Sensor-BASE stand.

    Why choose PIR3-RF?
    Wireless installation in minutes, long battery life and a wide 100° detection angle make it quick to automate lighting in corridors, stairwells or storage rooms and to get motion notifications.

    Technical specifications

    Product type Wireless PIR motion sensor, RF 433 MHz
    Manufacturer / model SONOFF PIR3-RF
    Sensor type passive infrared (PIR)
    Detection distance up to 8 m (indoors)
    Detection angle 100°
    Wireless RF 433 MHz
    Compatibility SONOFF RF Bridge R2, SONOFF RF receivers
    Power 3 V CR2450 battery
    App eWeLink (via RF Bridge R2)
    Operating temperature -10 °C … +40 °C
    Operating humidity 5–95 % RH, non-condensing
    Housing PC V0, white
    Dimensions / weight 38 × 33 × 42 mm / 15 g
    Mounting 3M adhesive tape or Motion Sensor-BASE stand (not included)

    Main functions

    • Motion detection – up to 8 m and within 100°.
    • Notifications – via RF Bridge R2 to the eWeLink app.
    • Scenes – motion switches on lighting or other SONOFF devices.
    • Direct RF control – can control an RF receiver without a hub.
    • Wireless mounting – no wires, on adhesive tape or a stand.
    • Long battery life – CR2450 battery.

    Where is it used?

    • Corridors and stairwells
    • Storage rooms and basements
    • Garages and outbuildings
    • Entrances and hallways
    • Office break areas
    • Security motion notifications

    Use by need

    For homeowners.
    The light switches on as you pass, and motion notifications can be sent to the phone.
    For electricians.
    No wiring – the sensor is stuck on in minutes and paired with RF Bridge.
    For smart home integrators.
    An affordable RF sensor for scenes with RF receivers and Wi-Fi devices via RF Bridge R2.

    Practical use

    If the basement light is often left on, PIR3-RF is stuck to the wall, paired with RF Bridge R2, and an eWeLink scene is set: motion switches on the MINIR4 relay, and after 3 minutes without motion the light switches off.

    Pros

    • Fully wireless installation
    • Wide 100° detection angle
    • Detection distance up to 8 m
    • Small and light housing
    • Works with RF Bridge R2 and RF receivers

    Cons / limitations

    • RF Bridge R2 required for the app
    • One-way RF link – no status feedback
    • Indoor use only
    • Does not work with Zigbee hubs

    Safety and installation notes

    • Install only indoors in a dry place
    • Do not point the sensor at heaters, windows or direct sunlight
    • Observe polarity when replacing the battery
    • Recycle used batteries
    • Keep away from children – contains small parts and a battery

    Quick selection guide

    PIR sensor
    8 m, 100°
    RF 433 MHz
    CR2450 battery
    RF Bridge R2
    Indoor only
    Suitable when you need:
    • automate lighting by motion
    • get motion notifications
    • control an RF receiver without a hub
    Check before use:
    • whether you have RF Bridge R2 or an RF receiver
    • the mounting height and direction
    • the distance to the RF Bridge
    • that there are no heat sources in the detection zone
    Important reminder: PIR3-RF is not a certified intrusion alarm detector – use a certified system for professional security.

    FAQ

    Is a hub needed?
    RF Bridge R2 is needed for the app and scenes; the sensor can also control an RF receiver directly.
    Does it work with a Zigbee hub?
    No, PIR3-RF uses 433 MHz RF; for a Zigbee system choose SNZB-03.
    What battery does it use?
    A 3 V CR2450 battery.
    Can it be used outdoors?
    No, the sensor is designed for indoor use.
    What is the detection range?
    Up to 8 m indoors, within 100°.
    How is it mounted?
    With 3M adhesive tape or on a Motion Sensor-BASE stand.

    Smart | wireless motion sensor | detector | 100° | 8m | 433MHz | 42x38x33mm | white | Wi-Fi | SONOFF | PIR3-RF

    SONOFF PIR3-RF is a wireless 433 MHz PIR motion sensor: up to 8 m and 100°, CR2450 battery, works with RF Bridge R2 and RF receivers, for lighting automation and notifications.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Modular | smart | digital energy meter | 16A | 100-240V | DIN | Wi-Fi | SONOFF | POW Elite | POWR316D
    Code: SONOFF-POWR316D

    SONOFF POWR316D (POW Elite 16A) is a smart Wi-Fi relay with energy metering and an LCD display, mounted on a DIN rail. It switches loads up to 16 A (3680 W), shows power, voltage, current and kWh, and supports overload limits, schedules, eWeLink, Alexa and Google Assistant.

    Price 23.40 € VAT incl.
    ( 19.34 € VAT excl. )
    Smart | remote water valve controller | 12V | 1.6 MPa | Wi-Fi | Tuya | NOUS-L3 | 5907772033951
    Code: NOUS-L3

    NOUS L3 smart remote water valve controller is a practical solution that allows you to open or close a water valve remotely via a smartphone. The device operates via a 2.4 GHz Wi-Fi connection, is controlled through the Nous Smart Home app, and is compatible with Amazon Alexa and Google Assistant voice assistants.

    This controller is especially useful where it is necessary to automate water supply, reduce the risk of water leakage, or conveniently control water supply according to a schedule. It can be used for controlling a building’s water inlet, irrigation systems, filling water tanks, swimming pools, or drinking troughs. 

    Price 37.89 € VAT incl.
    ( 31.31 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information