Products catalog

Home/Product Catalog/Automation and Control Systems/Automation and Electrical Control Components | Contactors | Relays | SSR | Accessories/Industrial solid state relays | electrical load control
  • New item   Solid-state relay DIN | input 24 V DC | output 3–30 V DC, 3 A | 6.2 mm | Phoenix Contact DEK-OV- 24DC/24DC/3/AKT (2964296)

    Solid-state relay DIN | input 24 V DC | output 3–30 V DC, 3 A | 6.2 mm | Phoenix Contact DEK-OV- 24DC/24DC/3/AKT (2964296)

    Code: 2964296
    Inquire about this item
    Price 47.00 € VAT incl.
    ( 38.84 € VAT excl. )

    Phoenix Contact DEK-OV- 24DC/24DC/3/AKT (2964296) – 6.2 mm solid-state relay for DIN rail: 24 V DC control, 3–30 V DC output up to 3 A. Wear-free switching, suitable for frequent switching.

  • Product description

    Solid-state relay DIN | input 24 V DC | output 3–30 V DC, 3 A | 6.2 mm | Phoenix Contact DEK-OV- 24DC/24DC/3/AKT (2964296)

    Phoenix Contact DEK-OV- 24DC/24DC/3/AKT (2964296) is a solid-state relay in terminal block format. A 24 V DC control signal switches a 3–30 V DC load up to 3 A without mechanical contacts.

    Key point:
    When a load has to be switched frequently (up to 300 Hz) without contact wear, an electromechanical relay is no longer suitable. A solid-state relay switches fast and silently, and its 6.2 mm width saves panel space.
    Control voltage
    24 V DC
    Output
    1 NO, 3 A
    Output voltage
    3–30 V DC
    Width
    6.2 mm

    Operating principle

    The module snaps onto a 35 mm DIN rail; wires connect to the screw terminals.

    The 24 V DC control signal switches on the semiconductor output through a galvanically isolated input circuit – the yellow LED lights up.

    The output switches only DC loads of 3–30 V DC up to 3 A; it does not switch AC circuits.

    Why choose Phoenix Contact DEK-OV- 24DC/24DC/3/AKT (2964296)?
    Phoenix Contact DEK-OV- 24DC/24DC/3/AKT – a 6.2 mm solid-state relay with 24 V DC control and 3–30 V DC / 3 A output, switching up to 300 Hz.

    Technical specifications

    Product type Solid-state relay (SSR) module for DIN rail
    Manufacturer / code Phoenix Contact 2964296
    Series DEK-OV- 24DC/24DC/3/AKT
    Control voltage 24 V DC (19.2–28.8 V DC)
    Current consumption typ. 7 mA
    Output 1 NO (semiconductor, floating)
    Output voltage 3–30 V DC
    Rated current 3 A
    Voltage drop ≤0.2 V
    Operate / release time 40 µs / 200 µs
    Max. switching frequency 300 Hz
    Insulation coil–contacts 2.5 kV AC
    Operating temperature −20…+60 °C
    Dimensions 6.2 × 80 × 56 mm
    Weight 21 g
    Mounting 35 mm DIN rail; screw M3, 0.2–2.5 mm²
    Indication yellow LED
    Standards / approvals IEC 60947-5-1

    Main functions

    • Wear-free – no mechanical contacts.
    • Fast switching – up to 300 Hz.
    • Galvanic isolation – 2.5 kV between input and output.
    • LED indication – control status visible.
    • 6.2 mm width – many channels in a narrow panel.

    Where is it used?

    • Amplification of PLC digital outputs
    • 24 V DC solenoid valve control
    • Control of signal lamps and indicators
    • Frequent switching in cycled processes
    • Control of small DC actuators and coils
    • Packaging and conveyor automation

    Use by need

    Automation integrator.
    Fast, wear-free amplification of PLC outputs for DC loads.
    Panel builder.
    6.2 mm module – more channels on the same rail.
    Maintenance technician.
    No contacts to wear or arc.

    Practical application

    If a PLC output has to control a 24 V DC valve many times per second, a DEK-OV module is used instead of an electromechanical relay: it switches without contact wear and the LED shows the control status.

    Pros

    • Wear-free switching
    • Up to 300 Hz
    • Low voltage drop ≤0.2 V
    • Yellow LED
    • Only 6.2 mm wide

    Cons / limitations

    • Switches DC loads 3–30 V only; does not switch AC
    • Maximum current 3 A
    • No visible open contact – disconnect the supply before working on the circuit

    Safety and installation notes

    • Install only with the supply disconnected.
    • Check polarity: input and output are DC.
    • Use a freewheeling diode for inductive DC loads.
    • Do not exceed 3 A and 30 V DC.

    Quick selection guide

    24 V DC → 3–30 V DC
    3 A
    6.2 mm
    wear-free
    Suitable when you need:
    • to switch a DC load frequently
    • to amplify a PLC output up to 3 A
    • to save panel space
    Check before use:
    • that the load is DC 3–30 V
    • that the current does not exceed 3 A
    • that the control signal is 24 V DC
    Important reminder: DEK-OV does not switch AC circuits – for 230 V AC loads choose an AC solid-state relay or an electromechanical relay.

    FAQ

    Can it switch 230 V AC?
    No, the output is for 3–30 V DC only.
    What is the maximum current?
    3 A.
    What is the control voltage?
    24 V DC (19.2–28.8 V DC).
    Is there an LED?
    Yes, a yellow LED shows the status.
    How is it mounted?
    On a 35 mm DIN rail, screw terminals.
    Do you help with selection?
    Yes, tell us the load and control signal – we will select a suitable relay.

    Solid-state relay DIN | input 24 V DC | output 3–30 V DC, 3 A | 6.2 mm | Phoenix Contact DEK-OV- 24DC/24DC/3/AKT (2964296)

    Phoenix Contact DEK-OV- 24DC/24DC/3/AKT (2964296) – 6.2 mm solid-state relay for DIN rail with 24 V DC control and 3–30 V DC / 3 A output for fast, wear-free switching of DC loads.

    Published: 2026-11-05 · Data verified against the manufacturer datasheet: 2026-11-05

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Alternative products

    Interface relay | 4CO | 7 A | coil 24 V AC | plug-in | Finder 55.34.8.024.0040 New item  
    Interface relay | 4CO | 7 A | coil 24 V AC | plug-in | Finder 55.34.8.024.0040
    Code: 55.34.8.024.0040

    Finder 55.34.8.024.0040 – interface relay with 4CO contacts (7 A) and 24 V AC coil. For control signal isolation, contact multiplication and control of contactor and valve coils in automation panels.

    Price 4.33 € VAT incl.
    ( 3.58 € VAT excl. )
    Add to cart 
    Interface relay | 2CO | 5 A | coil 24 V DC | plug-in | OMRON MY2N 24 V DC Interface relay | 2CO | 5 A | coil 24 V DC | plug-in | OMRON MY2N 24 V DC New item  
    Interface relay | 2CO | 5 A | coil 24 V DC | plug-in | OMRON MY2N 24 V DC
    Code: MY2N 24VDC

    OMRON MY2N 24 V DC – interface relay with 2CO contacts (5 A) and 24 V DC coil. For control signal isolation, contact multiplication and control of contactor and valve coils in automation panels.

    Price 6.05 € VAT incl.
    ( 5.00 € VAT excl. )
    Add to cart 

  • Subscribtion to new arrivals

    privacy policy

    Information