Stainless steel push-in holder for 10 mm wire | Niro-Clip | for roof and façade

Technical specifications

Product type: push-in wire holder
Model: Niro-Clip
Material: V2A stainless steel
Diameter of wire to be fixed: 10 mm
Installation location: roof, façade
Installation method: push-in / mechanical fixing
Recommended installation distance: every 1 metre
Additional accessories: cover for aesthetics and fixation
Sealing accessories: gaskets 1047, 1048
Usage conditions: for outdoor and indoor work
Resistance: moisture, corrosion, atmospheric effects

Functions

Reliably fixes 10 mm wire on a roof or façade.
Ensures neat and stable wire positioning.
Suitable for outdoor use where corrosion resistance is important.
Helps maintain an aesthetic installation appearance when using an additional cover.
When using gaskets 1047 or 1048, it helps ensure better sealing at the installation point.
Recommended installation every 1 m helps maintain even and safe wire fixing.

Use

For household users: Suitable when a 10 mm wire needs to be neatly fixed on a building façade or roof while maintaining an aesthetic appearance.

For electricians: Used for professional wire fixing during installation work on roof structures, façades or technical surfaces.

For engineers / designers: A relevant solution when designing systems that require a resistant stainless steel holder for 10 mm wire and reliable fixing in outdoor conditions.

For construction and maintenance specialists: Useful for installing systems on external building surfaces when durability, resistance to environmental effects and a neat result are important.

Advantages

Made of V2A stainless steel
Suitable for 10 mm wire
Can be installed on a roof or façade
Resistant to corrosion and atmospheric effects
Neat, professional installation appearance
Can be used with a cover for additional fixation
Gaskets 1047 or 1048 can be used for sealing
Clear installation recommendation – every 1 metre

Disadvantages

Cover and gaskets may be supplied separately
Requires a suitable mounting base
Additional gaskets are recommended to ensure sealing
Not suitable for wires of other diameters unless specified otherwise by the manufacturer

FAQ

What wire is this holder intended for?
The holder is intended for fixing 10 mm wire.

Where can this holder be installed?
It is intended for installation on a roof or façade.

At what distance is it recommended to install the holders?
It is recommended to install the holders approximately every 1 metre.

Are additional accessories required?
For additional aesthetic appearance and fixation, it is recommended to use a cover, and for sealing – gaskets 1047 or 1048.