Products catalog

  • Supply air ventilation damper head | vent | with filter | D125 | PS plastic | white | 12.5TG

    Code: 12936

    12.5TG – white PS supply ventilation damper head D125 with built-in air filter and adjustable non-return valve. Mounted from the room side into a wall or ceiling supply damper.

  • Supply air ventilation damper head | vent | with filter | D125 | PS plastic | white | 12.5TG

    12.5TG is a D125 supply air ventilation damper (vent) head mounted from the room side. It has a built-in air filter and an adjustable non-return valve, so cleaner air is supplied to the room and its amount can be controlled.

    Key point:
    The supply head is the visible part of the ventilation opening in the room. The filter stops dust and fine particles, while the adjustable valve lets you choose the flow and reduces back-flow of air. The white polystyrene head blends with wall and ceiling finishes.
    Outer diameter
    Ø125 mm
    Filter
    built-in
    Valve
    adjustable non-return
    Material
    PS, white

    How it works

    The head is mounted from the room side into the supply ventilation damper system – in a wall or ceiling. Outer diameter is Ø125 mm.

    Air from the duct passes through the built-in filter, which stops dust and fine particles, and enters the room through the adjustable non-return valve. The valve sets the flow to suit the room.

    The result is a controlled, cleaner fresh-air supply with fewer draughts and odours from the duct.

    Why choose 12.5TG?
    One part does three jobs: it finishes the ventilation opening in the room, filters the supply air and lets you adjust the flow. No special tools are needed.

    Technical specifications

    Product type Supply air ventilation damper head (vent) with filter
    Product code 12936
    Model 12.5TG
    Outer diameter Ø125 mm
    Material PS (polystyrene)
    Colour white
    Filtration built-in air filter (dust, fine particles)
    Valve adjustable non-return valve for air flow control
    Installation from the room side, into a wall or ceiling supply ventilation damper
    Place of use indoors

    Main functions

    • Built-in filter – less dust and fine particles in the supply air.
    • Adjustable valve – the flow can be matched to the needs of the room.
    • Non-return function – reduces back-flow of air, draughts and odours.
    • Room-side mounting – quick installation and maintenance without outdoor work.
    • Ø125 mm – fits wall and ceiling supply dampers.
    • White PS head – light, rigid and blends with the interior.

    Where is it used?

    • Flats and detached houses
    • Bedrooms and living rooms
    • Offices and administrative premises
    • Commercial premises
    • Supply ventilation systems needing a filter and flow adjustment
    • Upgrading older ventilation lines

    Use by need

    For the homeowner.
    Cleaner supply air and the option to reduce the flow when it is windy or cold.
    For the installer.
    Mounted from the room side into a Ø125 mm damper, no special tools needed.
    For the building manager.
    A simple way to renew supply openings and reduce dust ingress.

    Practical use

    If a room already has a Ø125 mm supply opening but dust gets in and a draught is felt, finishing it with the 12.5TG head sends the air through a filter, and the adjustable valve lets you reduce the flow in the cold season.

    Pros

    • Built-in air filter
    • Adjustable air flow
    • Non-return valve reduces draughts and odours
    • Room-side mounting
    • Light and rigid PS head

    Cons / limitations

    • PS plastic is not UV-resistant – not for outdoor use
    • The supplier does not state air flow (m³/h) or pressure loss data
    • The filter must be cleaned or replaced periodically
    • This is a head – the supply damper system or duct must be installed separately

    Safety and installation notes

    • Before installation check that the damper or duct diameter is Ø125 mm.
    • Install indoors only – the PS head is not designed for outdoor conditions.
    • Do not cover the head with furniture or curtains – the air flow drops.
    • Inspect the filter regularly and clean or replace it.
    • Do not force the valve adjustment – turn or slide it freely.

    Quick selection guide

    Ø125 mm
    Filter
    Adjustable valve
    PS
    White
    Room-side mounting
    Suitable when you need:
    • To finish a Ø125 mm supply opening in the room
    • To filter dust from the supply air
    • To adjust and reduce the air flow
    Check before use:
    • Whether the damper or duct diameter is Ø125 mm
    • Whether the head will be installed indoors
    • Whether there is access for filter maintenance
    Important reminder: The head is part of a supply opening – it does not blow air itself and does not replace a fan or heat recovery unit.

    FAQ

    What size opening does the head fit?
    The outer diameter is Ø125 mm.
    From which side is it mounted?
    From the room side, into a wall or ceiling supply damper.
    Does it have a filter?
    Yes, an air filter is built into the head.
    Can the flow be adjusted?
    Yes, with the adjustable non-return valve.
    Can it be used outdoors?
    No, PS plastic is not UV-resistant.
    What is the air flow?
    The supplier does not state an m³/h value – flow depends on the system and valve position.

    Supply air ventilation damper head | vent | with filter | D125 | PS plastic | white | 12.5TG

    12.5TG is a white PS D125 supply ventilation damper head with a built-in filter and adjustable non-return valve, mounted from the room side in a wall or ceiling. Designed for cleaner, controlled air supply in homes, offices and commercial premises.

    Published: 2026-11-13 · Data verified against the supplier specification: 2026-11-13

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Window trickle vent | adjustable | with G3 filter | 350 mm | white | no-drill installation | 350LVB
    Code: 37611

    350LVB – adjustable supply window trickle vent with G3 (EU3) filter: 350 mm long, 17.9 mm wide, white. Mounted on the sash of a PVC or wooden window without drilling the frame, fully closable with a slider.

    Price 25.41 € VAT incl.
    ( 21.00 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information