Supply air ventilation damper in the wall | with filter | mineral wool thermal insulation | D125 | 0,65m | white | 12,5TOV065-02
Code: 23054Price 35.27 € VAT incl.( 29.15 € VAT excl. )Wall-mounted supply air vent D125 with a 650 mm cuttable duct, G3 filter and thermal and acoustic insulation (basalt mineral wool). Flow is adjusted with a handle smoothly down to full closure; one vent is intended for a room of approximately 20 m².
-
Supply air ventilation damper in the wall | with filter | mineral wool thermal insulation | D125 | 0,65m | white | 12,5TOV065-02
Wall-mounted supply air vent (damper) D125 for bringing fresh outdoor air into residential and office rooms through an external wall. Duct length – 650 mm, thermal and acoustic insulation – basalt mineral wool. Airflow is adjusted with a handle on the indoor head – smoothly, down to full closure.
Key idea:
Airtight homes with PVC windows often lack fresh air: windows fog up, moisture and CO₂ build up. This vent supplies outdoor air in a controlled way – through a G3 filter, an insulated duct and with adjustment down to full closure, without replacing windows or installing ductwork. One vent is rated for a room of approximately 20 m².Duct length
650 mm (can be cut)Insulation
mineral woolFilter
G3, washableRoom
up to ~20 m²Operating principle
A hole is drilled in the wall with a Ø132 mm core bit (resulting hole ~133 mm) with a 2–3° slope towards the outside so that condensate drains outdoors. The plastic duct is cut to the wall thickness and inserted, and an aluminium grille with a stainless steel mesh is fixed outside.
Outdoor air enters through the grille, passes the insulated duct and is distributed into the room through the G3 filter and the indoor head with damper. The insulation (mineral wool) reduces heat loss through the duct walls and dampens street noise.
You adjust the flow with the handle on the head (or with a cord if mounted high), and a scale shows the opening degree. The vent works naturally – air flows due to the pressure difference, so it performs best when exhaust ventilation is running in the home (bathroom, kitchen).
What does the 12,5TOV065-02 vent give you?
You get controlled fresh air supply to a specific room without open windows or complex ductwork – with a filter against dust and insects, an insulated duct and the option to close it fully in cold weather.Technical specifications
Product type Supply air ventilation damper (wall vent) Product code 12,5TOV065-02 Nominal diameter D125 Duct outer diameter 132 mm Wall opening Ø132 mm core bit (hole ~133 mm), 2–3° slope outwards Duct length 650 mm (cut to wall thickness) Series lengths 400–1000 mm in 50 mm steps Thermal and acoustic insulation basalt mineral wool Filter G3 class, in the head, washable with water Flow adjustment Handle on the head or cord, with scale; smooth down to full closure Outdoor part Aluminium grille with stainless steel mesh Throughput, fully open 61.0 m³/h at 1.5 m/s · 81.4 m³/h at 2 m/s · 122.1 m³/h at 3 m/s air velocity in the duct Recommended room area up to ~20 m² per vent Colour (indoor head) White Scope of delivery Indoor head with filter and damper, insulating element, plastic duct, outdoor grille Main functions
- Adjustment down to full closure – adapt the flow to the weather and season, close the vent on cold days.
- G3 filter in the head – captures dust, fluff and insects; removable and washable with water.
- Insulated duct – the insulation (mineral wool) reduces heat loss and cooling of the duct walls.
- Noise reduction – the insulation reduces street noise travelling through the duct.
- Scale and cord – see the opening degree and operate a high-mounted vent with a cord.
- Duct cut on site – fits walls of various thicknesses up to 650 mm – cut to the actual thickness.
- Outdoor grille with mesh – aluminium grille with stainless steel mesh protects the duct from birds and coarse debris.
Where is it used?
- Bedrooms and children’s rooms lacking fresh air at night
- Apartments with airtight PVC windows
- Apartment blocks under renovation when windows are replaced
- Private houses with natural or mechanical exhaust
- Offices, studies, meeting rooms
- Country houses and seasonal homes
- Living rooms where windows fog up and moisture accumulates
Use by need
For the apartment owner.
Solves stuffiness and window fogging in the bedroom without replacing windows or installing a heat recovery unit.For the renovation contractor.
One D125 model fits walls of different thicknesses – the duct is cut on site, drilled with a standard Ø132 mm core bit.For the ventilation designer.
A supply air element for living rooms where exhaust is arranged in the bathroom and kitchen.Practical use
If bedroom windows (~14 m², PVC windows) fog up in the morning and the external wall is no thicker than 650 mm, one 12,5TOV065-02 vent is enough: the duct is cut to the wall thickness, the vent is mounted 20–30 cm from the window edge at a height of 2–2.5 m and left slightly open at night. Exhaust must run in the bathroom and kitchen – then air moves from the bedroom towards the wet rooms.Pros
- Smooth adjustment down to full closure
- G3 filter, washable with water
- Basalt mineral wool thermal and acoustic insulation
- Duct cut to wall thickness
- Aluminium outdoor grille with stainless steel mesh
- Operated by handle or cord, with scale
- No electricity or ductwork needed
Cons / limitations
- Works naturally – flow depends on exhaust and weather, there is no fan
- No heat recovery – outdoor-temperature air is supplied in winter
- G3 is a coarse filter, not intended for fine particles (PM2.5)
- In bathrooms, kitchens, vestibules and corridors a supply vent is not enough – exhaust is required there
- Duct 650 mm – for a thicker wall choose a longer model of the series
Safety and installation notes
- Before drilling, check the wall for electrical cables, pipes and reinforcement.
- Drill with a 2–3° slope outwards – otherwise condensate will run into the room.
- Do not install close to the window reveal or at the junction of two external walls – the wall is coldest there, freezing and condensation may occur.
- Fix the outdoor grille with louvres horizontal and sloping down, ideally under a canopy, window sill or eave – so water does not enter the duct.
- Slide the insulation towards the head so that it does not obstruct the damper opening and closing.
- Fix the inner part of the head with 4 dowels and screws with the arrow above a mounting hole pointing vertically down; the cord must not wind onto the adjustment mechanism.
- In apartment blocks, agree façade drilling with the building administrator or owners’ association.
Quick selection guide
D125Duct 650 mmmineral woolG3 filterUp to ~20 m²Suitable when you need:- Fresh air in a bedroom, children’s room or study
- A solution for fogging windows in an airtight apartment
- A simple supply element without electricity
Check before use:- Wall thickness – the duct (650 mm) must not be shorter than the wall
- Whether exhaust ventilation runs in the home (bathroom, kitchen)
- Space 20–30 cm from the window at 2–2.5 m height
- Whether façade drilling is allowed (approval in apartment blocks)
Important reminder: A supply vent does not replace exhaust ventilation or a heat recovery unit – it only supplies air and does not recover heat.FAQ
What wall thickness does 12,5TOV065-02 fit?
Walls up to 650 mm – the duct is cut to the actual wall thickness.What hole diameter is needed?
A Ø132 mm core bit – giving a hole of about 133 mm, drilled with a 2–3° slope outwards.Can the vent be closed completely?
Yes, the handle on the head adjusts the flow smoothly down to full closure.How often should the filter be cleaned?
Washing the filter every 3 months, vacuuming the duct every 6 months and cleaning the grille once a year is recommended.What room size does one vent cover?
The vent is rated for a living room of approximately 20 m².Is it suitable for bathroom or kitchen ventilation?
No – exhaust ventilation is installed there, while the supply vent is fitted in living rooms.Supply air ventilation damper in the wall | with filter | mineral wool thermal insulation | D125 | 0,65m | white | 12,5TOV065-02
12,5TOV065-02 – wall-mounted supply air vent D125 with a 650 mm duct, G3 filter and thermal and acoustic insulation (mineral wool). Adjustable down to full closure, intended for a living or office room of up to ~20 m² with working exhaust.
Published: 2026-11-04 · Data verified against the manufacturer datasheet: 2026-11-04
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.ManufacturerThis product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Window trickle vent | adjustable | with G3 filter | 350 mm | white | no-drill installation | 350LVBCode: 37611350LVB – adjustable supply window trickle vent with G3 (EU3) filter: 350 mm long, 17.9 mm wide, white. Mounted on the sash of a PVC or wooden window without drilling the frame, fully closable with a slider.
Price 25.41 € VAT incl.( 21.00 € VAT excl. )

















