Supply air ventilation damper in the wall | with filter | mineral wool thermal insulation with foil | D125 | 0,45m | white | 12,5TOV045-01
Code: 23041Price 31.45 € VAT incl.( 25.99 € VAT excl. )Wall supply air valve Ø125 mm / 450 mm with filter, non-return valve and foil-faced mineral wool insulation. Restores fresh air supply in apartments, houses and offices, dampens street noise, while the foil protects the wool from moisture and dust.
-
Supply air ventilation valve | wall air inlet | with filter | foil-faced mineral wool thermal insulation | D125 | 0,45m | white | 12,5TOV045-01
Wall supply air valve for bringing outdoor air into a room through an external wall. The kit consists of a Ø125 mm pipe, 450 mm long, sheathed in foil-faced mineral wool thermal insulation, and an internal head with a filter and a non-return valve. It is a natural ventilation component for apartments, houses and offices that need a constant supply of fresh air.
Key point:
Airtight windows and insulated walls stop natural air infiltration, so extract ventilation in the bathroom or kitchen draws poorly, and moisture and CO₂ build up. This valve creates a controlled air inlet point. Mineral wool insulation provides good thermal and acoustic insulation, while the foil facing protects the wool from moisture and dust and keeps fibres out of the airflow.Diameter
Ø125 mm (internal)Pipe length
450 mmInsulation
Foil-faced mineral woolKit contents
Filter + non-return valveHow it works
The valve is installed in a hole drilled through the external wall: the insulated pipe runs through the full wall thickness, the head with the filter is fitted on the inside, and a protective grille covers the opening on the outside.
When extract ventilation is running in the building (natural, via ducts, or mechanical), a slight negative pressure is created and outdoor air flows in through the valve. The filter traps dust, pollen and insects, while the non-return valve limits backflow and the effect of strong wind gusts.
The mineral wool layer separates the cold pipe surface from the wall material and dampens noise coming from outside, while the foil facing protects the wool from moisture and dust.
Why choose 12,5TOV045-01?
Compared with 12,5TOV045-02, the foil facing protects the wool from moisture and dust and keeps fibres out of the airflow, while mineral wool dampens street noise better than the PE foam of 12,5TOV045-03. It is a good compromise between -02 and -03; for damp walls choose 12,5TOV045-03.Technical specifications
Product type Wall supply air valve (air inlet) Manufacturer / code Elsp Group / 12,5TOV045-01 Airflow direction Supply (from outside into the room) Installation Through an external wall Pipe internal diameter Ø125 mm Pipe length 450 mm Thermal insulation Foil-faced mineral wool Internal head With air filter and non-return valve Material Plastic Colour White Spare head 12,5TG (D125, with filter) Comparison table: D125 / 0,45 m family
12,5TOV045-01 Foil-faced mineral wool 12,5TOV045-02 Mineral wool 12,5TOV045-03 Polyethylene foam – does not absorb moisture, fibre-free Key features
- Constant air supply – extract ventilation works more effectively, with no need to keep a window ajar.
- Air filter – traps dust, pollen and insects before the air enters the room.
- Non-return valve – limits backflow and the effect of wind gusts.
- Mineral wool insulation – reduces the thermal bridge and dampens noise coming from outside.
- Foil facing – protects the wool from moisture and dust and keeps fibres out of the airflow.
- Easy maintenance – the head is removable and the filter can be cleaned; if necessary, the head can be replaced with 12,5TG.
Where is it used?
- Living rooms and bedrooms in apartments after window replacement
- Renovated apartment blocks with natural extract ventilation
- Detached houses without heat recovery
- Rooms with a solid fuel boiler or fireplace – to supply combustion air
- Offices and small commercial premises
- Country houses and holiday homes, in masonry and timber walls
- Rooms facing noisy streets where sound damping matters
Use by need
For apartment owners.
Solves the problem of fogged windows and stuffy air without investing in a heat recovery unit.For renovation contractors.
A standard Ø125 mm component to ensure air supply after window replacement and facade insulation.For boiler room installers.
A simple way to provide a constant air supply to a fuel combustion room.Practical application
If, after PVC windows have been installed, the glass in an apartment fogs up and the bathroom ventilation duct barely draws, a 12,5TOV045-01 valve fitted through the external wall in the bedroom or living room restores the air supply, while the foil-faced mineral wool insulation reduces heat loss in the opening and dampens street noise.Pros
- Complete kit: insulated pipe + head with filter
- Foil-faced mineral wool – good thermal and acoustic insulation
- Non-return valve limits wind gusts
- Standard Ø125 mm diameter
- No electricity needed – works passively
- Replaceable 12,5TG head
Cons / limitations
- Pipe length 450 mm – thicker walls require a longer model (e.g. D160 / 1 m)
- Air is not heated – in the cold season it is worth placing the valve above a radiator
- Works only together with functioning extract ventilation
- A clogged filter reduces the air supply – periodic cleaning is required
- The foil protects the wool, but for very damp walls 12,5TOV045-03 is a better choice
Safety and installation notes
- Before drilling, check that there are no electrical cables, pipes or reinforcement in the wall.
- Select the core drilling diameter according to the outer diameter of the pipe with insulation (see the dimension drawing).
- Drill the opening with a slight downward slope towards the outside so that condensate and rainwater do not run inside.
- Seal the gap between the insulation and the wall to avoid a thermal bridge and air leakage.
- Wear gloves and safety glasses when cutting or shortening the pipe with mineral wool.
- In rooms with gas appliances or boilers, coordinate the air supply with the designer – the valve does not replace the regulatory combustion air supply calculation.
Quick selection guide
Ø125 mm450 mmMineral wool + foilFilter | non-return valveSuitable when you need:- to restore air supply after window replacement;
- good thermal and acoustic insulation;
- a simple, passive solution without electricity.
Check before use:- wall thickness (pipe 450 mm);
- whether extract ventilation is working;
- whether there is an external grille to cover the opening.
Important reminder: the valve does not replace a mechanical ventilation system with heat recovery and does not heat the supply air.FAQ
How does -01 differ from -02 and -03?
-01 is insulated with foil-faced mineral wool, -02 with mineral wool without foil, and -03 with polyethylene foam, which does not absorb moisture.Does the valve need electricity?
No, it works passively thanks to the pressure difference created by extract ventilation.What wall thickness is it suitable for?
The pipe length is 450 mm, so choose a longer model for thicker walls.Where is the best place to install it?
In a living room, in the upper part of the wall or above a radiator, so that the incoming air warms up.How do I maintain the filter?
Remove the internal head and clean the filter; when worn, replace the head with 12,5TG.What else is worth buying for installation?
A D125 external protective grille and sealing products for the opening – they protect against rain, birds and air leakage.Wall supply air ventilation valve D125 | mineral wool insulation (foil-faced) | 12,5TOV045-01
Wall supply air valve Ø125 mm, 450 mm, with filter, non-return valve and foil-faced mineral wool insulation – a simple passive solution for fresh air supply and better noise damping in apartments, houses and offices after window replacement or renovation.
Published: 2026-11-04 · Data verified against supplier specification: 2026-11-04
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.ManufacturerThis product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Window trickle vent | adjustable | with G3 filter | 350 mm | white | no-drill installation | 350LVBCode: 37611350LVB – adjustable supply window trickle vent with G3 (EU3) filter: 350 mm long, 17.9 mm wide, white. Mounted on the sash of a PVC or wooden window without drilling the frame, fully closable with a slider.
Price 25.41 € VAT incl.( 21.00 € VAT excl. )

















