
Tracer wire | copper | SL 1x1.5 mm² | orange
Code: SL 1x1,5Price 0.51 € VAT incl.( 0.42 € VAT excl. )Special purpose wire for locating routes of dielectric fibre optic or telecom cables. Laid in the ground together with the cable; service life at least 25 years. Annealed copper conductor, PE insulation, PVC sheath.
Price is per 1 m.
-
Tracer wire | copper | SL 1x1.5 mm² | orange
SL 1x1.5 mm² is a copper tracer wire laid in the ground together with a dielectric fibre optic or telecom cable or a plastic pipe. The route can later be located precisely with a cable locator.
Key idea:
A metal detector cannot find a fibre optic cable or plastic pipe underground. A laid tracer wire allows the route to be found before excavation and avoids damage.Cross-section
1 × 1.5 mm²Insulation
PE + PVC sheathOperating temp.
−30…+70 °CLife in soil
≥ 25 yearsTechnical specifications
Product type Tracer (route marking) wire Designation SL 1x1.5 Cores × cross-section 1 × 1.5 mm² Conductor Annealed copper, class 2 per EN 60228 Insulation Polyethylene (PE) Sheath TI-1 type PVC per EN 50363-4-1 Operating temperature −30…+70 °C; max. conductor +70 °C Short-circuit temperature +160 °C Installation temperature −5…+40 °C Test voltage 8 kV Insulation resistance ≥ 1000 MΩ·km (+15 °C) Minimum bending radius > 5 × wire diameter Service life in soil At least 25 years Colour orange Sales unit 1 m Where is it used?
- Fibre optic routes
- Telecom cable routes
- Plastic water and sewer pipes
- Plastic gas pipes
- Drainage and irrigation systems
Pros
- Route can be located with a locator many years later
- Long service life in soil
- PE insulation and PVC sheath
- Colour separation of routes
- Sold by the metre
Cons / limitations
- Not a power or signal transmission cable
- A cable locator is required to find the route
- Wire ends must be accessible to connect the locator transmitter
Safety and installation notes
- Lay the wire together with the cable or pipe, without breaks along the entire route.
- Bring the ends out into manholes or boxes so the locator can be connected.
- Install at temperatures not lower than −5 °C.
- Match the colour to the project or the route owner's requirements.
FAQ
What is a tracer wire for?
So that a plastic or fibre optic route underground can be found with a locator.Which colour should I choose?
According to the project or the route owner's requirements – often orange for telecom, blue for water.Do you sell it by the metre?
Yes, the price is per 1 m.How to choose the right cable – see the special purpose cable guide.
Tracer wire | copper | SL 1x1.5 mm² | orange
Copper tracer wire SL 1x1.5 mm² – for locating fibre optic, telecom and plastic pipe routes with a locator.
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.ManufacturerThis product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Cable sheath and wire stripper 0.2–4.0 mm² | ErgoStrip KNIPEXCode: 169501SBKNIPEX high-quality, ergonomically designed wire and cable stripping tool for fast, precise, and safe work. This stripping knife is highly favored by professional electricians for its versatility, durability, and practical design. Suitable for removing insulation from both signal and power wires, as well as for installation, data, and coaxial cables.
Perfectly suited for use on construction sites and in domestic installations, especially where wires need to be quickly and accurately prepared for connection in confined spaces.
Price 48.40 € VAT incl.( 40.00 € VAT excl. )









