Ultrasonic air humidifier | 14 kg/h | 800 W | mains water connection | 50–100 m² | manual control | ES-SC-06-5
Code: ES-SC-06-5Price 450.45 € VAT incl.( 372.27 € VAT excl. )Ultrasonic air humidifier, 14 kg/h, 800 W, recommended for 50–100 m² rooms. Direct mains water connection, 20 atomizing heads. Manual control.
-
Ultrasonic air humidifier | 14 kg/h | 800 W | mains water connection | 50–100 m² | manual control | ES-SC-06-5
Ultrasonic air humidifier with an output of 14 kg/h, designed for 50–100 m² rooms – warehouses, production halls, greenhouses, print shops and larger commercial spaces. Ultrasound turns water into a fine mist that evaporates quickly in the air. The manual model runs in the set mode.
Key point:
The direct mains water connection allows continuous operation without refilling – suitable for rooms where humidity is maintained around the clock. Correct humidity reduces material drying, static electricity and dust.Output
14 kg/hPower
800 WArea
50–100 m²Water
mains supplyOperating principle
An ultrasonic transducer vibrates the water at high frequency and breaks it into fine droplets, and a fan blows the mist into the room.
The manual model runs in the set mode – a separate hygrostat or humidity sensor is recommended for humidity control.
Water is supplied directly from the mains, and the mist is distributed through 20 atomizing heads.
Why choose ES-SC-06-5?
Industrial output of 14 kg/h in a compact housing: one unit covers a room of up to 100 m² and requires no ducts or complex installation.Technical specifications
Product type Ultrasonic air humidifier Code ES-SC-06-5 Humidification output 14 kg/h Power 800 W Supply voltage 220 V AC, 50 Hz Water supply direct mains water connection Atomizing heads 20 pcs Control manual Recommended area 50–100 m² Operating temperature +3 … +45 °C Dimensions 700 × 440 × 480 mm Weight 14 kg Main functions
- Ultrasonic mist – water evaporates in the air without wetting surfaces when the humidifier is correctly sized.
- Output 14 kg/h – sufficient for a 50–100 m² room.
- Manual control – simple and reliable, can be combined with an external hygrostat.
- Mains water connection – 20 heads, no tank refilling.
- Lower energy consumption – ultrasonic humidification does not heat water, so it uses less energy than steam humidification.
- Versatile use – suitable for industry, agriculture and commercial premises.
Where is it used?
- Warehouses (wood, paper, textiles)
- Print shops and packaging halls
- Greenhouses and nurseries
- Mushroom growing rooms
- Production halls where static electricity must be reduced
- Woodworking workshops
- Larger commercial and exhibition spaces
Use by need
For warehouse or production managers.
Stable humidity protects materials from drying out and reduces static discharges.For greenhouses or mushroom farms.
Maintained humidity improves growing conditions for plants and mycelium.For print shops or furniture production.
Paper and wood deform less, reducing rejects.Practical use
If the relative humidity in a 100 m² warehouse drops to 20–30 % in winter, a 14 kg/h humidifier combined with a hygrostat and helps reduce material drying and static electricity.Pros
- High output – 14 kg/h
- Fine mist that evaporates quickly
- Lower energy use than steam humidification
- Simple manual control
- Continuous operation from mains water
- Compact housing
Cons / limitations
- Demineralised or softened water is required – otherwise white mineral dust settles
- No automatic humidity control – a hygrostat is needed
- A mains water connection is required
- Ingress protection (IP) not specified – for indoor use
Safety and installation notes
- Connect to an earthed socket matching the 220 V AC, 50 Hz supply.
- Do not direct mist at electrical equipment, panels or luminaires.
- Disconnect from the mains before cleaning.
- Clean the water tank and nozzles regularly to prevent bacterial growth.
- Do not use in rooms where the temperature is below +3 °C.
- Do not keep relative humidity above 60–65 % for long periods – condensation may form.
Quick selection guide
14 kg/h800 W50–100 m²manual | mains waterSuitable when you need to:- maintain humidity in a 50–100 m² room;
- reduce static electricity and material drying;
- humidify continuously without refilling a tank.
Check before use:- room volume and air change rate;
- water hardness (softened water recommended);
- socket and supply voltage (220 V AC, 50 Hz).
Important reminder: a humidifier does not replace ventilation or reduce CO₂, and excessive humidity promotes condensation and mould.FAQ
What room size is it suitable for?
Recommended for 50–100 m² rooms, depending on the air change rate and target humidity.Can tap water be used?
Yes, but hard water leaves white mineral dust – softened or demineralised water is recommended.Does it maintain humidity automatically?
No, this is a manual model – a hygrostat is needed to maintain humidity.How is water supplied?
Directly from the mains water supply.What is the power?
800 W, supply 220 V AC, 50 Hz.Can it be used outdoors?
No, the humidifier is intended for indoor use.Ultrasonic air humidifier | 14 kg/h | 800 W | mains water connection | 50–100 m² | manual control | ES-SC-06-5
Ultrasonic air humidifier 14 kg/h, 800 W, for 50–100 m² rooms, with a mains water connection and manual control – for warehouses, production halls, greenhouses and print shops.
Published: 2026-11-12 · Data based on supplier specification: 2026-11-12
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review








