Products catalog

  • Ultrasonic air humidifier | 3 kg/h | 400 W | 15 L tank | 20–50 m² | manual control | ES-SC-06-1

    Code: ES-SC-06-1

    Ultrasonic air humidifier, 3 kg/h, 400 W, recommended for 20–50 m² rooms. 15 L water tank. Manual control.

  • Ultrasonic air humidifier | 3 kg/h | 400 W | 15 L tank | 20–50 m² | manual control | ES-SC-06-1

    Ultrasonic air humidifier with an output of 3 kg/h, designed for 20–50 m² rooms – warehouses, production halls, greenhouses, print shops and larger commercial spaces. Ultrasound turns water into a fine mist that evaporates quickly in the air. The manual model runs in the set mode.

    Key point:
    The 15 L tank allows the humidifier to be used without a mains water supply – suitable where humidification is needed seasonally or at changing locations. Correct humidity reduces material drying, static electricity and dust.
    Output
    3 kg/h
    Power
    400 W
    Area
    20–50 m²
    Water
    15 L tank

    Operating principle

    An ultrasonic transducer vibrates the water at high frequency and breaks it into fine droplets, and a fan blows the mist into the room.

    The manual model runs in the set mode – a separate hygrostat or humidity sensor is recommended for humidity control.

    Water is poured into a 15 L tank – the humidifier does not depend on a mains water supply.

    Why choose ES-SC-06-1?
    Industrial output of 3 kg/h in a compact housing: one unit covers a room of up to 50 m² and requires no ducts or complex installation.

    Technical specifications

    Product type Ultrasonic air humidifier
    Code ES-SC-06-1
    Humidification output 3 kg/h (max. mist output 2700 ml/h according to supplier data)
    Power 400 W
    Supply voltage 110–240 V AC
    Water supply 15 L tank
    Control manual
    Recommended area 20–50 m²
    Mist droplet size 1–10 µm
    Noise level ≤ 45 dB(A)
    Operating temperature +3 … +40 °C
    Dimensions 530 × 440 × 470 mm
    Weight ~15 kg

    Main functions

    • Ultrasonic mist – water evaporates in the air without wetting surfaces when the humidifier is correctly sized.
    • Output 3 kg/h – sufficient for a 20–50 m² room.
    • Manual control – simple and reliable, can be combined with an external hygrostat.
    • 15 L tank – no mains water connection needed.
    • Lower energy consumption – ultrasonic humidification does not heat water, so it uses less energy than steam humidification.
    • Versatile use – suitable for industry, agriculture and commercial premises.

    Where is it used?

    • Warehouses (wood, paper, textiles)
    • Print shops and packaging halls
    • Greenhouses and nurseries
    • Mushroom growing rooms
    • Production halls where static electricity must be reduced
    • Woodworking workshops
    • Larger commercial and exhibition spaces

    Use by need

    For warehouse or production managers.
    Stable humidity protects materials from drying out and reduces static discharges.
    For greenhouses or mushroom farms.
    Maintained humidity improves growing conditions for plants and mycelium.
    For print shops or furniture production.
    Paper and wood deform less, reducing rejects.

    Practical use

    If the relative humidity in a 50 m² warehouse drops to 20–30 % in winter, a 3 kg/h humidifier combined with a hygrostat and helps reduce material drying and static electricity.

    Pros

    • High output – 3 kg/h
    • Fine mist that evaporates quickly
    • Lower energy use than steam humidification
    • Simple manual control
    • No mains water needed – 15 L tank
    • Compact housing

    Cons / limitations

    • Demineralised or softened water is required – otherwise white mineral dust settles
    • No automatic humidity control – a hygrostat is needed
    • The tank must be refilled periodically
    • Ingress protection (IP) not specified – for indoor use

    Safety and installation notes

    • Connect to an earthed socket matching the 110–240 V AC supply.
    • Do not direct mist at electrical equipment, panels or luminaires.
    • Disconnect from the mains before cleaning.
    • Clean the water tank and nozzles regularly to prevent bacterial growth.
    • Do not use in rooms where the temperature is below +3 °C.
    • Do not keep relative humidity above 60–65 % for long periods – condensation may form.

    Quick selection guide

    3 kg/h
    400 W
    20–50 m²
    manual | 15 L
    Suitable when you need to:
    • maintain humidity in a 20–50 m² room;
    • reduce static electricity and material drying;
    • humidify without a mains water connection.
    Check before use:
    • room volume and air change rate;
    • water hardness (softened water recommended);
    • socket and supply voltage (110–240 V AC).
    Important reminder: a humidifier does not replace ventilation or reduce CO₂, and excessive humidity promotes condensation and mould.

    FAQ

    What room size is it suitable for?
    Recommended for 20–50 m² rooms, depending on the air change rate and target humidity.
    Can tap water be used?
    Yes, but hard water leaves white mineral dust – softened or demineralised water is recommended.
    Does it maintain humidity automatically?
    No, this is a manual model – a hygrostat is needed to maintain humidity.
    How is water supplied?
    From a 15 L tank.
    What is the power?
    400 W, supply 110–240 V AC.
    Can it be used outdoors?
    No, the humidifier is intended for indoor use.

    Ultrasonic air humidifier | 3 kg/h | 400 W | 15 L tank | 20–50 m² | manual control | ES-SC-06-1

    Ultrasonic air humidifier 3 kg/h, 400 W, for 20–50 m² rooms, with a 15 L tank and manual control – for warehouses, production halls, greenhouses and print shops.

    Published: 2026-11-12 · Data based on supplier specification: 2026-11-12

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Subscribtion to new arrivals

    privacy policy

    Information