Warning tape “Caution Cable” | 250mm | yellow/black | 2005045156635

Warning tape “CAUTION CABLE” | 250 mm | polyethylene | yellow/black | 1 m | 2005045156635

Yellow warning tape with black “CAUTION CABLE” marking, intended for warning identification of underground electrical cables and cable routes. Tape width – 250 mm, material – polyethylene. It is installed above the cable route as a visual warning of electrical infrastructure located deeper below. Sales unit – 1 m.

The tape is intended to identify the location of an underground cable route and warn about an electrical cable located deeper below during future excavation work. It is a warning and identification element, not mechanical cable protection.

The 250 mm wide tape forms a clearly visible warning marking above the cable route. The correct tape position, installation level and layout should be selected according to the project and applicable electrical cable installation requirements.

250 mm is the tape width. The sales unit is 1 metre, so the required quantity is selected according to the cable route length. The total roll length is not specified here.

The tape warns about the cable route but is not a structural or mechanical cable protection element.

• Identification of underground electrical cable routes.
• Visual warning of a cable located deeper below.
• Clear “CAUTION CABLE” marking.
• 250 mm wide tape for clearly visible warning identification.
• Yellow / black colour combination for quick recognition.
• Used when installing underground electrical cable routes and related works.
• Sales unit – 1 m.

• For marking underground electrical cable routes.
• Along cable entry routes.
• In site electrical networks.
• Along industrial cable routes.
• In external electrical networks of buildings.
• For cable lines installed during reconstruction work.
• Wherever the project specifies warning marking of underground electrical cables.

1. Install the underground cable or cable route according to the project and applicable installation requirements.
2. Backfill the cable to the level specified in the project.
3. Install the warning tape above the cable route.
4. Unless otherwise specified by the project, install the tape continuously above the marked cable route.
5. Lay the tape so that it follows the cable route as accurately as possible.
6. The tape should be installed so that its warning purpose is clearly recognisable when uncovered during excavation.
7. Determine the vertical distance between the cable and tape according to the project and applicable installation requirements.
8. If additional mechanical cable protection is specified, the warning tape does not replace it.

The position of the cable and warning tape depends on the project, cable route type, site conditions and applicable installation requirements. Therefore, one universal installation depth should not be assigned to this product.

• Use the tape as warning route marking, not as mechanical cable protection.
• Install the cable route and warning tape according to the project.
• Do not select installation depth based only on generic examples; follow the requirements for the specific site.
• Where mechanical protection is required, use the protective measures specified in the project.
• The tape should follow the cable route as accurately as possible.
• During later excavation, a detected warning tape should be treated as an indication that an electrical cable is located deeper below.

“CAUTION CABLE” | 250 mm | polyethylene | 1 m

Yellow / black warning marking tape for underground electrical cable routes. The 250 mm wide tape with clear “CAUTION CABLE” marking provides a visual warning that an electrical cable is located deeper below during future excavation work. It is a cable-route identification and warning measure, not mechanical cable protection.