Weatherproof socket outlet | 1 gang | with grounding | with transparent cover | surface-mounted | IP66 | grey | Scame | 137.6507

Weatherproof socket Scame 137.6507 – 1 gang, 16A, 250V, 2P+E, IP66, surface-mounted, with transparent cover

Scame 137.6507 – a high-sealing surface-mounted socket with grounding, designed for connecting 230V electrical equipment in locations where more reliable protection against dust, rain, water splashes and mechanical impact is required. The socket has a dark transparent cover, IP66 protection class, IK07 impact resistance and is suitable for use both indoors and in protected outdoor areas.

• In garages and workshops – for connecting power tools, extension leads and service equipment.
• In warehouses and production premises – at technical workstations and near equipment.
• In utility rooms – boiler rooms, basements, auxiliary rooms and garages.
• On terraces and in protected outdoor areas – when a socket with protection against dust and water is required.
• In car washes and technical zones – only after assessing the specific installation location and installation requirements.
• In commercial and industrial facilities – in equipment maintenance, cleaning and technical service areas.

For example, the socket can be installed on a garage or workshop wall near a workbench, machine or technical equipment. Power tools, battery chargers, cleaning equipment or other 230V devices with current not exceeding 16A can be connected to the socket.

When the socket is not in use, the cover is closed and helps protect the contacts from dust and moisture. For outdoor installation, cable entries and fixing points must be properly sealed, and the installation location must be selected according to the actual environmental conditions.

For electricians: a practical choice when a surface-mounted, sealed and mechanically more resistant 16A socket is needed in technical or more humid zones. Installation on a wall or equipment housing does not require wall chasing.

For industrial and agricultural specialists: a suitable solution for workshops, warehouses, garages, production premises, farms and technical zones where an electrical socket may be exposed to dust, water splashes or temperature fluctuations.

For homeowners: can be used in a garage, basement, boiler room, workshop, storage room or protected outdoor area when a safer and sealed socket is needed instead of a standard indoor socket.

For designers: suitable for electrical installation projects requiring an IP66 class 16A socket with grounding, surface mounting and IK07 impact resistance.

The weatherproof socket must be installed in a properly selected location and in accordance with applicable electrical installation requirements. The IP66 protection level is achieved only when the cover is properly closed, suitable cable entries are used and the housing is correctly installed.

• Installation must be carried out by a qualified electrician.
• Before installation work, the electrical power supply must be disconnected.
• Protective grounding must be connected according to the 2P+E contact scheme.
• The rated current of 16A and rated voltage of 250V must not be exceeded.
• Cable entries must be properly sealed to maintain the required sealing level.
• For outdoor installation, the actual environmental conditions, direct water exposure and installation position must be assessed.
• It is recommended to use suitable protection in the socket circuit – a circuit breaker and residual current protection according to the electrical installation design.

Quick selection guide

Choose the Scame 137.6507 weatherproof socket when a single 230V socket with grounding is required, offering better resistance to dust, moisture and mechanical impact than a standard indoor socket.

Reliable IP66 socket for more demanding working and environmental conditions

Scame 137.6507 – a practical single-gang surface-mounted socket with grounding, a dark transparent cover and IP66 protection class. It is suitable for garages, workshops, warehouses, technical rooms, production areas and protected outdoor locations.

Thanks to 16A current, 250V voltage, 2P+E contacts, IK07 impact resistance, thermoplastic housing, halogen-free construction and a wide operating temperature range, this socket is suitable for professional and household electrical installations where safety, sealing and reliable long-term use are important.