Aluminium power cable | 4x50mm² | AXMK | Class 2 | 1500m | Black

The cable is designed for electrical networks with a rated voltage of 600/1000V. Four aluminium conductors with a cross-section of 50mm² are suitable for electrical power transmission and distribution circuits. XLPE insulation allows the cable to operate at a maximum working temperature of up to 90°C, while the PVC sheath provides mechanical protection and protection against environmental influences.

The cable's black PVC outer sheath is resistant to UV radiation, allowing the cable to be used in outdoor electrical installations where it may be exposed to direct sunlight.

XLPE is used for conductor insulation. This insulating material is suitable for power cables and allows the cable to operate at a maximum working temperature of up to 90°C.

• 4x50mm² aluminium conductors are suitable for fixed electrical power transmission and distribution lines.
• Aluminium conductors help reduce cable weight and material cost compared with copper cables of the same cross-section.
• XLPE conductor insulation is designed for operation at temperatures up to 90°C.
• PVC outer sheath protects the cable construction against environmental influences.
• Can be installed outdoors, underground and in dry, damp and wet rooms.
• Suitable for installation in cable ducts and conduits.
• Can be installed directly in concrete.
• UV resistance allows the cable to be used in outdoor installations.

• Aluminium conductor: terminals, cable lugs and appropriate connection methods suitable for aluminium conductors must be used during installation.
• Class 2 conductor: the cable is intended for fixed installation and is not designed for continuous flexing or moving connections.
• Fixed power cable: the installation method, cable protection and permissible load must be selected according to the conditions of the specific installation.

At an electrical installation site, a fixed power supply line needs to be installed between the main electrical panel and another distribution point. A 4x50mm² aluminium power cable with a rated voltage of 600/1000V is used for this purpose. Part of the cable may be laid underground, while another section is routed through cable ducts or conduits inside the building. XLPE insulation and the PVC outer sheath allow the cable to be used under various environmental conditions, while the UV-resistant black sheath also makes it suitable for outdoor sections of the installation.

The cable conductors are made of aluminium. The cable has four conductors with a cross-section of 50mm².

The rated voltage of the cable is 600/1000V.

Yes. The cable is suitable for underground installation.

Yes. The cable can be used outdoors, and its black outer sheath is resistant to UV radiation.

Yes. The cable is suitable for dry, damp and wet rooms.

Yes. According to the provided information, the cable can be installed directly in concrete.

The specified maximum operating temperature is 90°C.

The conductor insulation is XLPE, while the cable outer sheath is PVC.

For connecting aluminium conductors, use only terminals, cable lugs and other connection equipment suitable for aluminium or Al/Cu connections. Cable cross-section, protective devices, installation method and permissible load must be selected according to the specific electrical installation design, installation conditions and applicable electrical safety requirements.