Axial exhaust fan with backdraft damper | D120 | 160 m³/h | 220V | 182x168x69 mm | plastic | white | IPX4
Code: ESLP22939Price 18.15 € VAT incl.( 15.00 € VAT excl. )Ø120 mm axial exhaust fan with automatic backdraft damper: 160 m³/h, 30 dB(A), 10 W, IPX4. Mounts in a wall, ceiling or duct and is connected to an external switch.
-
Axial exhaust fan with backdraft damper | D120 | 160 m³/h | 220V | 182x168x69 mm | plastic | white | IPX4
Axial exhaust fan for a Ø120 mm opening with a built-in automatic backdraft damper. Designed to remove moisture and odours from a bathroom, toilet, storeroom or other small room when the fan is switched together with the light or by a separate switch.
Key point:
This is the simplest version in the series: the fan runs while 220 V is applied, so it is easy to connect to an existing light switch or a separate switch. When the fan stops, the backdraft damper closes the duct, so cold air and odours are not drawn in from the shaft. Rated capacity is 160 m³/h, noise level 30 dB(A).Mounting diameter
Ø120 mmCapacity
160 m³/hNoise
30 dB(A)Power
10 WHow it works
The fan is inserted into a Ø120 mm duct or wall opening and fixed with a flange fixing ring and mounting brackets. Supply is 220 V AC; the fan is switched on and off by an external switch, for example together with the bathroom lighting.
When switched on, the impeller extracts air into the ventilation duct (up to 160 m³/h in free-air conditions, max. pressure 35 Pa). The air flow opens the backdraft damper; when the fan stops, the damper closes and blocks back-draught.
The result is a bathroom that dries faster, a lower risk of mould and a room that does not take in cold air from the shaft while the fan is idle.
Why choose ESLP22939?
A simple solution: it extracts air while switched on and closes the duct when idle. Suitable for replacing an old fan in the same opening while keeping the existing switch and wiring.Technical specifications
Product type Axial exhaust fan with backdraft damper Product code ESLP22939 Mounting diameter Ø120 mm Supply voltage 220 V AC Power 10 W Air flow (capacity) 160 m³/h Maximum pressure 35 Pa Noise level 30 dB(A) Dimensions 182×168×69 mm Protection rating IPX4 Control external switch in the supply circuit (e.g. together with the lighting) Backdraft damper built-in, closes when the fan stops Housing moisture-resistant plastic, white Mounting wall, ceiling or duct; a flange fixing ring and mounting brackets Front cover removable Main functions
- Automatic backdraft damper – the duct closes when the fan stops, keeping cold air and odours out of the room.
- 160 m³/h capacity – sufficient for air exchange in a small bathroom, toilet or storeroom.
- 30 dB(A) noise level – suitable for living spaces.
- IPX4 housing – protected against water splashes, suitable for damp rooms.
- Versatile mounting – in a wall, ceiling or directly in a duct.
- Removable front cover – easy to dust and to inspect the impeller.
How the models in this series differ
- ESLP22939 · D120 · basic (external switch) – 160 m³/h · 35 Pa · 30 dB(A) · 10 W · 182×168×69 mm · removable cover – this model
- ESLP22946 · D120 · with timer – 160 m³/h · 35 Pa · 30 dB(A) · 10 W · 182×168×69 mm · removable cover
- ESLP22944 · D120 · with humidity sensor and timer – 160 m³/h · 35 Pa · 30 dB(A) · 10 W · 182×168×69 mm · removable cover
- ESLP22945 · D120 · with pull-cord switch – 160 m³/h · 35 Pa · 30 dB(A) · 10 W · 182×168×69 mm · removable cover
- ESLP22940 · D100 · basic (external switch) – 105 m³/h · 32 Pa · 25 dB(A) · 8.4 W · 152×141×70 mm · removable cover
- ESLP22947 · D150 · basic (external switch) – 210 m³/h · 40 Pa · 40 dB(A) · 10 W · 211×195×81 mm · removable cover
- ESLP22968 · D120 · basic (external switch) – 190 m³/h · 40 Pa · 30 dB(A) · 10 W · 182×168×69 mm · ball-bearing motor
Where is it used?
- Bathrooms and showers
- Toilets
- Storerooms and walk-in wardrobes
- Basements and utility rooms
- Laundry and drying rooms
- Small sanitary rooms in offices and workshops
- Country houses and seasonal homes
Use by need
For apartment owners.
Replaces an old fan in the same Ø120 mm opening – the existing switch and wiring stay.For electricians.
Simple 220 V connection to a light switch or separate switch, standard Ø120 mm diameter.For storeroom or basement owners.
Switched on only when needed, while the backdraft damper keeps cold air from coming back from the duct.Practical use
If a bathroom measures 2.0 × 2.5 m with a 2.5 m ceiling (about 12.5 m³), the rated flow of 160 m³/h would theoretically change the air about 13 times per hour. In practice the flow will be lower due to duct length, bends and grilles, so for a long or winding duct a higher-capacity model of this series is worth choosing.Pros
- Simple connection to an existing switch
- Built-in automatic backdraft damper
- Quiet operation – 30 dB(A)
- Low consumption – 10 W
- Wall, ceiling or duct mounting
- IPX4 splash protection
- Removable front cover – easy to clean
Cons / limitations
- No timer or humidity sensor – runs only while switched on
- The rated 160 m³/h flow is given without duct resistance; in a long duct it is lower
- Designed for small and medium rooms, not for central ventilation systems
- No heat recovery – room air is exhausted
Safety and installation notes
- Disconnect the power before installation and make sure the circuit is de-energised.
- Protect the bathroom circuit with a 30 mA residual current device (RCD).
- IPX4 means splash protection, not immersion: do not install directly above a bath or shower tray (zone 0) and follow the zone requirements of HD 60364-7-701.
- Make sure the backdraft damper opens and closes freely – the duct or sealant must not press on it.
- Install the external switch outside the bathroom zones in line with HD 60364-7-701.
- Mains installation must be carried out by a qualified electrician.
Quick selection guide
Ø120 mm160 m³/h30 dB(A)10 WIPX4External switchSuitable when you need:- To extract moisture and odours from a bathroom or toilet
- To connect the fan to an existing light switch or separate switch
- To stop cold air coming back from the duct
Check before use:- Whether the duct or opening diameter is Ø120 mm
- Whether there is room for the 182×168×69 mm housing
- Whether a 220 V supply is available at the opening
- Whether the room has an air inlet path (gap under the door or a grille)
Important reminder: The fan does not replace continuous mechanical ventilation or a heat recovery unit – it extracts air only while running.FAQ
How is the fan switched on?
By an external switch in the supply circuit – for example together with the bathroom lighting or by a separate switch.What is the backdraft damper for?
When the fan stops it closes the duct so that cold air and odours do not enter the room.What duct diameter does ESLP22939 fit?
A Ø120 mm duct or wall opening.Can it be mounted in the ceiling?
Yes, the fan can be mounted in a wall, ceiling or duct.Does it have a timer or humidity sensor?
No, for that choose the version in the same housing with a timer (ESLP22946) or with a humidity sensor and timer (ESLP22944).Is it suitable for a bathroom?
Yes, the housing is IPX4, but install it outside zone 0 and protect the circuit with a 30 mA RCD.Axial exhaust fan with backdraft damper | D120 | 160 m³/h | 220V | 182x168x69 mm | plastic | white | IPX4
ESLP22939 is a Ø120 mm axial exhaust fan with an automatic backdraft damper: 160 m³/h, 30 dB(A), 10 W, IPX4. Designed for bathrooms, toilets and other small rooms where the fan is controlled by an external switch.
Published: 2026-11-13 · Data verified against the supplier specification: 2026-11-13
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Supply air ventilation damper in the wall | with filter | mineral wool thermal insulation with foil | D125 | 0,45m | white | 12,5TOV045-01Code: 23041Wall supply air valve Ø125 mm / 450 mm with filter, non-return valve and foil-faced mineral wool insulation. Restores fresh air supply in apartments, houses and offices, dampens street noise, while the foil protects the wool from moisture and dust.
Price 31.45 € VAT incl.( 25.99 € VAT excl. )Shut-off damper for round air duct | for ventilation | air handling systems | D100 | silver | galvanized steel | 100USOCode: 04963Round duct shut-off damper, designed to shut off, restrict, or regulate airflow in round air ducts. The damper is used in supply, exhaust, or recirculation air systems where simple and efficient control of air movement within premises is required.
Due to its galvanized steel construction, the product is resistant to corrosion, durable, and suitable for use in residential, commercial, and technical ventilation systems. Manual operation allows easy airflow adjustment without the need for an additional electric actuator or automation system.
Price 6.50 € VAT incl.( 5.37 € VAT excl. )Duct centrifugal fan | D125 | 370 m³/h | 52 W | 230 V | 310 Pa | plastic housing | white | 15622Code: 15622Duct centrifugal fan 15622: D125, up to 370 m³/h, 310 Pa, 52 W, 230 V, plastic housing.
Price 93.17 € VAT incl.( 77.00 € VAT excl. )Flexible aluminum air duct | for ventilation | ventilation systems | D100mm | 3m | white | LAO100BCode: 23033Flexible aluminium air duct - a reliable and universal solution for professional and residential ventilation systems. Designed to connect ventilation elements, fans, heat recovery components or other air distribution units.
Due to its low weight, high flexibility and resistance to high temperatures, the duct ensures quick installation, tightness and long-term operation even in more demanding conditions. The white surface blends aesthetically in technical and visible installation areas.
Price 7.20 € VAT incl.( 5.95 € VAT excl. )
























