Products catalog

  • Axial extractor fan with ball-bearing motor and insect mesh | D125 | 230V | IPX4 | plastic | white

    Code: ESLP24224

    Axial exhaust fan designed for efficient and aesthetic ventilation of rooms. This model stands out not only for its reliable operation but also for additional features such as an insect mesh, adjustable airflow, and a magnetic front panel, ensuring maximum comfort and easy maintenance. The fan is specially designed for installation in suspended ceilings, making the installation almost invisible while maintaining a clean and modern interior design. It is an ideal choice for residential, commercial, and technical premises. 

  • Axial extractor fan with ball-bearing motor and insect mesh | D125 | 230V | IPX4 | plastic | white

    The axial extractor fan with ball-bearing motor and insect mesh removes stale air from bathrooms, toilets, kitchens and storage rooms. It is mounted in a wall or ceiling into a Ø125 mm duct or opening and removes moisture and odours.

    v=>[(v.q?v.q+' m³/h airflow':'')+(v.db?(v.q?', ':'')+v.db+' dB(A) noise':'')+(v.pw?' and '+v.pw+' W power':'')+(v.q||v.db?' – a practical choice for a domestic room.':''),v.f.H?'The humidity sensor switches the fan on when humidity rises after a shower and off once the room is dry – no need to think about the switch.':v.f.T?'The timer keeps the fan running for a while after the light is switched off, so moisture and odours are fully removed.':v.f.C?'The pull-cord switch removes the need for a separate wall switch – convenient in renovations.':'It is usually connected to the light switch: the fan runs while the light is on.',v.f.V?'The backdraft shutter keeps cold air, odours and dust from the duct out when the fan is off.':''].filter(Boolean).join(' ')
    It is usually connected to the light switch: the fan runs while the light is on.
    Duct diameter
    Ø125 mm
    Control
    wall switch

    How it works

    An axial impeller driven by a 230 V motor extracts air from the room into a duct or ventilation shaft, while fresh air enters through the door gap or supply air vents.

    Why choose Axial extractor fan with ball-bearing motor and insect mesh?
    A quiet, energy-saving solution for a standard Ø125 mm opening.

    Technical specifications

    Product typeAxial extractor fan with ball-bearing motor and insect mesh
    Product codeESLP24224
    Duct (mounting) diameter125 mm
    Supply voltage230 V AC
    Ingress protectionIPX4 – protected against splashing water
    Backdraft shutterNo
    ControlExternal switch (e.g. light switch)
    Housing materialPlastic
    ColourWhite

    Key features

    • IPX4 – protection against splashing water in damp rooms
    • Ball-bearing motor – longer service life and stable operation
    • Insect mesh – keeps insects from entering through the duct

    Where is it used?

    • Bathrooms
    • Toilets
    • Kitchens (general ventilation, not instead of a cooker hood)
    • Laundry and drying rooms
    • Storage rooms, basements
    • Changing rooms, small offices

    Pros

    • IPX4 protection for damp rooms
    • Standard Ø125 mm opening

    Cons / limitations

    • No timer or humidity sensor – for that, choose fans with a timer or humidity sensor
    • IPX4 – do not install where a direct water jet can reach
    • No backdraft shutter – if the duct leads outdoors, a version with a shutter is recommended

    Safety and installation notes

    • Install only with the power disconnected; connection must be made by a qualified electrician
    • In bathrooms, follow the zone requirements of HD 60364-7-701
    • Duct diameter is 125 mm; do not reduce the cross-section and avoid long ducts with many bends
    • Ensure a fresh-air inlet into the room (door gap or supply air vent)

    FAQ

    Which duct does it fit?
    A Ø125 mm duct or opening in a wall or ceiling.
    How is the fan controlled?
    With an external switch, usually together with the light.
    Does it have a backdraft shutter?
    No, this model has no shutter; choose another version of the same series if you need one.
    Is it suitable for a bathroom with a shower?
    Yes, IPX4 protects against splashes; install outside the reach of a direct water jet and follow the zone requirements.

    Axial extractor fan with ball-bearing motor and insect mesh | D125 | 230V | IPX4 | plastic | white

    Axial extractor fan with ball-bearing motor and insect mesh Ø125 mm, IPX4 – for bathrooms, toilets and kitchens.

    Published: 2026-11-17 · Data according to supplier specification

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Duct centrifugal fan | D125 | 370 m³/h | 52 W | 230 V | 310 Pa | plastic housing | white | 15622
    Code: 15622

    Duct centrifugal fan 15622: D125, up to 370 m³/h, 310 Pa, 52 W, 230 V, plastic housing.

    Price 93.17 € VAT incl.
    ( 77.00 € VAT excl. )
    Flexible aluminum air duct | for ventilation | ventilation systems | D100mm | 3m | white | LAO100B
    Code: 23033

    Flexible aluminium air duct - a reliable and universal solution for professional and residential ventilation systems. Designed to connect ventilation elements, fans, heat recovery components or other air distribution units.

    Due to its low weight, high flexibility and resistance to high temperatures, the duct ensures quick installation, tightness and long-term operation even in more demanding conditions. The white surface blends aesthetically in technical and visible installation areas. 

    Price 7.20 € VAT incl.
    ( 5.95 € VAT excl. )
    Supply air ventilation damper in the wall | with filter | mineral wool thermal insulation with foil | D125 | 0,45m | white | 12,5TOV045-01
    Code: 23041

    Wall supply air valve Ø125 mm / 450 mm with filter, non-return valve and foil-faced mineral wool insulation. Restores fresh air supply in apartments, houses and offices, dampens street noise, while the foil protects the wool from moisture and dust.

    Price 31.45 € VAT incl.
    ( 25.99 € VAT excl. )
    Shut-off damper for round air duct | for ventilation | air handling systems | D100 | silver | galvanized steel | 100USO
    Code: 04963

    Round duct shut-off damper, designed to shut off, restrict, or regulate airflow in round air ducts. The damper is used in supply, exhaust, or recirculation air systems where simple and efficient control of air movement within premises is required.

    Due to its galvanized steel construction, the product is resistant to corrosion, durable, and suitable for use in residential, commercial, and technical ventilation systems. Manual operation allows easy airflow adjustment without the need for an additional electric actuator or automation system. 

    Price 6.50 € VAT incl.
    ( 5.37 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information