
CYKY 5x10 | Copper power cable | CYKY-L 5G10 | 1m | black | REMNANTS | 11M | 9M | 9M | 8M
Code: CYKY-5x10LPrice 6.12 € VAT incl.( 5.06 € VAT excl. )Remnants of Lietkabelis CYKY-L 5G10 (5×10 mm², 450/750 V) copper power cable from stock. Piece lengths are listed in the name; for other lengths, choose the cable by the metre.
-
CYKY-L 5G10 | 5×10 mm² | Copper power cable | REMNANTS | Lietkabelis
Remnants of AB Lietkabelis CYKY-L 5G10 copper power cable from our warehouse – pieces left over after cutting. It is the same cable we sell by the metre, offered as clearance in the lengths currently in stock.
Key point:
If you need a short 5×10 mm² run – a panel feeder, a service entry or a three-phase equipment connection – a remnant does exactly the same job as cable from the drum. Current piece lengths are listed in the product name; if the right length is not available, choose the cable sold by the metre.Cores
5 × 10 mm² (L1, L2, L3, N, PE)Rated voltage
450/750 VApprox. current rating
57 A (method C, 3 loaded cores)Sold as
Fixed-length pieces – see product nameHow does a remnant differ from cable by the metre?
The cable, manufacturer and technical parameters are identical. Only the sales form differs: remnants are sold in the lengths available in stock, so quantities are limited.
Need a different length?
Order CYKY-L 5G10 cable by the metre – we will cut the length you need.Technical specifications
Product type Copper power cable with PVC insulation and PVC sheath Manufacturer AB Lietkabelis (Lithuania) Model / designation CYKY-L 5G10 Number of cores and cross-section 5 × 10 mm² Core functions L1, L2, L3, N, PE Core colours (LST HD 308) brown, black, grey, blue, green/yellow (PE) Conductor Solid, annealed copper, class 1 (LST EN 60228) Conductor resistance at +20 °C, max. 1.83 Ω/km (LST EN 60228) Insulation TI1 type PVC (LST EN 50363-3) Filler EPDM Sheath TM1 type PVC (LST EN 50363-4-1), black Rated voltage U0/U 450/750 V Test voltage 2 kV Outer diameter (approx.) 17.23 mm Weight (approx.) 728 kg/km Minimum bending radius > 5 cable diameters (~86 mm) Max. conductor temperature +70 °C; short circuit +160 °C Thermal shock 1 h at +150 °C Installation temperature -5 °C to +40 °C Operating temperature -30 °C to +70 °C Approx. current rating 57 A (3 loaded cores); HD 60364-5-52, method C, +30 °C Flame propagation Test to LST EN 60332-1-2 Reaction to fire class (CPR) Eca (LST EN 50575), DoP LK-DoP 02/002/LT Compliance 2011/65/EU (RoHS), 2014/35/EU (LVD), Regulation (EU) No 305/2011 Installation Dry and damp rooms, outdoors, in the ground Sales unit 1 m Where is it used?
- Feeder between main and sub-distribution panels
- Three-phase service entry to a building or homestead
- Connecting a heat pump, electric boiler or other three-phase equipment
- Power supply to workshops and outbuildings
- Installation indoors, outdoors and in the ground
- Short runs when repairing or replacing an existing line
Pros
- The same Lietkabelis CYKY-L 5G10 cable as sold by the metre
- Five cores including PE – suitable for TN-S systems
- Can be laid indoors, outdoors and in the ground
- Ready-cut piece – no waiting for cutting
Cons / limitations
- Only lengths currently in stock are available
- Limited quantity – once a piece is sold, it is gone
- For a longer or specific length, choose the cable sold by the metre
Check before buying
- The piece is long enough, with allowance for stripping and termination
- The cross-section matches the protective device and installation method (HD 60364-5-52)
- Minimum bending radius – approx. 86 mm
- Installation temperature – -5 °C to +40 °C
- Final cable sizing and protection must be selected by a qualified electrician
FAQ
Is the remnant cable different from the one sold by the metre?
No, it is the same AB Lietkabelis CYKY-L 5G10 cable; only the sales form differs.Where can I see which lengths are available?
Current piece lengths are listed in the product name and updated as pieces are sold.What if I need a different length?
Order CYKY-L 5G10 cable by the metre – we will cut the length you need.Which circuit breaker suits a 5×10 mm² cable?
It depends on installation method and length; the approx. rating for method C with 3 loaded cores is 57 A, final selection is made by an electrician.CYKY-L 5G10 | 5×10 mm² | Copper power cable | REMNANTS | Lietkabelis
Remnants of Lietkabelis CYKY-L 5G10 5×10 mm², 450/750 V copper power cable from stock – fixed-length pieces for three-phase 400 V circuits. Suitable indoors, outdoors and in the ground; for other lengths, choose the cable by the metre.
Published: 2026-11-15 · Data verified against the manufacturer’s datasheet: 2026-11-13
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.Single-core wires are also called monolithic wires,
while multi-core wires are flexible wires.Wires usually have a single conductor covered with an insulating layer.
Cables have several insulated wires, covered with a common sheath.
Conductor properties of wires:
The resistance of copper conductors is lower (0.017Ω) than that of aluminum (0.028Ω),
but copper has better conductivity.
Copper has better electrical and thermal conductivity than aluminum.
Copper wires are more flexible, more resistant to corrosion, and more durable.
Aluminum wires quickly oxidize upon contact with air, forming a film that weakens the contact.
Copper wires carry higher currents than aluminum wires.
Copper conductors are denser than aluminum. Therefore, copper wire is heavier.The cross-sectional area of wires is chosen according to the power of specific equipment,
for example: for a 1kW load, a 1.57 mm² cross-sectional area of the conductor is required.
For aluminum wires: 5A per 1mm², and for copper wires: 8A per 1mm².This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Terminal | connector paste for contacts | reduces oxidation | 35.3g | WAGO | ALU PLUS | 249-130 | for connecting aluminium and copper wiresCode: 4017332133890Contact paste designed to protect aluminum conductors from oxidation and ensure a reliable electrical connection. This special paste allows aluminum and copper conductors to be safely and efficiently connected within the same connector, making it particularly useful when renovating older electrical installations where aluminum wiring is commonly found.
Aluminum naturally oxidizes, and the resulting oxide layer increases contact resistance, causes connection heating, and may become a source of electrical faults. By using WAGO ALU-PLUS, the oxidation layer is reduced, electrical conductivity is improved, and the service life of the connection is significantly extended.
Price 2.83 € VAT incl.( 2.34 € VAT excl. )Industrial modular socket panel | 2×CEE 32 A 5P 400 V + 4×Schuko 230 V | space for 11 modules of protection | IP54 | SEZ ROS11/x-22Code: 88754SEZ ROS11/x-22 – a sealed industrial panel with sockets (2×CEE 32 A 5P 400 V + 4×Schuko 230 V) and space for 11 modules of protective devices. Degree of protection: IP54, mounting – wall-mounted (surface).
Price 62.00 € VAT incl.( 51.24 € VAT excl. )Cable Cutting Scissors | 240mm² | TLK10-250 | 4606056165289Code: TLK10-250Professional cable cutting scissors designed for reliable cutting of copper and aluminum cables with a cross-section of up to 240 mm². These scissors are an essential tool for electrical installations, cable laying works, and for use in the industrial and energy sectors. The tool operates with a two-handed mechanism, ensuring greater safety and cutting precision. The high-quality construction allows operation under various environmental conditions.
Price 48.67 € VAT incl.( 40.23 € VAT excl. )Cable sheath and wire stripper 0.2–4.0 mm² | ErgoStrip KNIPEXCode: 169501SBKNIPEX high-quality, ergonomically designed wire and cable stripping tool for fast, precise, and safe work. This stripping knife is highly favored by professional electricians for its versatility, durability, and practical design. Suitable for removing insulation from both signal and power wires, as well as for installation, data, and coaxial cables.
Perfectly suited for use on construction sites and in domestic installations, especially where wires need to be quickly and accurately prepared for connection in confined spaces.
Price 48.40 € VAT incl.( 40.00 € VAT excl. )Galvanized grounding rod | Ø20 mm | 1500 mm | 5000750 219/20Code: 5000750Galvanized grounding rod designed for reliable grounding of electrical systems. It is one of the most important components in both residential and industrial installations, ensuring the safe dissipation of excess electrical energy into the ground. This rod features excellent corrosion resistance, durability, and easy installation. Due to its special construction, the electrodes can be connected to each other without additional couplings, allowing for quick and reliable installation of a grounding system even in more complex conditions.
Price 16.82 € VAT incl.( 13.90 € VAT excl. )Equipotential bonding bar | terminal | 4x7 | 4P | 100A | DIN | brass | Legrand | 04884Code: 04884 LegrandPotential equalization busbar designed to ensure reliable grounding and equipotential bonding. This solution is essential in both residential and industrial facilities where electrical safety, protection against overvoltage, and the effects of lightning discharges are important. Thanks to its robust construction, brass contacts, and safe insulating housing, the busbar ensures long-term, stable, and safe operation even under demanding operating conditions.
Price 33.38 € VAT incl.( 27.59 € VAT excl. )


















