Products catalog

Home/Product Catalog/HVAC control solutions for heating and ventilation/Electric heating/Grilles for radiators | for duct finishing/Decorative grilles for cast iron radiator decoration | metal
  • New item   Decorative steel radiator grille – cover | for 4-section cast iron radiator | metal | 390x610x140mm | brown | DRG4 br
    New item   Decorative steel radiator grille – cover | for 4-section cast iron radiator | metal | 390x610x140mm | brown | DRG4 br 1
    New item   Decorative steel radiator grille – cover | for 4-section cast iron radiator | metal | 390x610x140mm | brown | DRG4 br 2

    Decorative steel radiator grille – cover | for 4-section cast iron radiator | metal | 390x610x140mm | brown | DRG4 br

    Code: 36396
    Inquire about this item
    Price 34.46 € VAT incl.
    ( 28.48 € VAT excl. )
    Want another price? Suggest yours!

    Decorative steel grilles are a stylish and functional solution designed to cover and aesthetically integrate traditional cast iron radiators into modern or classic interiors. Made from high-quality perforated metal, these grilles not only hide old radiators but also ensure excellent heat distribution without increasing heat loss. Thanks to their robust design and universal dimensions, installation is quick and requires no special tools.

    Screws are not included in the set.

    The decorative radiator grille side finishing panel is sold separately. 

  • Product description

    Decorative steel radiator grille – cover | for 4-section cast iron radiator | metal | 390x610x140mm | brown | DRG4 br

    DRG4 br is a decorative steel cover for a sectional cast iron radiator, size 4 sections. Outer dimensions 390×610×140 mm (W×H×D), colour brown, front panel standard (non-perforated). The cover encloses the front and top of the radiator, hides an old unit and reduces the risk of direct contact with the hot surface.

    Key point:
    Replacing an old cast iron radiator is costly: the system has to be drained and the pipework altered. A cover solves the appearance and safety issue without plumbing work. The critical step is choosing the size: the section count in the name is the manufacturer's size designation, while fit depends on the actual radiator dimensions.
    Dimensions (W×H×D)
    390×610×140 mm
    Size
    4 sections, width 390 mm
    Front panel
    standard (non-perforated)
    Colour
    brown, polymer coating

    How it works

    The cover is a bent steel sheet housing with front and top sections, finished with a polymer coating. It is placed in front of the radiator and fixed through Ø8 mm holes. Fasteners are not included, so choose screws and plugs to suit the wall material.

    The standard front panel with decorative openings lets air pass through: cooler air enters from below, warms up at the radiator and rises through the panel and the top. Convection is maintained, but the cover blocks part of the radiant heat – as any radiator screen does.

    The result is a neat, uniform radiator finish without changing the pipework. The product has no side panels: if the radiator ends are visible, side panels (610×140 mm) are purchased separately.

    Why choose DRG4 br?
    One product hides the radiator and separates it from accidental touch, with no changes to the heating system. The range covers 5 sizes and 4 colours, so one style can be kept across a room or building.

    Technical specifications

    Product type Decorative steel radiator cover (trim), standard
    Model DRG4 br
    Product code 36396
    Size (manufacturer designation) 4 sections
    Outer dimensions (W×H×D) 390×610×140 mm
    Width 390 mm
    Height 610 mm
    Depth 140 mm
    Front panel standard (non-perforated)
    Material Painted steel
    Coating Polymer
    Colour brown
    Fixing Through Ø8 mm holes, fasteners not included
    Package contents Cover (without fasteners and side panels)
    Purpose Finishing of sectional cast iron radiators
    Made in Türkiye

    Size chart

    Size Width Height Depth
    3 sections 290 mm 610 mm 140 mm
    ▶ 4 sections 390 mm 610 mm 140 mm
    5 sections 490 mm 610 mm 140 mm
    6 sections 590 mm 610 mm 140 mm
    7 sections 690 mm 610 mm 140 mm

    Choose a size whose width is at least a few centimetres greater than the radiator width including plugs and connections. The highlighted row is this product.

    Main functions

    • Hides the radiator – an old or unevenly painted cast iron radiator gets a tidy finish.
    • Contact protection – the housing separates the hot radiator surface from accidental touch.
    • Air circulation – openings in the panel and the open bottom edge keep convection going.
    • Consistent style – 5 sizes (290–690 mm) and 4 colours let you match every radiator in the room.
    • No plumbing work – the cover is fitted without draining the system or disconnecting the radiator.
    • Easy care – the polymer-coated surface can be wiped with a damp cloth.

    Where is it used?

    • Flats in older apartment blocks
    • Children's rooms
    • Kindergartens and schools
    • Offices and administrative premises
    • Stairwells and corridors
    • Rental flats before letting or sale
    • Hotels and cafés during interior renovation

    Use by need

    Homeowner.
    Refreshes the interior without replacing radiators or doing plumbing work.
    Building manager.
    Uniform sizes and colours give stairwells and common areas a tidy finish.
    Finishing contractor.
    A clear size range and fixed dimensions make ordering for several sites simple.

    Practical use

    If you are renovating a room and do not plan to replace the cast iron radiator, measure the radiator width including connections, its height and its projection from the wall to the front. If all dimensions are smaller than 390×610×140 mm and there is room for the thermostatic valve, the DRG4 br cover will fit – it can be fixed without draining the system.

    Pros

    • Hides the radiator without pipework changes
    • Reduces the risk of contact with a hot surface
    • Air circulation is maintained
    • 5 sizes and 4 colours in one range
    • Steel construction with polymer coating
    • Easy-to-clean surface

    Cons / limitations

    • Part of the radiant heat is blocked – this may be noticeable in very cold rooms
    • Fasteners are not included
    • Side panels are sold separately
    • Fixed dimensions – the radiator must be measured accurately
    • The cover itself gets warm – it is not thermal insulation

    Safety and installation notes

    • Install when the radiator has cooled down.
    • Keep access to the thermostatic valve and the air vent.
    • Fix the cover securely to the wall, especially where children are present.
    • Choose fasteners to suit the wall material (concrete, brick, plasterboard).
    • Do not cover the unit with fabric or dry laundry on it – this blocks the airflow.
    • Do not seal the bottom edge – cooler air reaches the radiator through it.

    Quick selection guide

    4 sections
    390×610×140 mm
    standard
    brown
    Suitable when you need to:
    • hide an old cast iron radiator without replacing it
    • cover a radiator in children's or public areas
    • make all radiators on a site look the same
    Check before use:
    • radiator width including connections is less than 390 mm
    • radiator height is less than 610 mm
    • projection from the wall to the radiator front is less than 140 mm
    • access to the valve and air vent remains
    Important reminder: the cover does not replace radiator repair, flushing or heating system balancing, and it is not a thermal insulation product.

    FAQ

    What does “4 sections” mean?
    It is the manufacturer's size designation based on the section count of a standard cast iron radiator, but section width varies by model, so always check the actual radiator width.
    What is the difference between perforated and standard covers?
    The front panel pattern and appearance differ, while both types let air through for convection.
    Are screws included?
    No – the cover is fixed through Ø8 mm holes, and screws and plugs should be chosen to suit the wall material.
    Will the cover reduce heating?
    Convection is maintained, but part of the radiant heat is blocked, so the effect may be noticeable in cold rooms.
    Can the radiator sides be covered?
    Yes, side panels 610×140 mm are purchased separately.
    Which sizes and colours are available?
    Sizes from 3 to 7 sections (290–690 mm wide), in white, black, brown and sand, both perforated and standard.

    Decorative steel radiator grille – cover | for 4-section cast iron radiator | metal | 390x610x140mm | brown | DRG4 br

    Steel standard cover for cast iron radiators DRG4 br: 390×610×140 mm, brown, polymer coating, fixed through Ø8 mm holes. Hides an old radiator and separates the hot surface without plumbing work – compare the radiator dimensions with the cover dimensions before ordering.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Alternative products

    Flexible aluminum air duct | for ventilation | ventilation systems | D100mm | 3,15m | silver | LAO100U  
    Flexible aluminum air duct | for ventilation | ventilation systems | D100mm | 3,15m | silver | LAO100U
    Code: 18711
    Price 5.57 € VAT incl.
    ( 4.60 € VAT excl. )
    Add to cart 
    Supply air ventilation damper in wall | D125 | 0,5m | white | 12,5TOV-05 Supply air ventilation damper in wall | D125 | 0,5m | white | 12,5TOV-05  
    Supply air ventilation damper in wall | D125 | 0,5m | white | 12,5TOV-05
    Code: 09575
    Price 29.63 € VAT incl.
    ( 24.49 € VAT excl. )
    Add to cart 
    Supply air ventilation grille in wall | with filter | white Supply air ventilation grille in wall | with filter | white  
    Supply air ventilation grille in wall | with filter | white
    Code: SKU#168051250821911461
    Price 40.00 € VAT incl.
    ( 33.06 € VAT excl. )
    Add to cart 
    Fan with backdraft damper | D100 | 230V | 155x155x108mm | plastic | white | TY4STT Fan with backdraft damper | D100 | 230V | 155x155x108mm | plastic | white | TY4STT  
    Fan with backdraft damper | D100 | 230V | 155x155x108mm | plastic | white | TY4STT
    Code: 02318
    Price 34.52 € VAT incl.
    ( 28.53 € VAT excl. )
    Add to cart 

  • Subscribtion to new arrivals

    privacy policy

    Information