Products catalog

  • Duct centrifugal fan | D160 | 680 m³/h | 85 W | 230 V | 400 Pa | plastic housing | white | 15623

    Code: 15623
    Barcode: 4772318606092

    Duct centrifugal fan 15623: D160, up to 680 m³/h, 400 Pa, 85 W, 230 V, plastic housing.

  • Duct centrifugal fan | D160 | 680 m³/h | 85 W | 230 V | 400 Pa | plastic housing | white | 15623

    Fan for D160 round ducts: the 85 W, 230 V external-rotor motor delivers up to 680 m³/h airflow and up to 400 Pa pressure.

    Key point:
    Lightweight corrosion-resistant plastic housing, backward-curved impeller and a ball-bearing motor – a quiet and reliable choice for supply and extract systems in apartments, offices and commercial premises.
    Airflow
    680 m³/h
    Power / voltage
    85 W / 230 V
    Pressure
    400 Pa
    Noise
    57 dB(A)

    We will help you set up speed and automatic control

    We will advise how to adjust this fan's speed and how to switch or control it automatically according to room conditions – humidity, temperature or CO₂ concentration. We will select a suitable speed controller, thermostat, humidity or CO₂ sensor and explain how to connect them.

    Contact us: tel. +370 658 01033 or e-mail info@elsprendimai.eu

    In your e-mail, briefly describe the situation: room purpose and size, fan model and what you want to control – speed, humidity, temperature or CO₂.

    Wholesale quantities: special prices for larger orders. State the required quantity in your e-mail and we will send you an individual offer.

    Operating principle

    The backward-curved blades draw air in through the inlet spigot and push it radially into the housing, from where it continues along the same axis into the duct. This design builds more pressure than an axial fan, so airflow drops less across filters, dampers and bends.

    The motor runs at approx. 2700 rpm with a rated current of 0.39 A. Speed can be adjusted smoothly with a thyristor (triac) or autotransformer controller, and operation can be automated with a timer, humidity or CO₂ sensor.

    Why choose this fan?
    High pressure in a compact housing: up to 680 m³/h even in systems with higher resistance, simple installation straight into a D160 duct.

    Technical specifications

    Product type Duct centrifugal fan
    Code 15623
    Power supply 230 V AC, 50 Hz
    Power 85 W
    Current 0.39 A
    Speed 2700 rpm
    Airflow up to 680 m³/h
    Pressure up to 400 Pa
    Noise 57 dB(A)
    Duct diameter Ø160 mm
    Dimensions housing Ø340 mm, length 229 mm
    Motor external rotor, ball bearings
    Impeller backward-curved blades
    Housing plastic, white
    Protection IP44 (motor), IP24 (housing)
    Mounting any position, horizontal or vertical
    EAN 4772318606092
    Country of origin Turkey

    Main functions

    • High pressure – Up to 400 Pa – overcomes the resistance of filters, dampers and long ducts.
    • Direct installation – Connects straight into a Ø160 mm round duct.
    • Reliable motor – External rotor and ball bearings for long service life.
    • Speed control – Smoothly adjustable with a 230 V speed controller.

    Where is it used?

    • Apartment and house ventilation
    • Bathrooms, kitchens and utility rooms
    • Offices, shops, cafés
    • Supply and extract systems with filters
    • Warehouses and workshops

    Use by need

    For designers.
    Clear airflow, pressure and noise data for the whole series.
    For installers.
    Mounted directly in the duct, terminal box on the outside.
    For businesses.
    Durable motor and continuous maintenance-free operation.

    Practical application

    The stated 680 m³/h is achieved at zero resistance. Connect the fan to the ducts with rubber connectors or clamps so that vibration and noise are not transmitted into the duct system.

    Pros

    • Up to 680 m³/h and 400 Pa
    • Ø160 mm connection
    • Plastic housing
    • Adjustable speed

    Cons / limitations

    • Airflow decreases as system resistance rises
    • Not for explosive atmospheres
    • Not certified for fire smoke extraction

    Safety and installation notes

    • Connection must be made by a qualified specialist
    • Fit overload protection in the supply circuit
    • Mount the fan on a solid base
    • Disconnect power before maintenance
    • Keep inlet and outlet unobstructed

    Quick selection guide

    680 m³/h
    85 W / 230 V
    400 Pa
    57 dB(A)
    Suitable when you need:
    • ventilate residential or commercial premises
    • build a supply or extract system with Ø160 mm ducts
    • overcome the resistance of filters and long ducts
    Check before use:
    • whether 230 V supply is available
    • whether the duct diameter is Ø160 mm
    • whether airflow and pressure suit your system
    Important reminder: A fan works best when its airflow and pressure match the system resistance.

    FAQ

    How to control the speed?
    Use a 230 V thyristor (triac) or autotransformer speed controller sized for the motor current.
    Can it be installed vertically?
    Yes, the fan can operate in any position – horizontal or vertical.
    Is it suitable for fire smoke extraction?
    No, the fan is not certified for this purpose.

    15623 duct fan D160 680 m³/h

    Duct centrifugal fan 15623: D160, up to 680 m³/h, 400 Pa, 85 W, 230 V, plastic housing.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Supply air ventilation damper in the wall | with filter | mineral wool thermal insulation with foil | D125 | 0,45m | white | 12,5TOV045-01
    Code: 23041

    Wall supply air valve Ø125 mm / 450 mm with filter, non-return valve and foil-faced mineral wool insulation. Restores fresh air supply in apartments, houses and offices, dampens street noise, while the foil protects the wool from moisture and dust.

    Price 31.45 € VAT incl.
    ( 25.99 € VAT excl. )
    Flexible aluminum air duct | for ventilation | ventilation systems | D160mm | 3m | white | LAO160B
    Code: 23037

    Flexible aluminium air duct - a reliable and universal solution for professional and residential ventilation systems. Designed to connect ventilation elements, fans, heat recovery components or other air distribution units.

    Due to its low weight, high flexibility and resistance to high temperatures, the duct ensures quick installation, tightness and long-term operation even in more demanding conditions. The white surface blends aesthetically in technical and visible installation areas. 

    Price 11.45 € VAT incl.
    ( 9.46 € VAT excl. )
    Rotary deflector D120 | ball bearings | 300×100 mm | galvanised steel | silver
    Code: 19430

    Galvanised steel rotary deflector (wind turbine) D120 with ball bearings. Fits onto a D120 ventilation duct, extracts air without electricity and protects the duct from rain and snow.

    Price 88.33 € VAT incl.
    ( 73.00 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information