Products catalog

  • Electrical distribution | modular enclosure | box | distribution board | 16 modules | 330x175x155mm | with N+PE terminals | transparent door | waterproof | surface-mounted | plastic | IP65 | FAMATEL | AQUA combi | 3964

    Code: 3964

    The electrical distribution board is designed for the safe installation of electrical equipment, circuit breakers, relays, controllers, and other DIN modules for both indoor and outdoor use. This is a high-quality hermetic distribution enclosure distinguished by its durable construction, increased protection against environmental impact, and modern design with transparent doors. The transparent doors allow quick visual inspection of the automation status without opening the enclosure, making operation even more convenient and safer. 

  • Technical Specifications

    Product type: modular electrical distribution board
    Manufacturer: FAMATEL
    Number of modules: 16
    Mounting type: surface-mounted
    Construction: sealed plastic enclosure
    Protection rating: IP65
    Door type: transparent
    Insulation: double insulated
    UV resistance: yes
    Included accessories: N + PE terminals
    Dimensions: 330 x 175 x 155 mm
    Mounting system: DIN rail equipment
    Application: suitable for indoor and outdoor conditions
    Enclosure material: durable technical plastic
    Color: grey / transparent door
    Protection against: dust, moisture, rain, splashes, UV exposure, mechanical environmental impact

    Functions

    Hermetic IP65 protection – protects electrical components from dust, moisture, rain, and other environmental factors
    Transparent door – allows monitoring of automation status without opening the enclosure
    UV-resistant enclosure – plastic is protected against sunlight exposure, preventing fading and cracking over time
    Double insulation – ensures additional electrical safety during operation
    N + PE terminal set – convenient connection of neutral and grounding wires in one enclosure
    Surface-mounted installation – fast and simple installation on walls or structures
    Durable technical plastic – impact-resistant and suitable for demanding operating conditions

    Applications

    Residential house or apartment: Can be used for garage automation, outdoor lighting protection, heat pump protection, EV charging station protection, garden or terrace electrical distribution.
    For electricians: Convenient for installing circuit breakers, residual current devices, contactors, timers, and automation control equipment. N + PE terminals simplify organized wiring installation.
    For automation engineers: Suitable for small automation stations and technological process control units, ventilation control, pump automation, lighting systems, and PLC solutions.
    Industry and agriculture: Can be installed in production workshops, farms, warehouses, technical rooms, and workshops. The sealed enclosure protects equipment from dust and moisture.

    Advantages

    High IP65 protection rating
    Suitable for indoor and outdoor conditions
    Transparent door for convenient equipment monitoring
    UV-resistant plastic
    Double insulation
    N + PE terminals included
    Strong and durable enclosure
    Simple surface-mounted installation
    Suitable for both residential and industrial installations

    Disadvantages

    Surface-mounted enclosure is more visible on the wall
    Plastic enclosure is not as impact-resistant as a metal enclosure
    Limited space for more complex automation systems

    Frequently Asked Questions
    What material is this electrical enclosure made of?

    The enclosure is made of high-quality technical plastic resistant to moisture, UV radiation, dust exposure, and everyday operating conditions. The enclosure features double insulation for additional electrical safety.

    Where is this modular enclosure most commonly used?

    This sealed enclosure is used in residential houses, garages, workshops, outdoor installations, solar power systems, industrial facilities, automation systems, CCTV equipment, gate automation, technical rooms, and utility buildings.

    Is this enclosure suitable for outdoor use?

    Yes, due to the IP65 protection rating and UV-resistant enclosure, it is perfectly suitable for outdoor installation.

    Can automation equipment be installed inside?

    Yes, the enclosure is suitable for relays, contactors, timers, PLCs, and other DIN rail mounted automation equipment. 

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Membrane cable grommet (diaphragm) | for M9–M120 holes | for cable Ø2–100 mm | grey | IP65 | HT HSS
    Code: Sandariklis-diafragma, pilkas

    The grey HT HSS membrane cable grommet is pressed into a round hole in the enclosure and seals one cable – for Ø9–120 mm holes and Ø2–100 mm cables, IP65 (HSS-M100, HSS-M120 – IP54). Choose the size by the hole (the number after M) and the outer cable Ø; the range shown in the variant selector, e.g. 1.5–4.5 mm, is the wall thickness.

    Price 0.11 € - 7.79 € VAT incl.
    ( 0.09 - 6.44 € VAT excl. )
    Copper installation cable NYM | 2×1.5 mm² no PE | 300/500 V | white | 1 m | Lietkabelis KH05VV-U 2x1.5
    Code: 92021501

    NYM 2×1.5 mm² (KH05VV-U 2x1.5) – AB Lietkabelis copper installation cable with solid class 1 conductors, PVC insulation and a white PVC sheath, 300/500 V. For fixed installation inside buildings: in walls, under plaster, in conduits and trunking. Sold by the metre.

    2 cores (L, N) without a protective conductor – for special and control circuits only. For sockets and class I appliances choose a 3-core cable.

    Price 0.67 € VAT incl.
    ( 0.56 € VAT excl. )
    Membrane cable grommet | Ø25 mm for Ø27 mm hole | for cable Ø5–19.5 mm | white | IP54 | IEK | YSA40-25-27-68-K01
    Code: YSA40-25-27-68-K01

    IEK YSA40-25-27-68-K01 – a round stepped membrane grommet Ø25 mm, fitted into a Ø27 mm hole. Suitable for one cable with an outer diameter of 5–19.5 mm. White, polypropylene, IP54, −40…+80 °C.

    Price 0.26 € VAT incl.
    ( 0.22 € VAT excl. )
    Non-perforated DIN rail | profile | for mounting modular equipment in a distribution board | 35x7mm | 1m | BAKS | EURO | SZB35H 7/1 | 0613310
    Code: 0613310

    BAKS EURO SZB35H 7/1 – a non-perforated steel DIN rail designed for mounting modular electrical and automation equipment in distribution boards and control cabinets. Profile dimensions – 35 × 7 mm, steel thickness – 1.0 mm, length – 1000 mm (1 m). The solid non-perforated base allows mounting points to be selected according to the specific construction; the price is indicated per 1 metre. 

    Price 0.88 € VAT incl.
    ( 0.73 € VAT excl. )
    Copper installation cable NYM-J | 3×1.5 mm² | 300/500 V | white | 1 m | Lietkabelis KH05VV-U 3G1.5
    Code: 92031501 (1m)

    NYM-J 3×1.5 mm² (KH05VV-U 3G1.5) – AB Lietkabelis copper installation cable with solid class 1 conductors, PVC insulation and a white PVC sheath, 300/500 V. For fixed installation inside buildings: in walls, under plaster, in conduits and trunking. Sold by the metre.

    3 cores (L, N, PE) for single-phase 230 V installation: lighting, socket and dedicated appliance circuits.

    Price 0.89 € VAT incl.
    ( 0.73 € VAT excl. )
  • privacy policy

    Information