Products catalog

Home/Product Catalog/Electrical distribution and installation/Electrical Energy Supply | Distribution Panels | Boxes | Accessories/Sealing products | seals for electrical wires | cables | panels | boxes
  • New item   Membrane cable grommet | Ø25 mm for Ø27 mm hole | for cable Ø5–19.5 mm | white | IP54 | IEK | YSA40-25-27-68-K01

    Membrane cable grommet | Ø25 mm for Ø27 mm hole | for cable Ø5–19.5 mm | white | IP54 | IEK | YSA40-25-27-68-K01

    Code: YSA40-25-27-68-K01
    Barcode: 4606056042214
    Inquire about this item
    Price 0.26 € VAT incl.
    ( 0.22 € VAT excl. )
    Want another price? Suggest yours!

    IEK YSA40-25-27-68-K01 – a round stepped membrane grommet Ø25 mm, fitted into a Ø27 mm hole. Suitable for one cable with an outer diameter of 5–19.5 mm. White, polypropylene, IP54, −40…+80 °C.

  • Product description

    Membrane cable grommet | Ø25 mm for Ø27 mm hole | for cable Ø5–19.5 mm | white | IP54 | IEK | YSA40-25-27-68-K01

    IEK YSA40-25-27-68-K01 is a round stepped membrane grommet that is fitted into a Ø27 mm hole in a box or board wall. The cone has steps of Ø5.0 / 8.6 / 12.3 / 15.9 / 19.5 mm, so one item suits cables from Ø5 to Ø19.5 mm.

    Key point:
    When a box or board has a standard Ø27 mm hole and the cable size is not known in advance – or there are many different cables on site – a stepped grommet means one item for all cases. The cone is cut at the step slightly smaller than the cable Ø, and the hole is closed without a nut or thread. The white colour suits visible indoor installations.
    Cable Ø
    5–19.5 mm
    Hole
    Ø27 mm
    Protection
    IP54
    Temperature
    −40…+80 °C

    How it works

    Installation: press the grommet into the Ø27 mm hole in the enclosure.

    Operation: cut the cone at a step slightly smaller than the cable's outer Ø and push the cable through – the membrane wraps around it.

    Result: the hole is closed, the cable does not touch a sharp edge, and the entry point is sealed to IP54.

    Why choose YSA40-25-27-68-K01?
    One code for five cable size steps: the installer does not have to carry several gland sizes. With no nut, installation is fast – a Ø27 mm hole and a knife are enough.

    Technical specifications

    Product type Round stepped membrane grommet
    Code YSA40-25-27-68-K01
    Manufacturer IEK
    Nominal diameter 25 mm
    Enclosure hole Ø27 mm
    Cable Ø 5–19.5 mm
    Steps Ø5.0 / 8.6 / 12.3 / 15.9 / 19.5 mm
    Number of cables 1
    Degree of protection IP54 (EN 60529)
    Operating temperature −40…+80 °C
    Material polypropylene
    Colour white

    Main functions

    • Five steps – for cables from Ø5 to Ø19.5 mm.
    • Pressed into a Ø27 mm hole – no nut, no thread.
    • IP54 protection – against dust and splashing water.
    • Protection from a sharp edge – the cable does not touch the hole edge.
    • Stays closed until cut – an unused hole remains sealed.
    • White colour – looks neat in visible indoor installations.

    Where is it used?

    • Distribution and junction boxes with Ø27 mm holes
    • Small plastic boards
    • Boxes for lighting and socket circuits
    • Automation and control boxes
    • Low-voltage (alarm, communication) boxes
    • Indoor installations in offices and homes

    Use by need

    For the installing electrician.
    One item for different cable sizes from Ø5 to Ø19.5 mm – fewer sizes in the van.
    For the low-voltage installer.
    Thin alarm or communication cables enter the box neatly – the cone is cut at the Ø5.0 or Ø8.6 mm step.
    For the stock buyer.
    One code covers five cable sizes – simpler stock management.

    Practical use

    If a cable with an outer Ø of about 10 mm has to enter a junction box with a Ø27 mm hole, press the grommet into the hole, cut the cone at the Ø8.6 mm step and push the cable through – the membrane grips it tightly.

    Pros

    • Wide Ø5–19.5 mm range in one item
    • Installation without nut or thread
    • IP54 protection
    • Operating temperature −40…+80 °C
    • Clear steps – easy to cut to the right size

    Cons / limitations

    • IP54 – not for outdoor water jets or immersion; for higher protection – a gland with nut, e.g. Haupa 250050 (M25×1.5, Ø13–18 mm, IP68).
    • The membrane does not provide strain relief – fix the cable inside.
    • Fits a Ø27 mm hole only – sealing is not ensured in other holes.
    • Not for cables thinner than Ø5 mm – choose PG-07 (PG7, Ø3.5–6 mm, IP67).

    Safety and installation notes

    • Bring cables into the box or board only with the voltage switched off.
    • Drill the hole exactly Ø27 mm and remove swarf and burrs.
    • Cut the cone at a step slightly smaller than the cable Ø – an oversized opening will not seal.
    • One cable per grommet.
    • Fix the cable inside or next to the box – the membrane does not take up tension.

    Quick selection guide

    Hole Ø27 mm
    Cable Ø5–19.5 mm
    IP54
    white
    Suitable when you need:
    • Sealing a Ø27 mm hole in a box or board
    • One grommet for cables of different sizes
    • Fast installation without a nut
    Check before use:
    • The hole diameter (Ø27 mm)
    • The cable's outer diameter (5–19.5 mm)
    • Whether IP54 is sufficient for the location
    Important reminder: YSA40-25-27-68-K01 closes the hole and protects the cable from the edge, but it does not provide strain relief and is not a fire barrier.

    FAQ

    Which hole does the grommet fit?
    A Ø27 mm hole in the enclosure.
    Which cable sizes does it fit?
    A cable with an outer diameter of 5–19.5 mm.
    How do I cut the cone?
    At the step slightly smaller than the cable's outer Ø: 5.0, 8.6, 12.3, 15.9 or 19.5 mm.
    Can two cables be passed through?
    No, one grommet is for one cable.
    What is the degree of protection?
    IP54 according to EN 60529.
    What material is it made of?
    Polypropylene, operating temperature −40…+80 °C.

    Manufacturer documents

    Links open on external websites. Checked 2026-10-04. If data differ, the latest manufacturer edition applies – or contact us.

    IEK YSA40-25-27-68-K01 stepped grommet for a Ø27 mm hole

    IEK YSA40-25-27-68-K01 – white polypropylene stepped grommet Ø25 mm for a Ø27 mm hole, for one cable Ø5–19.5 mm, IP54.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Alternative products

  • Subscribtion to new arrivals

    privacy policy

    Information