Products catalog

Home/Product Catalog/Automation and Control Systems/Control components for automation and control systems/Buttons for automation control | control systems
  • New item   Extended push button | 22 mm | 1NO | blue | plastic | non-illuminated | IP40 | non-latching | Promfactor Baltic | FP PCPB blue Pl

    Extended push button | 22 mm | 1NO | blue | plastic | non-illuminated | IP40 | non-latching | Promfactor Baltic | FP PCPB blue Pl

    Code: FP PCPB blue Pl
    Barcode: 4779040158380
    Inquire about this item
    Price 1.93 € VAT incl.
    ( 1.60 € VAT excl. )

    Extended push button Ø 22 mm, 1NO, blue, IP40, Promfactor Baltic FP PCPB blue Pl. For control circuits: AC-15 6 A / DC-13 0.6 A, Ui 660 V.

  • Product description

    Extended push button | 22 mm | 1NO | blue | plastic | non-illuminated | IP40 | non-latching | Promfactor Baltic | FP PCPB blue Pl

    FP PCPB blue Pl is a blue extended plastic push button switch from the Promfactor Baltic FP series, with 1NO contact. It is mounted in a Ø 22 mm hole in a panel door, control desk or push button enclosure; front protection degree IP40.

    Key idea:
    According to EN 60204-1, blue is intended for a mandatory action, most often RESET. The NO contact closes the circuit only when pressed, so the button sends a start or control command.
    Contact
    1NO
    Button type
    extended, non-latching
    Mounting
    Ø 22 mm hole
    Illumination
    none
    Degree of protection
    IP40 front
    Colour
    blue

    How it works

    The button is inserted into a Ø 22 mm hole and tightened from the rear with a nut. The contact block is connected with screw terminals, tightening torque 0.8 Nm.

    At rest the NO contact is open; when pressed it closes the circuit, and when released the button returns to its initial position (non-latching). For starting it is connected in parallel with the contactor auxiliary contact 13–14 so that the motor keeps running after the button is released.

    The button controls only the control circuit: a contactor coil, a relay or a controller input. Motor current is switched by a contactor, not by the button.

    Why choose FP PCPB blue Pl? The extended actuator is easy to press even with gloves, and the plastic housing is a light and economical solution for dry panels.

    Technical specifications

    Product type Extended push button, non-latching
    Manufacturer / code Promfactor Baltic / FP PCPB blue Pl
    EAN 4779040158380
    Series FP (22 mm control push buttons)
    Housing plastic
    Colour blue
    Contact 1NO
    Illumination none
    Standard IEC/EN 60947-5
    Utilization category AC-15 / DC-13
    Rated voltage Ue up to 380 V AC / 220 V DC
    Rated current 6 A (AC) / 0.6 A (DC)
    Insulation voltage Ui 660 V
    Frequency 50/60 Hz
    Mechanical life 1,000,000 cycles
    Degree of protection IP40 on the operating side
    Mounting hole Ø 22 mm
    Terminal tightening torque 0.8 Nm
    Operating temperature -25…+45 °C
    Storage temperature -25…+55 °C
    Warranty 24 months from start of use (max. 30 months from sale)

    Main functions

    • 1NO contact – closes the control circuit when pressed
    • Spring return – returns to the initial position when released
    • Ø 22 mm mounting – fits standard panel holes and push button enclosures
    • Screw terminals – reliable wire connection, 0.8 Nm

    Where is it used?

    • Control panels for pumps, fans and compressors
    • Motor START–STOP control with a contactor
    • Commands in automation panels and PLC inputs
    • Push button enclosures at machines and control desks

    Use by need

    For the installing electrician. A standard 22 mm hole, screw terminals and clear contact marking allow quick installation and replacement of an old button.
    For automation panel builders. Buttons, lamps and START–STOP units from one series allow a panel with a uniform look.
    For equipment maintenance. A frequently replaced component worth keeping in stock by colour and contact.

    Practical use

    On a pumping station panel door the button sends a command to the contactor, and the contactor self-holding keeps it running after the button is released.
    Pros
    • Extended actuator – easy to press
    • Plastic ring – light and economical
    • Standard Ø 22 mm hole
    • Ui 660 V, AC-15 / DC-13
    Cons
    • IP40 – not suitable outdoors or in washdown areas without an extra cover
    • No illumination – a lamp is needed to show the status
    • Not intended for switching motor current directly

    Safety and installation notes

    • Installation and connection must be performed by a qualified electrician after disconnecting the voltage and verifying that there is none.
    • Protect the control circuit with a separate circuit breaker or fuse according to the wire cross-section.
    • Use an NC contact for the STOP function and a spring-return NO with contactor self-holding for START.
    • Metal doors with equipment must be connected to PE.
    Quick selection guide
    Ø 22 mm1NObluenon-illuminatedIP40non-latchingAC-15 / DC-13

    FAQ

    ⚡ Does FP PCPB blue Pl have illumination?
    No, this button is non-illuminated. If you need to show the status, choose the FP PCPI series with LED or a separate indicator lamp.
    ⚡ What contact does it have?
    One 1NO contact: the circuit closes when pressed.
    ⚡ What hole size is needed?
    A standard Ø 22 mm hole in a panel door, control desk or push button enclosure.
    ⚡ Does the button latch?
    No, the button is spring return – it returns to its initial position when released.
    ⚡ What current can it switch?
    According to the manufacturer, the rated current is 6 A (AC-15) and 0.6 A (DC-13). The button is intended for control circuits; the motor is connected via a contactor.

    Extended push button | 22 mm | 1NO | blue | plastic | non-illuminated | IP40 | non-latching | Promfactor Baltic | FP PCPB blue Pl

    FP PCPB blue Pl is a reliable Promfactor Baltic FP series 1NO push button for a Ø 22 mm hole. Suitable for panels, control desks and push button enclosures in dry rooms. Need help selecting buttons for a whole panel? Send us the diagram – we will select the components and send a quote.

    Published: 2026-11-05 · Data verified against the manufacturer datasheet: 2026-11-05

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Alternative products

    Control cable | 3x0.75 YSLY-JZ (OPVC-JZ) | 300/500 V | flexible | grey New item  
    Control cable | 3x0.75 YSLY-JZ (OPVC-JZ) | 300/500 V | flexible | grey
    Code: OPVC-JZ 3X0,75

    Round flexible multi-core control cable with numbered cores and a green-yellow PE core. Installed openly in dry and damp rooms; outdoors only when protected from direct sunlight.

    Price is per 1 m.

    Price 0.53 € VAT incl.
    ( 0.44 € VAT excl. )
    Add to cart 
  • privacy policy

    Information