Products catalog

  • Extractor fan | D100 | 100 m³/h | 230V | 151x151mm | IP24 | ABS plastic | white | WD100

    Code: 05113

    The fans feature a compact design, easy installation, and efficient operation, making them suitable for bathrooms, kitchens, basements, and other small rooms where proper air circulation is necessary. This wall or ceiling-mounted fan is designed to extract air and improve ventilation in humid spaces.

  • Extractor fan | D100 | 100 m³/h | 230V | 151x151mm | IP24 | ABS plastic | white | WD100

    The extractor fan WD100 removes stale air from bathrooms, toilets, kitchens and storage rooms. It is mounted in a wall or ceiling into a Ø100 mm duct or opening and removes moisture and odours.

    v=>[(v.q?v.q+' m³/h airflow':'')+(v.db?(v.q?', ':'')+v.db+' dB(A) noise':'')+(v.pw?' and '+v.pw+' W power':'')+(v.q||v.db?' – a practical choice for a domestic room.':''),v.f.H?'The humidity sensor switches the fan on when humidity rises after a shower and off once the room is dry – no need to think about the switch.':v.f.T?'The timer keeps the fan running for a while after the light is switched off, so moisture and odours are fully removed.':v.f.C?'The pull-cord switch removes the need for a separate wall switch – convenient in renovations.':'It is usually connected to the light switch: the fan runs while the light is on.',v.f.V?'The backdraft shutter keeps cold air, odours and dust from the duct out when the fan is off.':''].filter(Boolean).join(' ')
    100 m³/h airflow, 25 dB(A) noise and 14 W power – a practical choice for a domestic room. It is usually connected to the light switch: the fan runs while the light is on.
    Duct diameter
    Ø100 mm
    Airflow
    100 m³/h
    Noise level
    25 dB(A)
    Control
    wall switch

    How it works

    An axial impeller driven by a 230 V motor extracts air from the room into a duct or ventilation shaft, while fresh air enters through the door gap or supply air vents.

    Why choose WD100?
    A quiet, energy-saving solution for a standard Ø100 mm opening.

    Technical specifications

    Product typeExtractor fan
    ModelWD100
    Product code05113
    Duct (mounting) diameter100 mm
    Mounting dimensions110 × 110 mm
    Supply voltage230 V AC
    Power14 W
    Airflow100 m³/h
    Pressure32 Pa
    Noise level25 dB(A)
    Ingress protectionIP24 – protected against splashing water
    Backdraft shutterNo
    ControlExternal switch (e.g. light switch)
    Housing materialABS plastic
    ColourWhite
    Warranty5 years

    Key features

    • Airflow 100 m³/h – sufficient for a bathroom, toilet or storage room
    • 25 dB(A) – quiet operation that does not disturb adjacent rooms
    • 14 W power – low energy consumption
    • IP24 – protection against splashing water in damp rooms

    Where is it used?

    • Bathrooms
    • Toilets
    • Kitchens (general ventilation, not instead of a cooker hood)
    • Laundry and drying rooms
    • Storage rooms, basements
    • Changing rooms, small offices

    Pros

    • Quiet operation – 25 dB(A)
    • Low power – 14 W
    • IP24 protection for damp rooms
    • Standard Ø100 mm opening
    • 5-year warranty

    Cons / limitations

    • No timer or humidity sensor – for that, choose fans with a timer or humidity sensor
    • 100 m³/h may be insufficient for a large room or a long duct
    • IP24 – do not install where a direct water jet can reach
    • No backdraft shutter – if the duct leads outdoors, a version with a shutter is recommended

    Safety and installation notes

    • Install only with the power disconnected; connection must be made by a qualified electrician
    • In bathrooms, follow the zone requirements of HD 60364-7-701
    • Duct diameter is 100 mm; do not reduce the cross-section and avoid long ducts with many bends
    • Ensure a fresh-air inlet into the room (door gap or supply air vent)

    FAQ

    Which duct does it fit?
    A Ø100 mm duct or opening in a wall or ceiling.
    How is the fan controlled?
    With an external switch, usually together with the light.
    Does it have a backdraft shutter?
    No, this model has no shutter; choose another version of the same series if you need one.
    Is it suitable for a bathroom with a shower?
    Yes, IP24 protects against splashes; install outside the reach of a direct water jet and follow the zone requirements.

    Extractor fan | D100 | 100 m³/h | 230V | 151x151mm | IP24 | ABS plastic | white | WD100

    Extractor fan Ø100 mm: 100 m³/h, 25 dB(A), IP24 – for bathrooms, toilets and kitchens.

    Published: 2026-11-17 · Data according to supplier specification

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Duct fan | supply and exhaust airflow | 230V | D100 | 138x119x139mm | plastic | white
    Code: 4128

    Duct fan – a reliable, compact, and quiet solution designed for effective ventilation of bathrooms, kitchens, showers, or other household areas. Thanks to its universal installation principle, the fan is suitable for both supply and exhaust air systems. The device stands out for its durability, easy installation, and aesthetic design, making it easy to integrate into both new and renovated ventilation systems.

    Price 29.73 € VAT incl.
    ( 24.57 € VAT excl. )
    Supply air ventilation damper in the wall | with filter | mineral wool thermal insulation with foil | D125 | 0,45m | white | 12,5TOV045-01
    Code: 23041

    Wall supply air valve Ø125 mm / 450 mm with filter, non-return valve and foil-faced mineral wool insulation. Restores fresh air supply in apartments, houses and offices, dampens street noise, while the foil protects the wool from moisture and dust.

    Price 31.45 € VAT incl.
    ( 25.99 € VAT excl. )
    Shut-off damper for round air duct | for ventilation | air handling systems | D100 | silver | galvanized steel | 100USO
    Code: 04963

    Round duct shut-off damper, designed to shut off, restrict, or regulate airflow in round air ducts. The damper is used in supply, exhaust, or recirculation air systems where simple and efficient control of air movement within premises is required.

    Due to its galvanized steel construction, the product is resistant to corrosion, durable, and suitable for use in residential, commercial, and technical ventilation systems. Manual operation allows easy airflow adjustment without the need for an additional electric actuator or automation system. 

    Price 6.50 € VAT incl.
    ( 5.37 € VAT excl. )
    Flexible aluminum air duct | for ventilation | ventilation systems | D100mm | 3m | white | LAO100B
    Code: 23033

    Flexible aluminium air duct - a reliable and universal solution for professional and residential ventilation systems. Designed to connect ventilation elements, fans, heat recovery components or other air distribution units.

    Due to its low weight, high flexibility and resistance to high temperatures, the duct ensures quick installation, tightness and long-term operation even in more demanding conditions. The white surface blends aesthetically in technical and visible installation areas. 

    Price 7.20 € VAT incl.
    ( 5.95 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information