Fan with back-draught shutter | with controller | D125 | 230V | 175x175x117.5mm | IP24 | plastic | white color | TY5SHRM
Code: 02330Price 34.61 € VAT incl.( 28.61 € VAT excl. )This fan with a back-draught shutter features a quietly operating motor, lower energy consumption, and two-speed settings. It is suitable for installation in both ceilings and walls (when installing in the ceiling, the back-draught shutter must be removed). With an IP24 protection rating, it is suitable for use in damp environments, ensuring a longer service life and safety.
Quiet operation.
Low energy consumption.
Suitable for ceiling and wall installation.
Mounted with screws.
Two speeds.
IP24 protection rating.
The device switches on and off depending on light and humidity levels or based solely on the amount of moisture in the air, with a 6-mode controller.-
Technical Specifications:
Material: ABS plastic
Color: White
Protection rating: IP24
Height: 175 mm
Width: 175 mm
Overall depth: 117.5 mm
Mounting height: 155 mm
Mounting width: 155 mm
Mounting diameter: 125 mm
Outer diameter: 125 mm
Voltage: 230V
Operating mechanism: Axial
Ventilation principle: Exhaust
Control: Mechanical
Frame thickness: 31 mm
Flange depth: 78 mm
Back-draught shutter depth: 8 mm
Power consumption: 10 W
Performance: 180 m³/h
Pressure: 58 Pa
Noise level: 30 dB(A)
Current consumption: 0.05 A
Warranty: 5 years
Advantages:Quiet operation: Even at higher speeds, the fan operates very quietly.
Low energy consumption: Efficient energy use, reducing electricity costs.
Two speed options: The ability to select the desired airflow depending on needs.
Mounting flexibility: Suitable for installation on both ceilings and walls.
Protection rating IP24: Protected from water splashes, making it suitable for damp rooms.
Disadvantages:Back-draught shutter must be removed when mounting on the ceiling: This may reduce installation convenience.
Limited protection rating: IP24 protection does not ensure full water resistance, so it cannot be used in very damp environments.Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.ManufacturerThis product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Supply air ventilation damper in wall | with G3 filter | ASA plastic wall outlet | D125 | 1m | white | 12,5TOV1-02Code: 09230Wall-mounted supply air vent D125 with a 1000 mm insulated duct, G3 filter and adjustable diffuser. Outdoor side – ASA plastic external wall outlet. Intended for controlled air inflow in rooms with forced exhaust.
Price 30.65 € VAT incl.( 25.33 € VAT excl. )Rotary deflector D120 | ball bearings | 300×100 mm | galvanised steel | silverCode: 19430Galvanised steel rotary deflector (wind turbine) D120 with ball bearings. Fits onto a D120 ventilation duct, extracts air without electricity and protects the duct from rain and snow.
Price 88.33 € VAT incl.( 73.00 € VAT excl. )Shut-off damper for round air duct | for ventilation | air handling systems | D100 | silver | galvanized steel | 100USOCode: 04963Round duct shut-off damper, designed to shut off, restrict, or regulate airflow in round air ducts. The damper is used in supply, exhaust, or recirculation air systems where simple and efficient control of air movement within premises is required.
Due to its galvanized steel construction, the product is resistant to corrosion, durable, and suitable for use in residential, commercial, and technical ventilation systems. Manual operation allows easy airflow adjustment without the need for an additional electric actuator or automation system.
Price 6.50 € VAT incl.( 5.37 € VAT excl. )Flexible aluminum air duct | for ventilation | ventilation systems | D100mm | 3m | white | LAO100BCode: 23033Flexible aluminium air duct - a reliable and universal solution for professional and residential ventilation systems. Designed to connect ventilation elements, fans, heat recovery components or other air distribution units.
Due to its low weight, high flexibility and resistance to high temperatures, the duct ensures quick installation, tightness and long-term operation even in more demanding conditions. The white surface blends aesthetically in technical and visible installation areas.
Price 7.20 € VAT incl.( 5.95 € VAT excl. )Duct centrifugal fan | D125 | 370 m³/h | 52 W | 230 V | 310 Pa | plastic housing | white | 15622Code: 15622Duct centrifugal fan 15622: D125, up to 370 m³/h, 310 Pa, 52 W, 230 V, plastic housing.
Price 93.17 € VAT incl.( 77.00 € VAT excl. )


























