Products catalog

Home/Product Catalog/Automation and Control Systems/Control components for automation and control systems/Trolleys | Crane Control Panels | Hoist Control | Joystick/Industrial crane control panels | wired control solutions
  • New item   Industrial crane pendant control station | 6 buttons + twist-release STOP | 1 speed | 10 A | 500 V | IP54 | black buttons | ES-TNHA1-63C
    New item   Industrial crane pendant control station | 6 buttons + twist-release STOP | 1 speed | 10 A | 500 V | IP54 | black buttons | ES-TNHA1-63C 1
    New item   Industrial crane pendant control station | 6 buttons + twist-release STOP | 1 speed | 10 A | 500 V | IP54 | black buttons | ES-TNHA1-63C 2
    New item   Industrial crane pendant control station | 6 buttons + twist-release STOP | 1 speed | 10 A | 500 V | IP54 | black buttons | ES-TNHA1-63C 3
    New item   Industrial crane pendant control station | 6 buttons + twist-release STOP | 1 speed | 10 A | 500 V | IP54 | black buttons | ES-TNHA1-63C 4

    Industrial crane pendant control station | 6 buttons + twist-release STOP | 1 speed | 10 A | 500 V | IP54 | black buttons | ES-TNHA1-63C

    Code: ES-TNHA1-63C
    Inquire about this item
    Price 40.27 € VAT incl.
    ( 33.28 € VAT excl. )
    Want another price? Suggest yours!

    Pendant control station for cranes and hoists with 6 black buttons and a latching twist-to-release emergency stop. Straight yellow housing, IP54 – for indoor use.

  • Product description

    Industrial crane pendant control station | 6 buttons + twist-release STOP | 1 speed | 10 A | 500 V | IP54 | black buttons | ES-TNHA1-63C

    ES-TNHA1-63C is a pendant control station for overhead and jib cranes and hoists with trolley. Six black single-speed buttons control three axes of motion, and the red latching STOP de-energises the main contactor.

    Key point:
    Six buttons and an emergency stop in one housing – the basic control set for an overhead crane. Black buttons contrast sharply with the yellow housing and show less dirt when handling oily parts.
    Buttons
    6 + emergency STOP
    Speeds
    1
    Contacts
    AC-15: 250 V – 5 A
    Protection rating
    IP54

    How it works

    The pendant is connected by a control cable to the crane's contactor circuit. The cable enters through a protective sleeve at the rear.

    Six momentary buttons control individual contactors. When pressed, the twist-release STOP latches and stays off until the operator releases it by twisting.

    After an emergency stop the crane remains stopped until STOP is deliberately released, so the equipment cannot restart by itself.

    Why choose ES-TNHA1-63C?
    Full overhead crane control with emergency stop and high-contrast black buttons. Practical in metalworking and repair environments where buttons quickly get dirty.

    Technical specifications

    Product type Industrial crane / hoist pendant control station
    Model ES-TNHA1-63C
    Number of buttons 6 + emergency STOP
    Button colour Black
    Number of speeds 1
    Emergency STOP Latching, twist-to-release
    Rated insulation voltage (Ui) 500 V
    Thermal current (Ith) 10 A
    AC-15 500 V – 2 A; 250 V – 5 A
    Protection rating IP54
    Operating temperature −25 °C to +40 °C
    Mechanical endurance up to 1 000 000 cycles
    Housing Plastic, yellow, straight
    Certificates CE, ISO 9001, CCC

    Key features

    • 6 momentary buttons – hoist, bridge and trolley in one pendant
    • Latching twist-to-release STOP – the crane will not restart until STOP is released
    • AC-15 500 V – 2 A / 250 V – 5 A – suitable for switching contactor coils
    • Black buttons – high contrast and less visible dirt
    • Protective cable sleeve – reduces cable breakage at the entry
    • Up to 1 000 000 cycles – long service life

    Where is it used?

    • Overhead cranes in workshops
    • Jib cranes
    • Hoists with electric trolley
    • Metalworking and repair shops
    • Warehouse lifting equipment
    • Production line service cranes
    • Replacing old pendants

    Use by requirement

    For a metalworking company.
    Black buttons stay legible even when working in oily gloves.
    For the electrician.
    Clear contact logic and AC-15 data – easy to select the control voltage.
    For the crane owner.
    All 3 axes plus an emergency STOP at an affordable price.

    Practical application

    If light-coloured pendant buttons in a repair shop quickly become illegible from oil, ES-TNHA1-63C with black buttons and clear symbols keeps the controls readable.

    Pros

    • Latching emergency STOP
    • 6 buttons – 3 axes of motion
    • High-contrast black buttons
    • AC-15 data clearly stated
    • Straight, easy-to-clean housing

    Cons / limitations

    • IP54 – not suitable outdoors or in washdown areas; choose IP56 ESYS6-36F there
    • Single speed only – for a 2-speed crane choose ES-XAC-A6913
    • Contacts are rated for coils, not for the motor
    • No START button – if required, choose ES-7MS

    Safety and installation notes

    • Install with the supply disconnected and verified dead
    • STOP must de-energise the main (line) contactor
    • Control voltage and current must comply with the AC-15 data
    • Electrically interlock opposite-direction contactors
    • Suspend the pendant from a steel strain-relief wire
    • Lock out the main isolator with a LOTO lockout before any repair

    Quick selection guide

    6 buttons + STOP
    1 speed
    IP54
    250 V – 5 A
    Suitable when you need to:
    • Control an overhead crane indoors
    • Have high-contrast buttons in an oily environment
    • Have an emergency STOP on the pendant
    Check before use:
    • Control voltage and current comply with the AC-15 data
    • The environment is dry (IP54)
    • STOP is wired to the main contactor
    Important reminder: A pressed STOP is not safe energy isolation – for repair the main isolator is switched off and locked out with a LOTO lockout.

    FAQ

    Does the emergency STOP latch?
    Yes, once pressed it stays latched and is released by twisting.
    What is the protection rating?
    IP54 – intended for indoor areas without water-jet washdown.
    How many motions can be controlled?
    Six: hoisting / lowering and two travel axes in both directions.
    What control voltage can be used?
    Up to 500 V, but at 500 V the rating is 2 A and at 250 V it is 5 A (AC-15).
    Is it suitable for a 2-speed crane?
    No, the buttons are single-speed.
    How does it differ from ES-TNHA1-63H and 63G?
    63C has black buttons and a straight housing, 63H has light-coloured buttons, and 63G has an ergonomic handle-shaped housing.

    Industrial crane pendant control station | 6 buttons + twist-release STOP | 1 speed | 10 A | 500 V | IP54 | black buttons | ES-TNHA1-63C

    ES-TNHA1-63C pendant control station for overhead cranes and hoists with 6 black buttons, latching emergency STOP and IP54 housing – reliable control for indoor use.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Alternative products

    Copper installation cable NYM | 2×1.5 mm² no PE | 300/500 V | white | 1 m | Lietkabelis KH05VV-U 2x1.5 New item  
    Copper installation cable NYM | 2×1.5 mm² no PE | 300/500 V | white | 1 m | Lietkabelis KH05VV-U 2x1.5
    Code: 92021501
    Price 0.67 € VAT incl.
    ( 0.56 € VAT excl. )
    Add to cart 

  • Subscribtion to new arrivals

    privacy policy

    Information