Products catalog

Home/Product Catalog/Automation and Control Systems/Control components for automation and control systems/Buttons for automation control | control systems
  • New item   Double push button START–STOP | 22 mm | 1NO+1NC | red / green | LED 230 V | IP40 | non-latching | Promfactor Baltic | FP PrecI LG 1NO+1NC

    Double push button START–STOP | 22 mm | 1NO+1NC | red / green | LED 230 V | IP40 | non-latching | Promfactor Baltic | FP PrecI LG 1NO+1NC

    Code: FP PrecI LG 1NO+1NC
    Barcode: 4779040157925
    Inquire about this item
    Price 8.22 € VAT incl.
    ( 6.79 € VAT excl. )

    Double push button START–STOP Ø 22 mm, 1NO+1NC, red (STOP) and green (START), LED 230 V, IP40, Promfactor Baltic FP PrecI LG 1NO+1NC. For control circuits: AC-15 6 A / DC-13 0.6 A, Ui 660 V.

  • Product description

    Double push button START–STOP | 22 mm | 1NO+1NC | red / green | LED 230 V | IP40 | non-latching | Promfactor Baltic | FP PrecI LG 1NO+1NC

    FP PrecI LG 1NO+1NC is a double START–STOP push button switch from the Promfactor Baltic FP series, with 1NO+1NC contacts and 230 V LED illumination. It is mounted in a Ø 22 mm hole in a panel door, control desk or push button enclosure; front protection degree IP40.

    Key idea:
    The red STOP and green START parts are in one housing, so the operator sees both functions in one place. The NO contact starts, the NC contact stops – complete motor control through one 22 mm hole.
    Contact
    1NO+1NC
    Button type
    double, non-latching
    Mounting
    Ø 22 mm hole
    Illumination
    LED 230 V
    Degree of protection
    IP40 front
    Colour
    red (STOP) and green (START)

    How it works

    The button is inserted into a Ø 22 mm hole and tightened from the rear with a nut. The contact block is connected with screw terminals, tightening torque 0.8 Nm.

    When the green START is pressed, the NO contact briefly closes the contactor coil circuit and the contactor auxiliary contact 13–14 holds it (self-holding). When the red STOP is pressed, the NC contact opens the circuit and the contactor releases. The LED connected in parallel with the coil shows that the motor is running.

    The LED illumination is powered at 230 V, so the control circuit must have the same voltage. A different voltage will burn out the LED or it will not light.

    Why choose FP PrecI LG 1NO+1NC? Instead of two buttons and an indicator – one product in one 22 mm hole. This is especially handy for small doors.

    Technical specifications

    Product type Double push button START–STOP, non-latching
    Manufacturer / code Promfactor Baltic / FP PrecI LG 1NO+1NC
    EAN 4779040157925
    Series FP (22 mm control push buttons)
    Colour red (STOP) and green (START)
    Contact 1NO+1NC
    Illumination LED 230 V
    Standard IEC/EN 60947-5
    Utilization category AC-15 / DC-13
    Rated voltage Ue up to 380 V AC / 220 V DC
    Rated current 6 A (AC) / 0.6 A (DC)
    Insulation voltage Ui 660 V
    Frequency 50/60 Hz
    Mechanical life 1,000,000 cycles
    Degree of protection IP40 on the operating side
    Mounting hole Ø 22 mm
    Terminal tightening torque 0.8 Nm
    Operating temperature -25…+45 °C
    Storage temperature -25…+55 °C
    Warranty 24 months from start of use (max. 30 months from sale)

    Main functions

    • 1NO+1NC contact – START closes, STOP opens the circuit
    • Spring return – returns to the initial position when released
    • LED indication – shows the status, 230 V
    • Ø 22 mm mounting – fits standard panel holes and push button enclosures
    • Screw terminals – reliable wire connection, 0.8 Nm

    Where is it used?

    • Control panels for pumps, fans and compressors
    • Motor START–STOP control with a contactor
    • Commands in automation panels and PLC inputs
    • Push button enclosures at machines and control desks

    Use by need

    For the installing electrician. A standard 22 mm hole, screw terminals and clear contact marking allow quick installation and replacement of an old button.
    For automation panel builders. Buttons, lamps and START–STOP units from one series allow a panel with a uniform look.
    For equipment maintenance. A frequently replaced component worth keeping in stock by colour and contact.

    Practical use

    In a small pump panel one 22 mm hole holds START and STOP, and the LED (230 V) shows that the pump is running. The unit is connected via a contactor with a thermal relay.
    Pros
    • START, STOP and LED in one hole
    • Saves space on the door
    • Standard Ø 22 mm hole
    • Ui 660 V, AC-15 / DC-13
    Cons
    • IP40 – not suitable outdoors or in washdown areas without an extra cover
    • The LED voltage must exactly match the control voltage
    • Not intended for switching motor current directly

    Safety and installation notes

    • Installation and connection must be performed by a qualified electrician after disconnecting the voltage and verifying that there is none.
    • Protect the control circuit with a separate circuit breaker or fuse according to the wire cross-section.
    • Use an NC contact for the STOP function and a spring-return NO with contactor self-holding for START.
    • Metal doors with equipment must be connected to PE.
    Quick selection guide
    Ø 22 mm1NO+1NCred (STOP) and green (START)LED 230 VIP40non-latchingAC-15 / DC-13

    FAQ

    ⚡ Does FP PrecI LG 1NO+1NC have illumination?
    Yes, 230 V LED illumination. It is connected to a control circuit of the same voltage.
    ⚡ What contact does it have?
    Two contacts: START – 1NO, STOP – 1NC.
    ⚡ What hole size is needed?
    A standard Ø 22 mm hole in a panel door, control desk or push button enclosure.
    ⚡ Does the button latch?
    No, the button is spring return – it returns to its initial position when released.
    ⚡ What current can it switch?
    According to the manufacturer, the rated current is 6 A (AC-15) and 0.6 A (DC-13). The button is intended for control circuits; the motor is connected via a contactor.

    Double push button START–STOP | 22 mm | 1NO+1NC | red / green | LED 230 V | IP40 | non-latching | Promfactor Baltic | FP PrecI LG 1NO+1NC

    FP PrecI LG 1NO+1NC is a reliable Promfactor Baltic FP series 1NO+1NC push button for a Ø 22 mm hole with 230 V LED. Suitable for panels, control desks and push button enclosures in dry rooms. Need help selecting buttons for a whole panel? Send us the diagram – we will select the components and send a quote.

    Published: 2026-11-05 · Data verified against the manufacturer datasheet: 2026-11-05

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Alternative products

    Crane control panel | with 4 buttons | 5A | 120–400V | IP54 Top seller  
    Crane control panel | with 4 buttons | 5A | 120–400V | IP54
    Code: BPU10-4

    Button control panels are designed for switching electrical control circuits of lifting mechanisms. The sealed IP54 enclosure is made of heat-resistant ABS plastic with built-in buttons. A protective gland is provided to seal the cable entry, and a sealing gasket is installed between the enclosure and the panel.

    The buttons meet the "CE" standard requirements in terms of design and technical specifications.

    The remote control panels have passed certification tests and have received serial production conformity certificates.
    Available with 2, 4, or 6 buttons.
    The housing is made of non-flammable ABS plastic.
    The cable entry includes a protective gland that prevents moisture and dust from entering the housing. 

    Price 20.57 € VAT incl.
    ( 17.00 € VAT excl. )
    Add to cart 
  • privacy policy

    Information