
Industrial mechanical thermostat | -20…+40 °C | 15(6) A 250 V AC | SPDT | IP65 | external adjustment | Fantini Cosmi C10B2Y
Code: C10B2YPrice 54.45 € VAT incl.( 45.00 € VAT excl. )Sealed IP65 mechanical thermostat that senses ambient temperature within -20…+40 °C in warehouses, greenhouses and electrical panels. The SPDT changeover contact rated 15(6) A 250 V AC switches heating or ventilation without any power supply.
-
Industrial mechanical thermostat Fantini Cosmi C10B2Y, -20…+40 °C, 15(6) A 250 V AC, IP65
Fantini Cosmi C10B2Y is a mechanical room (ambient air) thermostat in a sealed IP65 housing. Temperature is sensed by a liquid-filled spiral capillary: as temperature rises, the liquid expands, pushes a stainless steel membrane and operates a microswitch. The scale is -20…+40 °C, set with an external knob. Designed for warehouses, cold rooms, greenhouses and industrial electrical panels.
⚠ ⚠ 15(6) A contact per EN 60730-1: resistive load up to 15 A, inductive (cos φ 0.6) up to 6 A; for electromagnetic loads (AC-15, e.g. contactor coils) the manufacturer specifies 2.5 A at 220–250 V AC. Switch motors, compressors and larger fans via a contactor.Key idea:
It is a simple and reliable way to hold temperature where electronic controllers struggle: dust, moisture, cold. The thermostat needs no power supply – it simply opens or closes the circuit. The SPDT contact lets the same device be used for heating as well as ventilation or cooling. The 2 K differential protects equipment from short cycling.Scale
-20…+40 °CContact
SPDT 15(6) A 250 V ACDifferential
2 ± 0.5 KProtection
IP65Operating principle
The sensing element is a liquid-filled spiral capillary made of tinned copper. As air temperature changes, the liquid volume changes and transfers force through a stainless steel membrane to a snap-action microswitch.
On rising temperature contact 1-2 opens, 1-4 closes. For heating use circuit 1-2 (the heater switches off at the setpoint); for ventilation or cooling use 1-4 (the fan switches on when temperature rises).
The 2 ± 0.5 K differential is subtracted from the scale value: with a setting of +10 °C, heating switches back on at about +8 °C.
Why choose the C10B2Y?
It covers the range from hard frost to summer heat, so it suits unheated warehouses, outdoor cabinets and greenhouses all year round. The IP65 housing allows installation in damp and dusty rooms without an extra enclosure.Technical specifications
Product type Mechanical room (ambient) thermostat Manufacturer / model Fantini Cosmi C10B2Y Scale range -20…+40 °C Differential 2 ± 0.5 K (subtracted from the scale value) Calibration accuracy ± 2 °C Adjustment External, by knob Contact SPDT, snap-action microswitch; on rising temperature 1-2 opens, 1-4 closes Contact rating (EN 60730-1) 15(6) A, 250 V~, 50 Hz AC-12 / AC-15 (220–250 V~) 15 A / 2.5 A DC-13 0.2 A Insulation voltage Ui / Ith 380 V~ / 15 A Operating principle Liquid expansion, spiral tinned copper capillary, stainless steel membrane Max. permissible body temperature 60 °C Degree of protection IP65 Housing Impact-resistant, self-extinguishing V0 thermoplastic Cable entry Cable gland Mounting Wall Weight 0.16 kg Standards EN 60730-1, EN 60730-2-9, EN 60947-5-1 Main functions
- Ambient temperature sensing – the spiral capillary reacts quickly to room air temperature.
- SPDT changeover contact – one device for heating (1-2) or ventilation (1-4).
- Direct load switching – resistive loads up to 15 A without an interposing relay.
- Fixed 2 K differential – stable operation without frequent contact switching.
- IP65 housing – works in damp, dusty environments.
- No power supply needed – no electronics to fail from frost or surges.
How does it differ from similar products?
Fantini Cosmi C10C2RIY Scale -35…+20 °C, adjustment under the cover (no knob) – for refrigeration and places where the setting must not be changed by others. DIN-rail panel thermostat Mounted inside the panel to control a panel heater; the C10B2Y is wall-mounted and measures the whole room. Electronic thermostat with display More accurate and shows temperature but needs power; the C10B2Y works mechanically and tolerates harsh conditions better. Where is it used?
- Unheated and heated warehouses
- Cold and chilled rooms (down to -20 °C)
- Greenhouses and growing rooms
- Meat and cheese curing rooms
- Industrial electrical panels and outdoor cabinets
- Pump stations, boiler rooms, technical rooms
Use by need
Beginner.
For heating, connect the phase to terminal 1 and the heater to terminal 2. Set the required temperature with the knob – nothing else to adjust.Experienced installer.
Use terminal 4 for ventilation or alarm, and switch inductive loads above 2.5 A via a contactor.Energy engineer / designer.
Take into account the ± 2 °C calibration accuracy and 2 K differential – for critical processes add a second thermostat for alarm.Practical use
In an unheated warehouse with water systems, the C10B2Y is set to +5 °C: contact 1-2 switches a 6 kW air heater on via a contactor when temperature drops to about +3 °C and off at +5 °C. In summer the same device can be rewired to 1-4 to control an exhaust fan.Pros / advantages
- IP65 – suitable for damp and dusty rooms
- Wide -20…+40 °C range for all seasons
- SPDT contact for heating or cooling
- Resistive loads up to 15 A directly
- No power supply needed, simple wiring
- Complies with EN 60730-1, EN 60730-2-9, EN 60947-5-1
Cons / limitations
- No temperature indication
- Calibration accuracy ± 2 °C – not for laboratory precision
- Inductive load only up to 2.5 A (AC-15)
- The knob can be turned by others – the RI version solves this
Safety and installation notes
- ⚡ Installation and connection by a qualified electrician; disconnect power before opening the cover.
- ⚡ Protect the circuit with a circuit breaker not exceeding the contact and cable ratings.
- Mount on a wall in the zone whose temperature must be held, away from heaters, doors and direct sunlight.
- Route the cable through the gland and tighten it properly – otherwise IP65 is not maintained.
- Body temperature must not exceed 60 °C.
- Do not use in explosive atmospheres without Ex certification.
Quick selection guide
-20…+40 °CSPDT 15(6) AIP65External knobSuitable when you need:- to hold air temperature in a warehouse or greenhouse
- to protect a room or panel from freezing or overheating
- reliable mechanical control in a damp environment
Check before choosing:- Whether the required temperature is within -20…+40 °C
- Load type and current (resistive up to 15 A, inductive up to 2.5 A)
- Whether the setting should be accessible or protected (then the RI version)
Important reminder: The C10B2Y measures the air around itself – it is not intended for liquid or pipe temperature. For that use a thermostat with a remote sensor or an immersion sensor in a thermowell.☝ Elsprendimai.eu recommends:- Contactors and relays – to switch powerful heaters and motors via the thermostat.
- Panel heaters – together with the thermostat protect equipment from frost and condensation.
- Other thermostats – if you need another range or mounting method.
- Sensor selection guide – how to choose the right type.
FAQ
Is the C10B2Y suitable for heating and cooling?
Yes. Contact 1-2 is used for heating and 1-4 for ventilation or cooling, because on rising temperature 1-2 opens and 1-4 closes.What load can be switched directly?
Resistive up to 15 A and inductive (cos φ 0.6) up to 6 A per EN 60730-1; electromagnetic loads (AC-15) up to 2.5 A at 220–250 V AC. Switch motors and larger loads via a contactor.Does the thermostat need a power supply?
No. It is a mechanical device that only switches a contact, so no neutral connection is required.What is the difference between C10B2Y and C10B2RIY?
The scale is the same, but the RI version has no knob – temperature is set under the cover and cannot be changed by others.Can it be installed outdoors?
The housing is IP65, but protect it from direct sun and precipitation so it measures the true air temperature.How accurate is the thermostat?
The manufacturer states ± 2 °C calibration accuracy and a 2 ± 0.5 K differential.Sources: Fantini Cosmi C10..Y series datasheet, C10 series technical sheet. Checked 2026-10-18.
Fantini Cosmi C10B2Y – a reliable IP65 thermostat for warehouses and panels
Fantini Cosmi C10B2Y is a mechanical IP65 ambient thermostat for the -20…+40 °C range with an SPDT contact rated 15(6) A 250 V AC. It controls heating or ventilation in warehouses, greenhouses and electrical panels without any additional power supply.
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Smart | remote water valve controller | 12V | 1.6 MPa | Wi-Fi | Tuya | NOUS-L3 | 5907772033951Code: NOUS-L3NOUS L3 smart remote water valve controller is a practical solution that allows you to open or close a water valve remotely via a smartphone. The device operates via a 2.4 GHz Wi-Fi connection, is controlled through the Nous Smart Home app, and is compatible with Amazon Alexa and Google Assistant voice assistants.
This controller is especially useful where it is necessary to automate water supply, reduce the risk of water leakage, or conveniently control water supply according to a schedule. It can be used for controlling a building’s water inlet, irrigation systems, filling water tanks, swimming pools, or drinking troughs.
Price 37.89 € VAT incl.( 31.31 € VAT excl. )








