Products catalog

Home/Product Catalog/Automation and Control Systems/Control components for automation and control systems/Trolleys | Crane Control Panels | Hoist Control | Joystick/Wireless industrial crane control panels | remote control systems
  • New item   Wireless crane remote control | 10 buttons + START/STOP | 1 speed | 310/410 MHz | 110/220 V AC | IP65 | ES-24-10S
    New item   Wireless crane remote control | 10 buttons + START/STOP | 1 speed | 310/410 MHz | 110/220 V AC | IP65 | ES-24-10S 1
    New item   Wireless crane remote control | 10 buttons + START/STOP | 1 speed | 310/410 MHz | 110/220 V AC | IP65 | ES-24-10S 2

    Wireless crane remote control | 10 buttons + START/STOP | 1 speed | 310/410 MHz | 110/220 V AC | IP65 | ES-24-10S

    Code: ES-24-10S
    Inquire about this item
    Price 136.47 € VAT incl.
    ( 112.79 € VAT excl. )
    Want another price? Suggest yours!

    10 single-speed pushbutton radio remote for crane motions and auxiliary functions. Suits cranes with direct-on-line motors where many functions are needed but one speed is enough.

  • Product description

    Wireless crane remote control ES-24-10S – 10 buttons, 1 speed

    The ES-24-10S is an industrial radio remote for operating a crane from a safe distance. When a button is pressed, the transmitter sends a coded command, the receiver relays energise the matching contactor coils, and the contactors switch the motors. Control range is up to ~150 m in open space.

    Key point:
    When a crane has more than three motions (e.g. two hoists) or extra devices, 10 buttons let you run everything from one remote. Single-speed logic is simple – each button drives one contactor.
    Buttons
    10 + START/STOP
    Speeds
    1
    Radio
    310/410 MHz, up to ~150 m
    Receiver
    110/220 V AC, relays 10 A

    How it works

    The receiver is mounted in or next to the crane control cabinet. Its supply voltage must match the contactor coil control circuit voltage (110/220 V AC), and the relay outputs are wired to the direction contactor coils.

    Turning the key and pressing START energises the MAIN relay and the main contactor KM0. Pressing the mushroom STOP or losing the radio link must drop out KM0 and stop the crane – this is an EN 60204-32 requirement; verify it during commissioning.

    The operator stands where the load is best visible instead of next to a pendant. Single-speed buttons are simple – fewer mistakes when different staff use the remote.

    Why choose the ES-24-10S?
    Many control channels without the complexity of two speeds and without costlier drive equipment. Wiring is straightforward: one relay – one contactor coil.

    Technical specifications

    Product type Wireless crane remote control (transmitter + receiver)
    Model ES-24-10S
    Package contents Transmitter, receiver
    Buttons 10 buttons; START, mushroom STOP, rotary key switch
    Speeds 1
    Radio frequency 310 MHz / 410 MHz (check if permitted in your country)
    Control range up to ~150 m in open space
    Receiver supply 110/220 V AC; options: 24/48/110/220 V AC, 12/24 V DC
    Receiver relay contacts 10 A, 250 V AC
    Security code 4.3 billion unique ID codes
    Transmitter power 2 × AA, LED battery indicator
    Button life up to 2 million cycles
    Protection rating IP65
    Operating temperature −35…+75 °C
    Transmitter dimensions / weight ~51 × 51 × 184 mm, 0.31 kg
    Receiver dimensions / weight ~165 × 114 × 254 mm, 3.18 kg

    Main functions

    • Mushroom STOP – drops out main contactor KM0 and stops all motions
    • START and key switch – the remote cannot be switched on without the key
    • Single-speed buttons – one relay drives one contactor coil
    • 4.3 billion ID codes – the transmitter controls only its own receiver, neighbouring cranes do not interfere
    • LED battery indicator – replace the 2 × AA in time
    • 10 A relays – for switching contactor coils

    How does it differ from similar models?

    • ES-24-10D – Same 10 buttons but two-step – slow and fast speed.
    • ES-F23-BB – 10 buttons, 1 speed, 24–440 V AC/DC receiver, 315/433 MHz.
    • ES-24-12S – 12 buttons, 1 speed – when 10 channels are not enough.

    Where is it used?

    • Overhead cranes in production halls
    • Jib and wall-mounted cranes at workstations
    • Gantry cranes in warehouses and steel yards
    • Electric hoists and winches
    • Transfer carts and rail trolleys
    • Replacing old pendant controls with radio control

    Use by need

    For electricians
    Clear logic: relay → contactor coil, STOP → KM0. The existing crane circuit stays, only the control station changes.
    For manufacturers
    The operator works from a safe position with sight of the load – fewer impacts and less downtime.
    For construction / warehouse yards
    IP65 transmitter and control up to ~150 m – suitable for outdoor and unheated areas.

    Practical use

    If a gantry crane has two hoists, a bridge and a trolley with direct-on-line motors, then the ES-24-10S buttons are assigned in pairs to each motion and each relay switches one contactor coil.

    Pros

    • Simple single-speed control – easy to wire and train operators
    • Key switch and START – protection against accidental start-up
    • 4.3 billion ID codes – several cranes in one hall
    • Button life up to 2 million cycles
    • IP65, −35…+75 °C – also for unheated areas

    Cons / limitations

    • 310/410 MHz is not an EU SRD band; for the EU market 433 MHz models such as ES-F23-BB are usually a better fit
    • 10 A relays are for the control circuit only – contactors are required
    • Only 1 speed – for precise positioning choose the ES-24-10D
    • The receiver weighs 3.18 kg – needs a solid mounting point

    Safety and installation notes

    • Receiver relays switch contactor coils only – motor current flows through contactors, not through the remote.
    • Wire the STOP / MAIN relay into the main contactor KM0 circuit: STOP and loss of the radio link must stop the crane (EN 60204-32).
    • Keep limit switches (SQ) and NC interlocks between opposite directions in the control circuit – the remote does not replace them.
    • The receiver supply voltage must match the control circuit voltage.
    • If the crane runs on a frequency inverter, the relays go to the inverter control inputs, not to the motor circuit.
    • Before installation or repair, open the main isolator and lock it out (LOTO).

    Quick selection guide

    10 buttons
    1 speed
    310/410 MHz
    IP65

    Check before ordering:

    • Contactor coil voltage = receiver supply voltage.
    • Check whether 310/410 MHz is permitted in your country.
    • How many directions, speeds and auxiliary functions your crane needs.

    FAQ

    Can the receiver switch a motor directly?
    No. The relays (10 A) are for the control circuit: they switch the contactor coils, and the contactors carry the motor current.
    Which receiver supply voltage should I choose?
    The same as the contactor coil circuit voltage. The base version is 110/220 V AC; other options are 24/48 V AC and 12/24 V DC.
    Is 310/410 MHz permitted in Europe?
    These are frequency versions for the US market; in the EU the 433 MHz band is most common. Check whether the frequency is permitted in your country before use.
    What happens if the radio link is lost?
    Under EN 60204-32 the crane must stop: the STOP/MAIN relay drops out main contactor KM0. Verify this during commissioning.
    Can I get two speeds?
    No, this is a single-speed remote. If you need slow and fast speed, choose the ES-24-10D.
    What batteries does the transmitter use?
    2 × AA. The LED indicator shows when to replace them.

    ES-24-10S – 10 buttons, 1 speed

    A multi-function remote for cranes with single-speed motors. If you need slow positioning, choose the ES-24-10D.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Alternative products

    Copper installation cable NYM | 2×1.5 mm² no PE | 300/500 V | white | 1 m | Lietkabelis KH05VV-U 2x1.5 New item  
    Copper installation cable NYM | 2×1.5 mm² no PE | 300/500 V | white | 1 m | Lietkabelis KH05VV-U 2x1.5
    Code: 92021501
    Price 0.67 € VAT incl.
    ( 0.56 € VAT excl. )
    Add to cart 

  • Subscribtion to new arrivals

    privacy policy

    Information