Insulation resistance tester (Megohmmeter) | 0.01 MΩ–10 TΩ | 100–5000 V | LCD display | AC/DC voltage, current and capacitance measurement

Technical specifications

Measurement range: 0.01 MΩ – 10 TΩ
Accuracy: ±3 % rdg ±5 dgt
Test voltage: 100 V; 250 V; 500 V; 1000 V; 2500 V; 5000 V
Dimensions: 240 × 188 × 85 mm
Operating temperature: -20 °C – +50 °C

Current measurement

DC current range: 0.01 nA – 6 mA
Accuracy: ±5.0 % rdg ±5 dgt

Voltage measurement

DC voltage: 0.0 V – 1000 V
DC accuracy: ±1.5 % rdg ±3 dgt
AC voltage: 0.0 V – 750 V
AC accuracy: ±1.5 % rdg ±3 dgt

Capacitance measurement

Range: 10 nF – 50 µF
Accuracy: ±10 % rdg ±5 dgt

Additional parameters

Output short circuit current: ≥6 mA
Insulation resistance: >10 MΩ
Time resolution: 1 ms

Display

Type: 4-digit large LCD display
Backlight: gray (backlight)

Functions

Insulation resistance measurement (0.01 MΩ – 10 TΩ) – allows checking the insulation condition of cables, electric motors, transformers and electrical installations.

High voltage testing up to 5000 V – helps detect insulation damage and leakage points in electrical equipment.

AC and DC voltage measurement – allows checking the electrical network voltage before performing diagnostics.

DC current measurement – used for analyzing leakage currents and the condition of electrical circuits.

Capacitance measurement – allows evaluating electrical properties of cables and capacitors.

Large LCD display with backlight – ensures clear visibility of measurement results even in poorly lit environments.

Fast and stable measurement – ensures reliable results during electrical equipment diagnostics.

Suitable for operation in harsh conditions – operates at temperatures from -20°C to +50°C, making it suitable for both indoor and outdoor use.

Usage

For electricians: insulation testing of cables before commissioning electrical systems, inspection of electrical installations after installation, fault detection in electrical networks.

For engineers and maintenance specialists: transformer insulation analysis, electric motor insulation testing, industrial equipment diagnostics, maintenance of power systems.

In the energy and industrial sector: inspection of substation equipment, diagnostics of cable lines, monitoring insulation condition of industrial machinery.

For building maintenance specialists: inspection of electrical installations in buildings, accident prevention and electrical safety verification.

For home users: experienced users can use the device for testing old electrical installations, generator or inverter insulation testing, and safety verification of high-power electrical equipment.

Advantages

Very wide insulation measurement range up to 10 TΩ
High test voltage up to 5000 V
Multiple measurement functions integrated in one device
Large and clear LCD display with backlight
Suitable for both industry and energy sector
Stable and accurate measurements
Wide operating temperature range

Disadvantages

High voltage testing requires experience and safety knowledge
Not suitable for beginners without electrical engineering knowledge
Capacitance measurement accuracy is lower than specialized instruments