Interposing relay with socket | 12 V DC coil | 1CO (SPDT) | 6 A | LED | ultra-slim | DIN | LANBOO | ES-LBJ6A12
Code: ES-LBJ6A12Price 10.38 € VAT incl.( 8.58 € VAT excl. )Ultra-slim interposing relay module with socket for DIN rail: 12 V DC coil, 1CO 6 A 250 V AC, LED indication.
-
Interposing relay with socket | 12 V DC coil | 1CO (SPDT) | 6 A | LED | ultra-slim | DIN | LANBOO | ES-LBJ6A12
LANBOO LBJ6A is a pre-assembled interposing relay module: the relay is already fitted into a slim socket with screw terminals and mounts directly on a 35 mm DIN rail. The coil is driven by a 12 V DC signal, and one changeover contact (NO + NC with a common terminal) switches loads up to 6 A 250 V AC.
Key point:
When a controller or PLC output has to switch a 230 V circuit, an interposing relay separates the low-current control side from the load. A module with an integrated socket and LED saves panel space and installation time – no need to assemble the relay and socket separately.Coil
12 V DCContact
1CO (SPDT) – NO + NCContact rating
6 A / 250 V ACMounting
DIN rail, with socketOperating principle
The module snaps onto a 35 mm DIN rail; the control wires connect to coil terminals A1/A2, and the load circuit to the common (COM), normally open (NO) and normally closed (NC) terminals.
When 12 V DC is applied to the coil, the electromagnet switches the contact: COM disconnects from NC and connects to NO, and the LED indicator lights up. When the control signal is removed, a spring returns the contact to its initial position.
Result: the controller or sensor is loaded only by the coil current, while the load is switched by a galvanically isolated contact.
Why choose the LANBOO LBJ6A?
One product replaces both relay and socket, the LED instantly shows whether the PLC signal has arrived, and the slim housing lets you fit many channels in a single DIN row.Technical specifications
Product type Electromechanical interposing relay with socket (relay module) Manufacturer / code LANBOO / ES-LBJ6A12 Series LBJ6A Coil voltage 12 V DC Contact configuration 1CO (SPDT): 1 NO + 1 NC with common terminal Contact rating 6 A / 250 V AC (resistive load) Contact resistance ≤ 50 mΩ Indication LED, coil status Design ultra-slim relay module, relay fitted in socket Mounting 35 mm DIN rail Connection screw terminals Key functions
- Signal isolation – protects the PLC or controller output from the load circuit.
- NO/NC changeover contact – the same relay can switch a circuit on or off.
- LED indication – quick diagnostics without a measuring instrument.
- Integrated socket – mounts straight onto the DIN rail.
- Ultra-slim housing – many channels in a small panel.
Where is it used?
- Expanding discrete outputs of PLCs and logic controllers
- Lighting group control from automation systems
- Fan, pump and damper control circuits
- Control of signal lamps and sirens
- Driving contactor coils from a low-current signal
- HVAC and building automation panels
- Smart home controllers with 12 V DC outputs
Use by need
For automation integrators.
Fast channel expansion in the panel without sourcing sockets and relays separately.For panel builders.
Uniform slim modules line up neatly on the DIN rail and are easy to label.For service electricians.
The LED lets you check on site whether the controller is sending a signal.Practical application
If a PLC 12 V DC transistor output has to switch a 230 V fan of up to 6 A, connect the output to the relay coil and route the fan's phase through the COM–NO contact. The lit LED confirms the command, and the PLC output is loaded only by the coil current.Pros
- Relay and socket in one product
- Ultra-slim housing saves space
- LED status indication
- NO + NC changeover contact
- Direct DIN rail mounting
Cons / limitations
- Contact rating up to 6 A – larger loads require a contactor
- Inductive loads (motors, coils) require a current margin
- Only one changeover contact – for two circuits choose a 2CO relay
Safety and installation notes
- Before installation, disconnect the power and verify that no voltage is present.
- The coil voltage must exactly match the control signal: 12 V DC. A different voltage may damage the relay.
- The load current must not exceed 6 A; leave a margin for inductive loads.
- Route coil and load circuit wiring separately; do not mix SELV and 230 V circuits in one terminal.
- Installation and connection must be carried out by a qualified electrician.
Quick selection guide
Coil: 12 V DC1CO (SPDT)6 A / 250 V ACDIN, with socketLEDSuitable when you need to:- isolate a PLC or controller output from a 230 V load
- switch a signal from NO to NC
- fit many channels into a narrow panel
Check before use:- control signal voltage – 12 V DC
- load current and type (resistive / inductive)
- whether one or two changeover contacts are needed
Important reminder: A relay is not a protective device – it does not protect against overload or short circuit; the circuit must be protected by a circuit breaker or fuse.FAQ
Is a separate socket required?
No, the relay is already fitted into the socket and mounts directly on the DIN rail.What does 1CO (SPDT) mean?
It is one changeover contact with a common terminal and two outputs – normally open (NO) and normally closed (NC).Can it switch a 230 V load?
Yes, provided the load current does not exceed 6 A 250 V AC.Is it suitable for a PLC transistor output?
Yes, if the PLC output voltage is 12 V DC.What is the LED for?
The LED shows that the coil is energised – this speeds up troubleshooting.Does it protect against short circuit?
No, protection requires a circuit breaker or fuse.Interposing relay with socket | 12 V DC coil | 1CO (SPDT) | 6 A | LED | ultra-slim | DIN | LANBOO | ES-LBJ6A12
Ultra-slim LANBOO LBJ6A relay module with socket for DIN rail: 12 V DC coil, 1CO 6 A 250 V AC contact and LED indication – for PLC output isolation and load control in automation panels.
Published: 2026-11-05 · Data verified against the supplier's specification and product marking: 2026-11-05
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Modular photo relay | twilight switch with external sensor | 16 A | 12–240 V AC/DC | 1–50,000 lx | 1CO | DIN | GanzKK | SOU-1/UNICode: SOU-1/UNIDIN rail twilight switch with universal 12–240 V AC/DC supply and external sensor: 1–50,000 lx, 1CO 16 A AC1, 0–2 min delay, 1 module.
Price 42.47 € VAT incl.( 35.10 € VAT excl. )














