LED signal indicator lamp | with push-button type housing | yellow | 22mm | AC 220–230 V | IP65 | for indication in electrical distribution boards, automation systems and equipment
Code: ES-AD22-22DSYPrice 1.92 € VAT incl.( 1.59 € VAT excl. )LED signal indicator lamp is a professional 22 mm mounting diameter indicator designed for fast visualization of equipment status, power supply presence, emergency signals, operating modes, or process stages. This LED pilot lamp features not only bright light visibility, but also an extremely long service life, a high protection class, and universal application in various fields – from simple household electrical boxes to professional industrial automation cabinets, elevator control systems, production lines, or signaling panels.
-
LED signal indicator lamp | with push-button type housing | yellow | 22mm | AC 220–230 V | IP65 | for indication in electrical distribution boards, automation systems and equipment
Compact LED indicator lamp for a Ø 22 mm hole, yellow, supplied with AC 220–230 V. The sealed IP65 front suits panels, control stations and machines exposed to dust or moisture.
Key idea:
The lamp is connected directly to the 220–230 V AC circuit whose status it shows – phase and neutral or in parallel with a contactor coil. Colour meaning according to EN 60204-1: abnormal condition, approaching critical.Mounting hole
Ø 22 mmVoltage
AC 220–230 VLight source
LEDColour
yellowDegree of protection
IP65 (front)Housing
plastic, push-button typeHow it works
The lamp is fitted into a Ø 22 mm hole in the panel door or control station and tightened with a nut from the rear.
When 220–230 V AC is applied to the terminals, the integrated LED lights up. No separate resistor or bulb replacement is needed.
The lamp is an indication element only – it does not switch anything but shows that voltage is present or that a certain event has occurred.
What are the benefits? A sealed IP65 front and low LED consumption – reliable status indication in damp or dusty environments at a low price.Technical specifications
Product type LED signal indicator lamp Mounting hole Ø 22 mm Operating voltage AC 220–230 V Current type AC only Light source integrated LED Colour yellow Degree of protection IP65 (front) Housing material plastic Fixing nut from the rear Purpose status, voltage and fault indication Main functions
- Shows voltage presence or machine status
- Bright LED light visible even in a bright room
- IP65 front protects against dust and water jets
- Standard 22 mm hole – matches 22 mm push buttons and selector switches
Where is it used?
- Distribution and automation panels
- Machine and machine-tool control stations
- Pump, ventilation and heating panels
- Push button and signalling enclosures
Use by need
For the installer. Standard 22 mm hole and 230 V supply – the lamp can be connected directly phase–neutral without additional components.For panel builders. Lamps of the same design in several colours make it possible to mark different statuses according to EN 60204-1.For maintenance. A low-cost, quickly replaceable part – a faulty lamp is replaced within minutes.Practical use
In a pump panel the yellow lamp is connected in parallel with the contactor coil or via the thermal relay contact. Example for this colour: high temperature, low level.Pros- IP65 front
- Low LED consumption, long service life
- Simple 230 V AC connection
- Standard 22 mm hole
Cons- AC 220–230 V only – not suitable for 24 V or 400 V circuits
- No replaceable LED block – the whole lamp is replaced
Safety and installation notes
- Installation and connection must be carried out by a qualified electrician.
- Before installation, disconnect the panel and verify that there is no voltage.
- Do not connect between two phases (400 V) – the lamp will burn out.
- Protect the indication circuit with a separate fuse or circuit breaker.
Quick selection guide
Ø 22 mmAC 220–230 VLEDyellowIP65FAQ
⚡ Can the lamp be connected to 24 V?
No. It is designed for AC 220–230 V only. For 24 V circuits choose 24 V AC/DC lamps.⚡ Can it be connected between phases at 400 V?
No, the lamp will burn out. If there is no neutral, choose 400 V lamps.⚡ What hole size is needed?
A standard Ø 22 mm hole.⚡ Why does the LED glow faintly when the circuit is off?
Usually due to induced voltage in long control wires. Shorten the wires and route them away from power cables.⚡ What does the yellow colour mean?
According to EN 60204-1: abnormal condition, approaching critical.LED signal indicator lamp | with push-button type housing | yellow | 22mm | AC 220–230 V | IP65 | for indication in electrical distribution boards, automation systems and equipment
LED indicator lamp, yellow, Ø 22 mm, AC 220–230 V, IP65 front – reliable status indication for panels and machine control stations. Need indication selected for a whole panel? Send us the diagram – we will select the products and send a quote.
Published: 2026-11-06 · Data according to the manufacturer’s marking: 2026-11-06
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Crane control panel | with 4 buttons | 5A | 120–400V | IP54Code: BPU10-4Button control panels are designed for switching electrical control circuits of lifting mechanisms. The sealed IP54 enclosure is made of heat-resistant ABS plastic with built-in buttons. A protective gland is provided to seal the cable entry, and a sealing gasket is installed between the enclosure and the panel.
The buttons meet the "CE" standard requirements in terms of design and technical specifications.
The remote control panels have passed certification tests and have received serial production conformity certificates.
Available with 2, 4, or 6 buttons.
The housing is made of non-flammable ABS plastic.
The cable entry includes a protective gland that prevents moisture and dust from entering the housing.Price 20.57 € VAT incl.( 17.00 € VAT excl. )Selector switch | 22 mm | 1NO | 2 positions 0-1 | maintained | black | metal | IP40 | Promfactor Baltic | FP Rec2 blCode: FP Rec2 blA knob selector switch for choosing the operating mode, e.g. MANUAL–0–AUTO or ON–OFF.
Price 3.21 € VAT incl.( 2.65 € VAT excl. )Flush push button | 22 mm | 1NO | green | metal | non-illuminated | IP40 | non-latching | Promfactor Baltic | FP PCP grCode: FP PCP grFlush push button Ø 22 mm, 1NO, green, IP40, Promfactor Baltic FP PCP gr. For control circuits: AC-15 6 A / DC-13 0.6 A, Ui 660 V.
Price 2.41 € VAT incl.( 1.99 € VAT excl. )Mushroom push button STOP | 22 mm | 1NC | red | IP40 | latching | Promfactor Baltic | FP CM rCode: FP CM rMushroom push button STOP Ø 22 mm, 1NC, red, IP40, Promfactor Baltic FP CM r. For control circuits: AC-15 6 A / DC-13 0.6 A, Ui 660 V.
Price 4.25 € VAT incl.( 3.51 € VAT excl. )














