LED strip controller | with microwave human presence sensor | 12–24V DC | for CCT LED strip control | 3 channels | for concealed furniture, display cabinet and corridor lighting

LED Strip Controller with Microwave Human Presence Sensor – 12-24V DC, for CCT LED Strips, 3 Channels, 144W

The LED strip controller with a microwave human presence sensor is designed for the automatic control of CCT LED strips in furniture, display cases, corridors, wardrobes, shelving, passageways, and hidden lighting systems. The controller operates on 12-24V DC power, features 3 output channels of 2A each, supports a total load of up to 144W, and utilizes a 24GHz microwave sensor that detects human presence or movement without direct contact.

• Furniture lighting – in wardrobes, kitchen cabinets, shelves, drawers, and niches.
• Display cases and exhibitions – for goods, display shelves, or demonstration zone lighting.
• Corridors and passageways – for automatic light switching when a person approaches.
• Hidden LED lighting – when you want to mount the controller and sensor discreetly.
• Commercial and domestic spaces – in stores, offices, homes, hotels, or technical areas.

For example, the controller is mounted inside a piece of furniture or above a display case, and the CCT LED strip is connected to its outputs. As a person approaches the furniture, display case, or passageway, the microwave sensor detects their presence and automatically turns on the LED lighting.

This solution allows for the creation of convenient, hidden lighting without additional mechanical switches. CCT LED strips provide the ability to control the color temperature of the white light, allowing for the selection of warmer or cooler light depending on the environment.

For Furniture Manufacturers: A suitable solution for LED lighting in wardrobes, kitchen cabinets, display cases, shelves, and niches when automatic lighting without visible switches is desired.

For Electricians: A convenient controller for 12-24V DC CCT LED strip systems where it is necessary to coordinate the power supply, LED strip, load, and sensor detection zone.

For Interior Designers: A useful solution for hidden lighting where aesthetics, automatic operation, and the ability to change the white light color temperature are important.

For Stores and Commercial Spaces: Can be used for lighting display cases, exhibitions, corridors, or customer service areas that only turn on when a person is in the zone.

The controller is intended for low-voltage LED strip systems, so before installation, it is necessary to check the supply voltage, LED strip type, total power, channel current, and mounting location. An incorrectly selected power supply or excessive load can damage the controller or the LED strip.

• Installation must be performed by a qualified electrician or a person knowledgeable in low-voltage LED system wiring.
• Before work, disconnect the power supply and check the wiring polarity.
• Do not exceed 2A per channel and the total maximum load of 144W.
• Controller is designed for 12-24V DC systems – do not connect directly to a 230V mains.
• Power supply must be selected with a power margin, considering the length and power of the LED strip.
• Microwave sensor performance depends on the mounting location, so it is recommended to test the detection zone before finally closing off the furniture or niche.

Quick Selection Guide

The LED strip controller with a microwave human presence sensor is suitable when you need to automatically control CCT LED strips based on human presence or movement. It is a good choice for concealed lighting in furniture, display cases, corridors, wardrobes, shelves, and passageways.

Intelligent Hidden LED Lighting Control for Furniture, Display Cases, and Corridors

The Skydance LED strip controller with a microwave human presence sensor allows for the creation of convenient, automatically operating CCT LED lighting where aesthetics, comfort, and control without visible switches are important.

With 12-24V DC power, 3-channel output, up to 144W power, 24GHz microwave sensor, RF 2.4GHz signal, and 120° detection angle, this controller is suitable for modern furniture, display case, corridor, and hidden lighting projects.