
Lightning discharge digital counter | 100kA | IP68 | FOREND | FLSC-D
Code: FLSC-DPrice 152.46 € VAT incl.( 126.00 € VAT excl. )Lightning strike counter designed to accurately record lightning current discharges. This device is intended to be installed on a lightning protection down conductor and automatically registers each lightning impulse, thus providing important information about system load and the need for inspection. Due to the fact that it does not require a power supply, features a hermetic IP68 enclosure, and has a wide measurement range (1–100 kA), the counter is suitable for both industrial facilities and residential buildings or infrastructure projects.
-
Technical Specifications
Product type: Lightning strike counter
Manufacturer: FOREND ELECTRICAL
Country of origin: Turkey
Measurement range: 1 kA – 100 kA
Counter type: 6-digit analog mechanical
Power supply: not required (autonomous operation)
Testing: possible with a 9V battery
Reset function: none (counter cannot be reset)
Protection class: IP68 (fully sealed)
Operating temperature: -40°C to +60°C
Installation: on lightning down conductor
Mounting method: without cutting the conductor
Dimensions: 113 x 70 x 48 mm
Functions
Lightning strike recording – registers each lightning current impulse from 1kA to 100kA
Autonomous operation – no external power supply or batteries required during use
Clear numerical indication – mechanical counter allows easy reading of recorded strikes
Fast system condition assessment – helps determine if the lightning protection system has been affected
Testing capability – operation can be checked using a simple 9V battery
Sealed housing – IP68 protection ensures reliable outdoor operation
Easy installation – no need to dismantle or cut the conductor
Long-term operation – no electronic moving components, lower failure risk
Applications
Residential users: Used in private homes with lightning protection, helps determine if lightning has struck the building and whether electrical inspection is needed
Electricians: Quick installation without conductor dismantling, convenient additional safety solution for clients, suitable for all lightning protection systems
Engineers/designers: Used in designing lightning protection systems, allows collection of operational data, suitable for industrial, commercial, and infrastructure projects
Industrial & maintenance specialists: Enables monitoring of lightning impact on equipment, used near solar plants, factories, warehouses, telecom towers, and fuel stations
Advantages
No power supply required
Very easy installation
Durable and sealed (IP68)
Wide measurement range
Long-lasting mechanical operation
Easy visual inspection
Suitable for extreme weather conditions
Can be tested on-site
Reliable solution for lightning protection systems
Disadvantages
No reset function
Does not collect detailed data (only count, not time or intensity)
Analog (no digital system integration)
Requires physical access to read values
FAQ
Does this counter require power?
No, it operates fully autonomously and does not require any power source.
Can it be used outdoors?
Yes, IP68 protection ensures full resistance to moisture, dust, and environmental impact.
Can the counter be reset?
No, this model does not have a reset function – all data is permanent.
Is it suitable for all lightning rods?
Yes, it is mounted on standard down conductors without modification.Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Potential equalization busbar | terminal | 4x15 | L+PEN | DIN | IEK | YND10-4-15-125 | 4606056048674Code: YND10-4-15-125The potential equalization busbar is an essential component of an electrical installation, ensuring safe and reliable bonding of different systems. This model is designed for effective potential equalization and protection against overvoltages caused by lightning.
Thanks to its high-quality brass construction, reliable terminals, and secure insulating housing, the busbar is suitable for both residential and industrial electrical systems. Installation is universal – it can be mounted either on a DIN rail or directly inside an electrical distribution board.
Price 17.65 € VAT incl.( 14.59 € VAT excl. )Anti-corrosion paste | 0.5 kg | for grounding rod connections and contact protection | GalmarCode: 11301Anti-corrosion paste designed for use in earthing systems, specifically for grounding rod connection points. The paste helps protect metal connections from corrosion, improves contact between earthing system elements, and facilitates the installation of grounding rods when using a driving head. It is a practical supplementary solution for installing a reliable and long-lasting earthing system.Price 10.12 € VAT incl.( 8.36 € VAT excl. )Surge protective device Type 1+2+3 (B+C+D) | 1P | Iimp 12.5 kA | In 30 kA | Imax 50 kA | Uc 280 V | Up < 1.3 kV | PO I 1Code: SKU#158869360260671971PO I 1 is a single-pole Type 1+2+3 (B+C+D) surge protective device: incomer and fine protection stages in one 2.5-module housing. Iimp 12.5 kA (10/350 µs), In 30 kA, Imax 50 kA, Up < 1.3 kV, Uc 280 V.
Price 34.09 € VAT incl.( 28.18 € VAT excl. )













