LOTO Safety lockout hasp with cable | 6 padlock holes | red | steel/plastic

Safety Multi-Padlock Cable Lockout | 2 m | Ø4.3 mm | up to 6 padlocks

Adjustable safety multi-padlock cable lockout with a flexible 2 m steel cable, designed for locking various isolation points. The lockout can be used with up to 6 padlocks, allowing the same isolation point to be controlled simultaneously by up to 6 workers. The Ø4.3 mm cable is covered with a protective PVC coating, and its working length can be adjusted by opening the lockout handle.

This is a cable-type multi-padlock safety lockout designed for situations where one isolation point must be controlled by several workers. The flexible, adjustable-length cable allows adaptation to different lockout locations, while six padlock holes allow up to 6 individual padlocks to be used at the same time.

Each of up to 6 workers can attach their own individual padlock. As long as at least one padlock remains locked, the shared lockout device cannot be fully released.

• Steel cable provides mechanical strength.
• Cable diameter – Ø4.3 mm.
• Total cable length – 2 m.
• The outer PVC layer protects the metal cable from external environmental effects.
• The cable is flexible and can be adapted to lockout points of different shapes.
• The working cable length is adjusted by opening the handle.

The body is made of engineering plastic, providing rigidity, impact resistance and resistance to corrosive environmental effects. The construction is combined with a flexible steel cable and six holes for padlocks.

The total cable length is 2 m, but the working length can be adjusted. When the lockout handle is opened, the cable is set according to the size of the specific lockout point, and when the handle is closed, it is secured in the selected position.

• Cable safety lockout.
• Up to 6 padlocks at the same time.
• Individual lockout control for up to 6 workers.
• 2 m cable length.
• Ø4.3 mm cable diameter.
• Adjustable working cable length.
• Steel cable.
• Protective PVC cable coating.
• Engineering plastic body.
• Operating temperature from −20 °C to +90 °C.

• For locking various isolation points.
• For locking industrial equipment.
• For electrical disconnect points.
• For valves and gate valves that can be wrapped with the cable.
• For connecting several isolation points with one cable.
• For situations where one lockout location must be controlled by several workers.

1. Open the lockout handle.
2. Route the cable around or through the required isolation points.
3. Adjust the working cable length.
4. Close the handle and secure the cable in the selected position.
5. Insert the required number of padlocks into the separate holes in the body.
6. Check that the cable cannot be released without opening the padlocks.

• Before use, check the condition of the cable, body and padlocks.
• Route the cable so that the isolated element cannot be operated without releasing it.
• After adjusting the cable length, check that it is properly secured.
• Do not exceed 6 padlocks.
• Before use, make sure that the Ø4.3 mm cable is suitable for the specific lockout point.
• Use only within the stated temperature range of −20 °C to +90 °C.

Safety Multi-Padlock Cable Lockout | 2 m | Ø4.3 mm | up to 6 padlocks

Adjustable cable safety lockout with a 2 m long, Ø4.3 mm steel cable covered with a protective PVC coating. Six padlock holes allow the same isolation point to be controlled simultaneously by up to 6 workers. The working cable length is adjusted by opening the handle, while the stated operating temperature range is from −20 °C to +90 °C.