Products catalog

  • Modular | Digital Voltage Monitoring Relay for Solar Power | Photovoltaic Systems | 1F | 16A | 230–270V | DIN | VP-16Af DigiTOP

    Code: VP-16Af
    Barcode: 4820118380537

    The DigiTOP VP-16Af single-phase voltage relay is an advanced protection solution designed for photovoltaic (solar) power plants and household electrical equipment. It automatically disconnects the load when the permissible voltage level is exceeded, thereby protecting devices from voltage surges, overloads, or dangerous grid disturbances. This relay is particularly relevant in photovoltaic installations where intense sunlight and low consumption can increase voltage levels and damage appliances or network equipment.

  • Technical Specifications:

    Type: Single‑phase overvoltage protection relay

    Designed for use with: Photovoltaic systems and household appliances

    Nominal load: 10 A

    Maximum load: 16 A

    Operating voltage: 50–400 V AC

    Mains frequency: 50 Hz

    Disconnection time: 0.02 s

    Adjustable switching-off voltage range: 230–270 V (1 V increments)

    Hysteresis (voltage drop difference): 1–10 V (1 V increments)

    Switch‑on delay time: 0–10 s (1 s increments)

    Contact configuration: Changeover contact (NO + NC)

    Mounting: 2‑module width, DIN‑rail

    Functions:

    Monitors mains voltage in real time and reacts to overvoltage

    Automatically disconnects load when voltage exceeds threshold

    Allows connecting an auxiliary load during overvoltage (e.g., resistor or energy sink)

    Three programmable parameters:
    – Upper voltage disconnection threshold
    – Hysteresis (gap between ON and OFF)
    – Switch‑on delay

    Extremely fast response—only 20 ms

    Applications:

    In photovoltaic plants, where protection from high voltage is needed

    Protection of household appliances such as refrigerators, air‑conditioners, chargers

    In industrial sites prone to sudden voltage fluctuations

    In renewable energy installations with unpredictable loads

    Automatic protection against voltage spikes, a common issue in rural areas or buildings with old infrastructure

    Pros:

    Fast response time

    Programmable settings – customizable for different scenarios

    Versatile – suitable for both homes and photovoltaic systems

    Easy DIN‑rail installation

    Cons:

    No protection against undervoltage

    Designed for single‑phase systems only

    Requires proper programming – incorrect settings may cause unnecessary disconnection

    Description:

    The DigiTOP VP‑16Af is a smart, reliable, and cost‑effective voltage protection relay, ideal for photovoltaic systems and safeguarding household appliances. Its easy installation, programmable settings, and ultra‑fast reaction make it an indispensable solution for anyone wanting to protect their equipment from grid disturbances. A guarantee of safety for both professionals and everyday users. 

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

  • Subscribtion to new arrivals

    privacy policy

    Information