Products catalog

  • Modular | digital voltage monitoring relay for solar power | photovoltaic systems | 3-phase | 16A | 170-270V | DIN | VP-3F10Af DigiTOP

    Code: VP-3F10Af
    Barcode: 4820118380513

    DigiTOP VP-3F10Af is a three-phase voltage relay designed for use in photovoltaic (solar energy) systems to protect both single-phase and three-phase equipment from overvoltage. It is a universal and reliable solution for installers, engineers, and home users looking for efficient voltage control and automatic circuit management.

    The relay not only disconnects the load during overvoltage conditions but can also automatically activate an additional load when the voltage exceeds a set threshold. This helps protect equipment, extend its service life, and ensure efficient energy distribution in solar power systems. 

  • Technical Specifications:

    Network type: 3‑phase / 3 single‑phase
    Nominal current: 3 × 10 A
    Maximum current: 3 × 16 A
    Operating voltage: 50–400 V AC
    Frequency: 50 Hz
    Upper disconnect voltage: 170–270 V (step 1 V)
    Hysteresis (voltage drop threshold): 1–50 V (step 1 V)
    Switch‑on delay: 0–90 s (step 1 s)
    Disconnect time after threshold exceedance: 0.02 s
    Contact type: 3 changeover contacts (NO + NC)
    Mounting: 3‑module width, DIN rail

    Main functions:

    Protects equipment from over‑voltage on the line

    Selectable operation mode: single‑phase or three‑phase

    Programmable values: disconnect threshold, hysteresis, switch‑on delay

    Ultra‑fast response – only 0.02 s

    Can switch off/on an auxiliary load in case of over‑voltage

    Independent control of three phases enables precise energy distribution

    Easy DIN‑rail installation

    Applications:

    Photovoltaic systems – protection against grid over‑voltage

    Residential and commercial solar‑powered installations

    Industrial sites requiring voltage stability

    Energy‑consumption control – can automatically engage an auxiliary consumer in over‑voltage conditions

    Backup systems – to disconnect sensitive equipment under critical conditions

    Pros:

    Universal operating mode – three‑phase or three single‑phase devices

    Programmable control – adaptable to different projects

    Instant reaction – protection activates within 20 ms

    Easy to install and configure

    Helps to avoid equipment malfunction and electrical losses

    Suitable for both homeowners and professional engineers

    Cons:

    Cannot serve as under‑voltage protection

    Requires technical understanding for programming

    DigiTOP VP‑3F10Af – a reliable and flexible voltage‑control solution for photovoltaic systems. It guarantees the safety of operating equipment and enables intelligent energy‑flow management. Thanks to its technical capabilities and programmability, the relay is ideal for both professional installers and advanced homeowners who value safety and efficiency in their solar energy systems. 

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Network plug | RJ45 connector (8P8C) | for UTP CAT 6e cable | unshielded | through-plug | transparent
    Code: WT117

    This RJ45 Cat.6 UTP modular plug is a high-quality 8P8C unshielded network connector type, designed for Cat.6 UTP (Unshielded Twisted Pair) cables. The special straight-through design makes cable termination easier and more convenient, as the wires can be threaded through the plug, allowing a visual check of the wire arrangement before crimping the connector.

    Price 0.20 € VAT incl.
    ( 0.17 € VAT excl. )
    U-FTP Cable | 6A CAT | 4x2x23 AWG | shielded | copper | UV resistant | outdoor use | black
    Code: KIF6AOUTS500

    The U/FTP cable is a high-quality four-pair data transmission cable designed for telecommunication, industrial, and outdoor network installations. This cable is 100% copper, ensuring maximum signal transmission efficiency and minimal signal attenuation.

    It is adapted for 10 Gigabit Ethernet (10GBASE-T) data transmission at speeds of up to 10,000 Mbps and provides high electromagnetic resistance, as each pair is shielded with aluminum foil. Thanks to the PE outer layer, the cable is resistant to moisture, UV radiation, and mechanical impact, making it ideal for outdoor installations. 

    Price 0.73 € VAT incl.
    ( 0.60 € VAT excl. )
    Solar PV cable | H1Z2Z2-K | 1x4 mm² | black | 1.5 kV DC | EN 50618 | Dca | IEMMEQU HAR
    Code: H1Z2Z2K

    The cable is designed for connecting photovoltaic (solar energy) systems and interconnecting solar modules. This cable offers excellent resistance to ultraviolet (UV) rays, ozone, atmospheric effects, and temperature fluctuations. A durable and flexible single-core copper cable with double insulation ensures long service life and safe use even in the most challenging outdoor conditions. Suitable for installation both indoors and outdoors.

    Price 0.98 € VAT incl.
    ( 0.81 € VAT excl. )
  • privacy policy

    Information