
Mushroom push button with key release | 22 mm | 1NC | maintained | red | metal | IP40 | Promfactor Baltic | FP CMKL r
Code: FP CMKL rPrice 4.38 € VAT incl.( 3.62 € VAT excl. )A latching mushroom STOP button that can be released only with a key. This prevents unauthorised restarting after a stop.
-
Mushroom push button with key release | 22 mm | 1NC | maintained | red | metal | IP40 | Promfactor Baltic | FP CMKL r
A latching mushroom STOP button that can be released only with a key. This prevents unauthorised restarting after a stop.
How it works
When the mushroom is pressed, the NC contact opens the control circuit and the button latches. It can be released only by turning the key, so only an authorised person can restart the equipment.
Technical data
Product type Mushroom push button with key release Manufacturer / code Promfactor Baltic / FP CMKL r Contacts 1NC Action maintained Colour red LED illumination none Front ring metal Degree of protection IP40 front Insulation voltage Ui 660 V Standard IEC/EN 60947-5 Mounting hole Ø 22 mm Where is it used?
- Stopping equipment where only an authorised person may restart it
- Control desks in public or accessible areas
- Locking out for service in the control circuit
Safety and installation notes
- Installation by a qualified electrician after disconnecting the voltage and verifying that there is none.
- The switch is intended for the control circuit: motor current is switched by a contactor.
- For machine emergency stopping use only a device compliant with EN ISO 13850 / IEC 60947-5-5, via a safety relay.
Mushroom push button with key release | 22 mm | 1NC | maintained | red | metal | IP40 | Promfactor Baltic | FP CMKL r
FP CMKL r is a Promfactor Baltic FP series device for a Ø 22 mm hole. Need buttons, switches and lamps for a whole panel? Send us the diagram – we will select them and send a quote.
Published: 2026-11-06 · Data verified against the manufacturer marking and FP series data: 2026-11-06
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.ManufacturerThis product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Crane control panel | with 4 buttons | 5A | 120–400V | IP54Code: BPU10-4Button control panels are designed for switching electrical control circuits of lifting mechanisms. The sealed IP54 enclosure is made of heat-resistant ABS plastic with built-in buttons. A protective gland is provided to seal the cable entry, and a sealing gasket is installed between the enclosure and the panel.
The buttons meet the "CE" standard requirements in terms of design and technical specifications.
The remote control panels have passed certification tests and have received serial production conformity certificates.
Available with 2, 4, or 6 buttons.
The housing is made of non-flammable ABS plastic.
The cable entry includes a protective gland that prevents moisture and dust from entering the housing.Price 20.57 € VAT incl.( 17.00 € VAT excl. )









