Passive Franklin lightning rod | aluminum alloy | telescopic | 2500mm | (16/10mm)

Active lightning protection – the active lightning rod is raised at the highest point of the building. This system attracts the forming lightning and directs all the current away from other elements of the building. The activity occurs only during a lightning discharge. When choosing an active lightning rod, pay attention to whether the lightning receiver has electronics (can withstand up to 115kA, but may fail if the discharge exceeds the limits) or no electronics (can withstand any strength and number of lightning discharges). Used for the protection of industrial complexes, buildings, residential houses, estates, warehouses, and stadiums. 

Passive lightning protection – metal elements installed on the roof (traditional "Franklin" lightning rod). During a lightning strike, the current flows through this metal system into the ground. Typically, galvanized steel wire is used, which is laid along the entire roof length and dropped to the ground. Occasionally, copper wire is used, but due to cost differences, users usually opt for steel, which is cheaper. Around the building, a galvanized steel grounding strip is laid underground.

A lightning rod protects buildings and people from the effects of lightning, but does not protect equipment. Therefore, it is essential to install surge protection.

This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.

CE certification means that the product has been evaluated according to the main criteria:

Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purpose

CE marking allows this product to:

be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environments

The CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.

What does this mean for you as a buyer?

Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions